Amplifiers

Rocksolid, roadworthy passive DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. It also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. It features a 600Ohm XLR output jack, switchable ground lift and switchable input attenuation – 0 dB,20 dB and40 dB. Frequency response: 10 Hz50 kHz. Instrument input: 50k Ohm. Parallel link jack: 50k Ohm. Dimensions: 76.2 x 127 x 50.8 mm.
UK/EU Power supply included: No
Type: DI Box
Number of Outputs: 1
Made in: China
Number of Input Ports: 2
Rackmountable: No…

Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Colour: Black.
Type: DI Box
Battery Operation: Yes
Made in: China
UK/EU Power supply included: No

Headphone Amp

DI Box / Desktop / Number of Channels 1 / Rack Height 1 RU

Signal Splitter / Desktop / Number of Channels 1

Adastra 953.081UK

The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
Made in: China
Rackmountable: No
Type: DI Box
Number of I…

Portable 6 W combo amplifier / monitor for electric guitar, which provides an excellent sound reference for the music you create. It connects directly to the guitar using a rubber suction cup and is powered by a built-in rechargeable lithium-ion battery, which allows 3.5 hours of operation on a single charge. It is equipped with a 40 mm speaker with a neodymium magnet and offers presets of guitar DSP effects - Phaser, overdrive and reverb. The amplifier is made with a plastic ABS cover and a flexible rubber outer cover with a suction cup. The package also includes a micro USB cable for charging the internal battery and a 6.3 mm-3.5 mm mono guitar cable for connecting the device to the instrument.…

Quite a bit of gear relies on Phantom Power to work these days, and the number is always growing. When you need a reliable power source, the M48 Phantom Power Supply is just the tool for the job. Perfect for all of your gear that requires Phantom Power like condenser mics. With a single XLR input and XLR output, get connected quickly. No guessing if it's working or how the battery life is doing. Dual LEDs let you know if it's on and if the battery is low. Some ''48v Phantom Power'' supplies don't quite give you the full voltage you need. The M48 always delivers 48 Volts of clean power. Use the included DC power supply or a 9V battery for maximum flexibility especially when working on location.…

Convert your digital audio signals (Toslink or coaxial) into a left/right stereo sound signal.Very practical if your audio amplifier has no or too few digital audio inputs.With improved 192 kHz sampling rate, for the best sound reproduction.Supports uncompressed, digital stereo signals.Supports 16 or 24 BIT, 8, 32, 44.1, 48, 96, 176.4 and 192 kHz sampling frequencies.With Wolfson DAC (digital-analog converter) for the best sound reproduction.Features:Audio input:1 x optical (Toslink), 1 x coaxial (RCA).Audio output:2 x R A (L/R).Sampling rate:192 kHz, 24 bit.Audio formats:2 CH PCM Stereo.Signal to noise ratio:>90 dB.Channel separation 90 dB.Frequency range:20 Hz ~ 20 kHz +/- 3 dB.Dimensions (…

Speaker switch box for connecting up to 2 pairs of speakers (4-8 Ω) in any combination to 1 stereo amplifier output.
Width (cm): 17.6
Inputs: Spring-load speaker terminal
Net Weight (kg): 0.43
Type: Speaker Switch Box;Desktop
Depth (cm): 10.0
Made in: Taiwan
Headphone Output: No
Outputs: Spring-load speaker terminal
USB: No
Controls: Switch
UK/EU Power supply included: No
Height (cm): 5.0
Power Supply: Passive