United Kingdom
Catalog   /   Tools & Gardening   /   Power Tools   /   Power Tool Accessories

Power Tool Accessories

 prices on 7907 models  
Show
Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals.Specifications:Shank diameter - 3.2 mmWorking diameter - 0.8 mmMaximum RPM: 35.000 1/minPack of 3
from £4.00 up to £6.49 
Compare prices and buy Dremel 105 Engraving Tip 0.8mm Pack of 3
£4.00
£4.00
£6.00
£6.00
Compare prices4
The drywall cutting bit 560 gives you fast clean cuts in drywall. The multipurpose cutting bit 561 cuts wood, plastic, fiberglass, drywall, laminate & vinyl siding. The tile cutting bit 562 cuts ceramic wall tile, cement board and blaster. (Not for use on floor tile)Specifications:Shank diameter: 3,2 mm Working diameter: 3,2 mm Pack of 3
from £5.39 up to £9.95 
Compare prices and buy Dremel 561 Multi Purpose Cutting Bit 3.2mm Pack of 3
£5.00
£7.00
£10.00
£10.00
Compare prices4
Milling Accessory
£20.04
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
This router bit set contains all 7 of Dremel's high-quality routing accessories for performing a diverse range of routing applications The Dremel 26150660JA 260 router bit set contains a variety of Dremel's most popular routing accessories for use with multi tools. Router bits for edge, corner, straight, keyhole, word & letter routing are all included and are suitable for use on many materials like Hardwood, Softwood, Plywood and Laminates.  Features:
- A 7 piece high-quality Dremel router bits set for use with Dremel multi-tools
- With this accessory set, you can perform a diverse range of routing applications; Edge, Corner, Straight, Keyhole, Word & Letter Routing
- Suitable for use i…
from £26.21 up to £38.95 
Compare prices and buy Dremel 26150660JA Multipurpose Router Bit Set (7 Piece)
£26.00
£26.00
£35.00
£36.00
£38.00
Compare prices7
For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.Specifications:Shank diameter: 2,4 mmWorking diameter: 4,4 mmPack of 2
from £11.40 up to £17.95 
Compare prices and buy Dremel 7105 4.4mm Diamond Wheel Point 4.4mm Pack of 2
£11.00
£14.00
£16.00
£18.00
£18.00
Compare prices5
Diamond Engraving Point. For usage with the Dremel Engraver 290. The Diamond Engraving Point 9929 has a longer lifespan and is for use on harder materials such as glass.Features:• Diamond Coated Tip• Longer Life Span• For use on Harder Materials• Trusted Dremel Quality
from £12.50 up to £17.95 
Compare prices and buy Dremel 9929 Diamond Coated Engraving Tip for 290 Engraver
£13.00
£13.00
£15.00
£18.00
£18.00
Compare prices5
High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.Specifications:Shank diameter - 3.2 mmWorking diameter - 3.2 mmPack of 2
from £4.93 up to £7.95 
Compare prices and buy Dremel 194 High Speed Straight Cutter 3.2mm Pack of 2
£5.00
£5.00
£8.00
£8.00
Compare prices4
The Dremel 566 Ceramic Tile Cutting Kit attaches easily to your Dremel Drill and holds it upright to ensure perfectly vertical cutting of ceramic wall tiles. Controlled cutting of ceramic wall tiles Easily attaches to your Dremel tool Easy depth adjustment up to 19 mm material thickness. Supplied complete with cutting bit
from £12.23 up to £24.95 
Compare prices and buy Dremel Wall Tile Cutting Kit REF.566 - 2615056632
£12.00
£17.00
£25.00
Compare prices3
The Dremel 575 Angle Adaptor is designed for improving access in difficult workspaces, letting you run accessories perpendicular to the motor in one of 12 different positions. Features & Benefits • Lets you operate accessories at a right angle to the machine • Ball bearings & spiral bevel gears for optimum performance and lifetime • Coupling system allows to place the attachment in one of 12 positions on the multi tool • Quick connect; attaches to your Dremel in seconds Contents • 575 Right Angle Attachment • Driver Cap
from £26.99 up to £31.95 
Compare prices and buy Dremel 575 Rotary Multi Tool Right Angle Attachment 2615S575JB
£27.00
£27.00
£32.00
£32.00
Compare prices4
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• Piloted Beading Bit • A decorative bit for detailed edges Specifications:Shank diameter: 3,2 mm Working diameter: 9,5 mm Usage: Piloted Beading
