Climbing Gear

This rope is good for all, being effective for the leader and reassuring for the belayer. Gamme Active line Standard EN 892 Type Single rope Impact force 8.4 KN Number of falls 6 Extension during the first fall 37% Sheath percentage 40% Weight per metre 64 g Sharp edge strenght - Process Unicore | Thermo Fluid  

This rope is dedicated to expert climbers and experienced and vigilant belayers, because its easy running quality does not give the same assurance on belay as a rope of larger diameter. Gamme Active line Standard EN 892 Type Single rope Impact force 8.2 KN Number of falls 5 Extension during the first fall 36% Sheath percentage 36% Weight per meter 61 g Sharp edge strenght - Process Unicore | Thermo Fluid  

After having been the first thin rope on the market to meet the requirements for all three standards for dynamic ropes, JOKER will from now on benefit from the latest UNICORE technology. The JOKER, at one and the same time a single, double, and twin rope, is now UNICORE and will delight the most experienced climbers and alpinists seeking lightness, easy running and security, and at the same time the traditionalists looking for a multi-purpose rope for ridge climbs, or other classic, mixed or snow routes. Gamme Mountain line Standard EN 892 Type Single rope | Half rope | Twin rope Impact force (single rope with 80kg ) 8.2 KN Impact force (half rope with 55kg /1 strand) 6

After having been the first thin rope on the market to meet the requirements for all three standards for dynamic ropes, JOKER will from now on benefit from the latest UNICORE technology. The JOKER, at one and the same time a single, double, and twin rope, is now UNICORE and will delight the most experienced climbers and alpinists seeking lightness, easy running and security, and at the same time the traditionalists looking for a multi-purpose rope for ridge climbs, or other classic, mixed or snow routes. Gamme Mountain line Standard EN 892 Type Single rope | Half rope | Twin rope Impact force (single rope with 80kg ) 8.2 KN Impact force (half rope with 55kg /1 strand) 6

Weighing in at only 48 g per meter, the Opera 8.5 is the first sub 50g rope and is the lightest and thinnest single rope on the market. It is also rated as a double and twin rope. The rope is made with technology that combines all of Béal’s knowhow, resulting in low impact forces, UNICORE technology, DRY COVER protection and the UIAA Water Repellent standard for the GOLDEN DRY version. This ultra-supple, ultralight rope will please the most demanding sport climbers while remaining versatile for mountaineering. Gamme Mountain line Standard EN 892 Type Single rope | Half rope | Twin rope Impact force (single rope with 80kg ) 7.4 KN Impact force (half rope with 55kg

Weighing in at only 48 g per meter, the Opera 8.5 is the first sub 50g rope and is the lightest and thinnest single rope on the market. It is also rated as a double and twin rope. The rope is made with technology that combines all of Béal’s knowhow, resulting in low impact forces, UNICORE technology, DRY COVER protection and the UIAA Water Repellent standard for the GOLDEN DRY version. This ultra-supple, ultralight rope will please the most demanding sport climbers while remaining versatile for mountaineering. Gamme Mountain line Standard EN 892 Type Single rope | Half rope | Twin rope Impact force (single rope with 80kg ) 7.4 KN Impact force (half rope with 55kg

SPARK is characterised in particular by its design without anti-panic function, which enables fast, precise and uninterrupted abseiling. Intuitive and simple rope handling, while the carabiner on the harness can remain connected to the device, the well thought-out ergonomics and the precise operation of the lever allow for the best handling. Thanks to the sophisticated rope guide inside the device, the rope is protected against twisting and kinking aswell as heavy wear. Fast, precise, uninterrupted abseiling without anti-panic-function Outstanding handling thanks to compact, ergonomic design and intuitive rope guide Durable and robust: 100% metal without vulnerable plastic parts

Product Name Product Code Colour Strength Weight Range Certification Wallnut set 1-11, Alloy Offset set 7-11. NUTSET1 Assorted 7 - 12kN 624g 6.7 - 37.4mm EN 12270:2013 Wallnut set 1-11, Torque set 1-4. NUTSET2 Assorted 7 - 14kN 803g 6.7 - 71mm EN 12270:2013 Wallnut set 1-11, Alloy Offset set 7-11, Torque set 1-4 NUTSET3 Assorted 7 - 14kN 998g 6.7 - 71mm EN 12270:2013

The great classic for adventure climbing. Light and free-running for ease of use on long routes, on the crag and in the Alps. Technical and robust enough to sustain the most difficult loadings, it is even better today because it now benefits from all the advantages of the UNICORE technology. Gamme Mountain line Standard EN 892 Type Half rope Impact force 5.4 KN Number of falls 15 Extension during the first fall 35% Sheath percentage 39% Weight per metre 49 g Sharp edge strenght   Process THERMO FLUID | UNICORE Treatment DRY COVER | GOLDEN DRY  

Easy to put on and adjust to any body size thanks to the jacket system Two large aluminium D-rings as side eyelets according to EN 358 provide a work position and a stand-by position for fastening a lanyard Movable and hardened steel fall arrest eyelets in accordance with EN 361 in use with EN 353-1 Textile fall arrest eyelets (1 dorsal and 2 sternal) in accordance with EN 361 remain open under preload and allow a further carabiner to be easily attached Fall indicator in the back padding; a red label becomes visible in the window in the back plate following a load of over 6 kN All load-bearing straps are equipped with indicator tape; red fibres become visible in the event of damage

Easy to put on and adjust to any body size thanks to the jacket system Two large aluminium D-rings as side eyelets according to EN 358 provide a work position and a stand-by position for fastening a lanyard Movable and hardened steel fall arrest eyelets in accordance with EN 361 in use with EN 353-1 Textile fall arrest eyelets (1 dorsal and 2 sternal) in accordance with EN 361 remain open under preload and allow a further carabiner to be easily attached Fall indicator in the back padding; a red label becomes visible in the window in the back plate following a load of over 6 kN All load-bearing straps are equipped with indicator tape; red fibres become visible in the event of damage

