Amplifiers

Stereo headphone amplifier. 4 separate headphone amplifiers in one housing. 1 level control each per amplifier. 6.3 mm stereo input. 6.3 mm stereo outputs. Frequency range: 20 - 20000 Hz. Input signal: 300 mV. Output signal: 2 x 16 mW/8 Ohm, 2 x 35 mW/32 Ohm, 2 x 15 mW/600 Ohm (per headphone). S/N ratio: 64 dB. THD: 0,1 %. Power supply: via encl. plug-in power supply. Dimensions: 117 x 93 x 40 mm. Weight: 560 g. Colour: Black
Impedance: 32 Ohm
USB: No
Headphone Output: Yes
Colour: Black
Made in: China
Inputs: Jack TRS 6,3mm
Frequency Range: 20 Hz - 20 kHz
Number of Channels: 4
UK/EU Power supply included: Yes
Outputs: Headphone Jack 6,3mm
Power Supply: Adapter
Battery Operation: No…

Adastra 953.085UK audio amplifier 8.0 channels Black

Adastra 953.083UK

dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and groundloop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output …

MOOER is excited to announce the new GTRS PTNR Mini Bluetooth amplifier, the ultimate companion to MOOER’s GTRS Guitar. The PTNR “Partner” amplifier is a lightweight, compact amplifier offering easy connection of external devices via Bluetooth and instrument connection utilizing the 1/4” input jack. The 2000 mAh battery means you can take it on the go and jam for up to 7 hours before needing a charge.The amp itself is a 5-Watt amplifier pumping through a 2.2” speaker with 4-ohm impedance and a vibrating diaphragm tuned for bass frequencies that sound great despite a compact form-factor. Charging your PTNR is convenient as it uses a USB-C charging port that follows …

Balanced Line Output Switch. Palmer PEABO is a Balanced Line Output Switch with two inputs and one output. Thus, it is the perfect choice for routing a signal to either one of two possible inputs. Switch your vocal mic between the FOH and monitor mixing desk to communicate with the monitor mixer or the band on stage. Two different sound configurations: to switch between different effects or sounds on your microphone, e.g. a "telephone effect" or more levels of reverb. Run the outputs of the PEABO into two channels of the mixing desk, that you can configure differently. Now you can freely toggle between them on-stage at any time. You can also use the PEABO to route the signal to two rooms or …

The iFi Audio Go Link Headphone Amp & DAC is the latest addition to iFis GO series and a game-changer for wired headphone users. This ultraportable DAC/headphone amp dongle links corded headphones and earphones to digital devices that lack a 3.5mm headphone output. But its not just a connector; the GO link significantly enhances sound quality with its sophisticated digital-to-analogue converter and headphone amp circuitry outperforming the audio tech in mobile devices and computers.

From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage. Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with Built-Like-A-Tank™ construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes. With four models to choose fr…

Microphone Pre-Amp / Desktop

Compact one-channel microphone preamplifier with switchable 30V phantom power that provides one balanced microphone input and one balanced 6.3 mm input. It also features a Gain control up to 50 dB, and clip LED indicators. Dimensions: 113 x 92 x 40 mm. Weight: 345 g.
Power Supply: Adapter
Frequency Range: 10 Hz - 30 kHz
Battery Operation: No
Made in: China
UK/EU Power supply included: No
Microphone Input: Yes
Phantom Power: Yes

Phantom power adapter that runs on AA batteries and provides powering for electret condenser microphones when phantom power is not available. It features an on/off switch and a bass rolloff filter. Connectors are standard XLRm to mini XLRm. It can be used with various Audix microphones, including the ADX20iP, ADX40, ADX60, f90, MicroD, or MicroHP models.
Made in: China