from £10.00 up to £16.95 
Compare prices and buy Dremel 612 Piloted Beading Router Bit 2.8mm Pack of 1
£10.00
£12.00
£15.00
£17.00
£17.00
Compare prices5
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• V-Groove Bit• For sign word and lettering Specifications:Shank diameter: 3,2 mm Working diameter: 6,4 mm Usage: V-GrooveMaximum RPM: 35.000 1/min
from £6.59 up to £8.95 
Compare prices and buy Dremel 640 V Groove Router Bit 6.4mm Pack of 1
£7.00
£7.00
£9.00
£9.00
Compare prices4
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• Straight Bits • General purpose routing or grooving Specifications:Shank diameter: 3,2 mm Working diameter: 3,2 mm Usage: StraightMaximum RPM: 35.000 1/min
from £6.29 up to £7.95 
Compare prices and buy Dremel 650 Straight Router Bit 3.2mm Pack of 1
£6.00
£6.00
£8.00
£8.00
Compare prices4
Straight Bits. General purpose routing or grooving.Features & Benefits:• Straight Bits • General purpose routing or grooving Technical specifications:Shank diameter: 3,2 mm Working diameter: 4,8 mm Usage: StraightMaximum RPM: 35.000 1/min
from £7.19 up to £8.95 
Compare prices and buy Dremel 650 Straight Router Bit 4.8mm Pack of 1 652
£7.00
£7.00
£9.00
£9.00
Compare prices4
Piloted Corner Rounding Bit. Rounding over edges and corners. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 6.4mm. Working length: 2mm Accessory length: 36mm Usage: straight. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231
from £6.96 up to £6.99 
Compare prices and buy Dremel 6.4MM HSS Straight Router Bit REF.654 - 2615065432
£7.00
£7.00
Compare prices2
For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features & Benefits:• Keyhole router bit • For routing, mounting slots in picture frames or anything that needs to be hungSpecifications:Shank diameter: 3,2 mm Working diameter: 8,0 mm Usage: Keyhole router bit
from £12.95 up to £17.95 
Compare prices and buy Dremel 655 Keyhole Router Bit 8mm Pack of 1
£13.00
£14.00
£15.00
£18.00
£18.00
Compare prices5
For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.Specifications:Shank diameter: 2,4 mmWorking diameter: 2,0 mmPack of 2
from £9.29 up to £13.95 
Compare prices and buy Dremel 7134 2mm Diamond Wheel Point 2mm Pack of 2
£9.00
£11.00
£14.00
£14.00
Compare prices4
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min
from £7.59 up to £10.95 
Compare prices and buy Dremel 9901 Tungsten Carbide Straight Cutter 3.2mm Pack of 1
£8.00
£8.00
£11.00
£11.00
Compare prices4
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min
from £7.43 up to £10.95 
Compare prices and buy Dremel 9903 Tungsten Carbide Pointed Cutter 3.2mm Pack of 1
£7.00
£7.00
£8.00
£11.00
£11.00
Compare prices5
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min
from £7.99 up to £10.95 
Compare prices and buy Dremel 9905 Tungsten Carbide Spherical Cutter 3.2mm Pack of 1
£8.00
£9.00
£11.00
£11.00
Compare prices4
Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min
from £7.59 up to £10.95 
Compare prices and buy Dremel 9911 Tungsten Carbide Egg Cutter 3.2mm Pack of 1
£8.00
£8.00
£11.00
£11.00
Compare prices4
Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, leather, ceramic tile. Shank Diameter: 3.2mm. working Diameter: 7.8mm. Accessory length: 40mm. Maximum speed: 35,000rpm.
from £13.39 up to £18.99 
Compare prices and buy Dremel 7.8mm Coned Structured Tooth Tungsten Carbide Cutter REF.9934 - 261
£13.00
£16.00
£19.00
Compare prices3
Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 19,0 mmMaximum RPM: 35.000 1/min
from £17.50 up to £21.95 
Compare prices and buy Dremel 9936 Tungsten Carbide Wheel Cutter 19mm Pack of 1
£18.00
£19.00
£20.00
£22.00
£22.00
Compare prices5
Mandrel for Dremel EZ SpeedClic accessories. Specifications • Shank diameter - 3.2mm • Maximum RPM: 35.000 1/min
from £7.99 up to £10.99 
Compare prices and buy Dremel SC402 EZ SpeedClic Mandrel
£8.00
£11.00
£11.00
£11.00
Compare prices4
9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min
from £7.59 up to £10.95 
Compare prices and buy Dremel 9910 3.20mm Speer Tip Tungsten Carbide Cutter
£8.00
£9.00
£11.00
£11.00
Compare prices4
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type