Easy to put on and adjust to any body size thanks to the jacket system Two large aluminium D-rings as side eyelets according to EN 358 provide a work position and a stand-by position for fastening a lanyard Movable and hardened steel fall arrest eyelets in accordance with EN 361 in use with EN 353-1 Textile fall arrest eyelets (1 dorsal and 2 sternal) in accordance with EN 361 remain open under preload and allow a further carabiner to be easily attached Fall indicator in the back padding; a red label becomes visible in the window in the back plate following a load of over 6 kN All load-bearing straps are equipped with indicator tape; red fibres become visible in the event of damage

A harness designed for work at height: - The Hero Pro Harness Allows All Workers At Height To Work In Optimal Conditions. The X-Shaped Design Of Its Shoulder Straps Ensures Excellent Load Distribution. In Addition, The Semi-Rigid Thigh Loops And Waist Belt Provide Optimal Pressure Distribution Where The Body Is In Contact With The Harness, Without Compression Points. The Padded Shoulder Straps Are Held Apart To Minimise Neck Chafing. In Addition, The Breathable Honeycomb Foam Lining The Waistband, Thigh And Shoulder Straps Improves The Overall Comfort Of The Harness By Limiting Perspiration. For Added Safety, Its Rear Anchor Ring Is Made Of Steel. This Harness Was Also Designed To Be As Ergonomic …

A harness designed for work at height: - The Hero Pro Harness Allows All Workers At Height To Work In Optimal Conditions. The X-Shaped Design Of Its Shoulder Straps Ensures Excellent Load Distribution. In Addition, The Semi-Rigid Thigh Loops And Waist Belt Provide Optimal Pressure Distribution Where The Body Is In Contact With The Harness, Without Compression Points. The Padded Shoulder Straps Are Held Apart To Minimise Neck Chafing. In Addition, The Breathable Honeycomb Foam Lining The Waistband, Thigh And Shoulder Straps Improves The Overall Comfort Of The Harness By Limiting Perspiration. For Added Safety, Its Rear Anchor Ring Is Made Of Steel. This Harness Was Also Designed To Be As Ergonomic …

A harness designed for work at height: - The Hero Pro Harness Allows All Workers At Height To Work In Optimal Conditions. The X-Shaped Design Of Its Shoulder Straps Ensures Excellent Load Distribution. In Addition, The Semi-Rigid Thigh Loops And Waist Belt Provide Optimal Pressure Distribution Where The Body Is In Contact With The Harness, Without Compression Points. The Padded Shoulder Straps Are Held Apart To Minimise Neck Chafing. In Addition, The Breathable Honeycomb Foam Lining The Waistband, Thigh And Shoulder Straps Improves The Overall Comfort Of The Harness By Limiting Perspiration. For Added Safety, Its Rear Anchor Ring Is Made Of Steel. This Harness Was Also Designed To Be As Ergonomic …

CT101.3 is a Beam Slider from At Height Ltd. It is used as an anchor point for fall protection and for rope access. The device is for use by one person and two persons in the event of a rescue. Each device is individually serial numbered. Product Information Model CT101.3 Weight 1.5kg Height 220mm Width 495mm Standards EN795: 2012/B Standards CEN/TS 16415:2013 Working Load Limit 140kg I-Beam Dimensions 105-310mm

Description Gated ventral attachment point can be opened for optimal integration of equipment: - connection of PROGRESS lanyards directly on the attachment point without need for a connector - connection of TOP CROLL ventral rope clamp on the ventral point for greater efficiency on rope ascents - connection of the PODIUM seat on the attachment point allows direct connection to the descender, while guaranteeing mobility at the ventral attachment point Ultra-comfortable design: - semi-rigid, wide waistbelt and leg loops for excellent support; sculpted and lined with breathable foam padding for comfort during suspension - textile side attachment points with plastic insert ensure

Description Gated ventral attachment point can be opened for optimal integration of equipment: - connection of PROGRESS lanyards directly on the attachment point without need for a connector - connection of TOP CROLL ventral rope clamp on the ventral point for greater efficiency on rope ascents - connection of the PODIUM seat on the attachment point allows direct connection to the descender, while guaranteeing mobility at the ventral attachment point Ultra-comfortable design: - semi-rigid, wide waistbelt and leg loops for excellent support; sculpted and lined with breathable foam padding for comfort during suspension - textile side attachment points with plastic insert ensure

Description Technical: - asymmetrical front sections for technical mountaineering boots - toothed front points offer excellent penetration - stable support on any type of ice (cauliflower, hoarfrost), thanks to the lateral secondary points, also on the mono-point - precise, efficient placements, thanks to the configuration of the points ANTISNOW system limits snow buildup in any snow conditions Modular: - come with four modular front points, to adapt to different activities. Mono-point (short or long), for ice climbing and dry tooling, asymmetrical dual-point for pure ice, or dual point for snow couloirs and gullies length of front points can be modified with one screw: -

Description Thin, ultra-light and compact rope for intensive mountaineering: - for use in rock, mixed, snow or ice environments - multi-type for use as a single, half or twin rope Excellent water resistance: - UIAA Guide Dry treatment: complete water-repellent treatment, making the rope more resistant to water, dirt and abrasion - meets the requirements of the UIAA standard Water repellent test: water absorption of less than 2 % - the rope is especially suitable for intensive or everyday use in extreme conditions Convenient rope handling: - Middle Mark: indicates the middle of the rope to facilitate maneuvers - EverFlex treatment: special thermal treatment stabilizes the core