Bits & Sockets Sets Bosch

Up to 5x faster than a standard adapterHole saws are a great accessory, but attaching them to your drill was always a fiddly job to do accurately. This costs professionals time and money. With the Exp more→ert Power Change Plus, you can switch hole saws in seconds thanks to Bosch’s clever one click arbour.This keyless system does not require fixing with screws or bolts. You just pull one hole saw out and push another in. Despite this apparent simplicity, the Expert Power Change Plus still gives a firm connection: with a reinforced shank and close-fitting guide drill, it actually has less play than conventional systems.The Bosch Expert Power Change Plus Hole Saw System is designed to give hole saw us…

Included: 1x PZ1, 2x PZ2, 1x PZ3, 1x PH1, 2x PH2, 1x PH3, 1x T15, 1x T20, 1x T25, 1x T30, 1x SL4, 1x SL5.5, 1x SL5.5, 1x SL6.5, 1x H3, 1x H4, 1x H5, 1x H6
Magnetic Bit Holder: The magnetic hold more→er keeps bits securely in place while in use
Wide Application Range: The screwdriver bit set contains bits suitable for screwing in the most commonly used screws with Phillips, Pozidriv, Torx, Slotted and Hexagon heads
Quick Access To Bits: Thanks to the sturdy carabiner, the bit set can be attached to pants, keeping the bits always within reach for quick and easy access
Universal Compatibility: The drill bits have a ¼ in external hex shank and are compatible with drills and manual screwdrivers from a…

The SDS max-7 Drill Bit is ideal for use at the highest drilling speeds. Its solid carbide S-cutter and inclined side cutters enable very fast drilling. Furthermore, the bit´s vibration-optimised flut more→e design offers the best power transfer and increases in speed. This product is intended for use in concrete and reinforced concrete, limestone and masonry. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. I…

It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are more→achievable thanks to the bit´s S2 Modified Steel and an optimised heat treatment process resulting in extra-hard quality, enabling adequate performance in all tasks. The bit´s tapered torsion zone copes easily with torque peaks as it absorbs force and vibrations when screw-driving and thus fulfilling all tasks. • Universal Use • The Extra Hard Screwdriver Bit is a good choice for universal use • S2 Modified Steel and an optimised heat treatment process results in extra-hard quality fo…

The BOSCH PROFESSIONAL SDS Plus-5 20x400x450 mm Multi-Material Drill Grey is a high-quality drill bit designed for professional use. It is suitable for drilling into various materials, including concr more→ete, masonry, wood, and metal. The drill bit features SDS Plus technology, which enables quick and easy bit changes without the need for additional tools.The drill bit has a diameter of 20 mm, a length of 400 mm, and an overall length of 450 mm, providing a long reach and allowing for deep drilling. Its grey color adds a sleek and professional appearance, making it a favorite among electric tools accessories.This Multi-Material Drill is equipped with a specially designed 4-flute spiral geometry,…

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Features & Benefits:• Tool-free conversion -- Quick clamp system allows removal of motor from base to base• Plunge Lock release level - conveniently located to allow maximum control, springs more→to locked position for ease of use• Fine adjustment on depth rod for accurate depth• Smooth plunge action• 7 step adjustable depth stop turret, plus microfine adjustment on depth rod• Transparent subbase for enhanced visibilitySpecifications:Plunge Depth: 55mmSub-Base Opening: 54mmMaximum bit diameter: 44mmFor use with GFK 600 router

22 x 400 x 450mm Drill Bit The Bosch SDS-Plus-3; 22x400x450mm with entring tip and 4-flute design, Suitable for masonry and concrete. 4-flute design Rienforced core section 2-cutter

It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are more→achievable thanks to the bit´s S2 Modified Steel and an optimised heat treatment process resulting in extra-hard quality, enabling adequate performance in all tasks. The bit´s tapered torsion zone copes easily with torque peaks as it absorbs force and vibrations when screw-driving and thus fulfilling all tasks. Drive ISO 1173 C6.3, 1/4" external hex shank • Universal Use • The Extra Hard Screwdriver Bit is a good choice for universal use • S2 Modified Steel and an optimised heat tr…

The SDS max-9 BreakThrough Drill Bit is standard when drilling large and deep holes in concrete. Its 3-cutter tip made from fine-grade carbide is vacuum-brazed and hardened to enable fast results and more→good removal of large pieces of material. The bit´s long tapered shank makes breakthrough-drilling possible, while its 2-flute U-shape design provides good dust removal. The bit is intended for breakthroughs with diameters from 45 mm to 80 mm in concrete, masonry and limestone, e.g. for fixing cables and pipes outside. Note: Always ensure that you use hammer drills with suitable capacity for breakthrough-drill bits to avoid overload. Observe the operating instructions of the rotary hammer. It is i…

The BOSCH PROFESSIONAL Hex-9 HardCeramic + CYL-3 Ceramic Drill Bit Set is a high-quality set of drill bits designed for professional use. This set includes 5 drill bits, each featuring a grey color an more→d made with durable materials to ensure long-lasting performance.The Hex-9 HardCeramic drill bits are specially engineered with a unique hex shank design, which allows for a secure grip in the drill chuck and prevents slippage during drilling. These drill bits are made of hard ceramic material, making them extremely resistant to heat and wear. This design feature ensures that the drill bits maintain their sharpness and durability even when drilling through tough materials like porcelain, ceramic …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are more→achievable thanks to the bit´s S2 Modified Steel and an optimised heat treatment process resulting in extra-hard quality, enabling adequate performance in all tasks. The bit´s tapered torsion zone copes easily with torque peaks as it absorbs force and vibrations when screw-driving and thus fulfilling all tasks.Drive ISO 1173 E6.3, 1/4" hex shank with spring ring for screw gun MA55• Universal Use• The Extra Hard Screwdriver Bit is a good choice for universal use• S2 Modified Steel an…

Bosch 2608831019 SDS plus-3 Drill Bit For Masonry 8.0 x 100 x 160mm The Bosch 2608831019 is a single SDS plus-3 drill bit with a diameter of 8.0mm and a working depth of 100mm. The drill bit is suited more→to drilling in masonry and concrete. It is extremely long-lasting and wear-resistant thanks to its high-alloy steel construction and feature a 4-flute dura design which provides effective dust removal for optimised drilling performance. For use with rotary hammers with SDS plus holders. Features:
- SDS plus-3 Drill Bit offers durability while drilling concrete
- 4-flute dura design provides effective dust removal for increased endurance
- High-alloy steel produced with optimised hardening …

It has a 1/4-inch external hex shank and is intended for universal screw-driving with screwdrivers and drill drivers. This Extra Hard Screwdriver Bit is a good choice for universal use. All tasks are more→achievable thanks to the bit´s S2 Modified Steel and an optimised heat treatment process resulting in extra-hard quality, enabling adequate performance in all tasks. The bit´s tapered torsion zone copes easily with torque peaks as it absorbs force and vibrations when screw-driving and thus fulfilling all tasks. 3-piece screwdriver bit pack, Extra Hard version (Torx®) • Universal Use • The Extra Hard Screwdriver Bit is a good choice for universal use • S2 Modified Steel and an opt…

Wood Drill