Other Hand Tools

Puller / Carbon Steel

Birzman's Clam Disc Alignment Tool is an ingenious bit of kit that allows you to perfectly align your disc brake calipers to your rotors every time. Made of stainless steel, you simply slide the Clam onto the rotor, spin the wheel so the clam aligns with the caliper, pull the brake lever and tighten the caliper bolts and there you have it; a perfectly aligned disc and caliper! 3 Clams are included to suit a range of caliper shapes.

The Birzman Internal Cable Routing Kit is a magnetic tool that aids internal cable routing by guiding cables through the frame. Magnetic tool that assists internal routing by guiding adapters through the frameBuilt-in awl helps restore cut housing ends for easier attachment with adapter and cable insertionContents include 4 x individual adapters, a lead wire and a flexible magnetic extensionCompatible with cables, housings/hoses and wiresFabric covered tip protects frame from scratchesThe Kit includes four individual steel adapters, a lead wire and flexible extension. Compatible with cables, housings / hoses and wires. Connect one end of the adapter to lead wire, the other end to a cable,

The O-Ring Pick set from Birzman is designed to make the removal and placement of these often-fiddly components a whole lot easier.Hooked and L-shaped endsN and spoon shaped endsMaterial: Hardened Steel / High polymerThis dual tool set features two implements with different shaped ends, capable of placing and lifting the most awkward of O-rings when you are repairing your bike chain. Each tool has one hooked end, with an L-shaped opposite end on one and an N-shaped end on the other. Precise tools for a tricky job, the O-Ring Pick set makes this part of chain maintenance as quick and hassle-free as can be.

The Birzman Threadless Saw Guide provides a guideline for the saw blade to ensure a precise cut on tubes. The tool is compatible with tubes ranging from 1 to 1¼"and features adjustable panels to accommodate both 1.2mm (steel) and 2mm (carbon) saw blades.Functions: Compatible with tubes from 1 to 1¼"; 1.2mm (steel) and 2mm (carbon) bladesMaterial: Alloy steel / High polymer

The Birzman Torque Driver is a handy tool, designed to provide adequate torque levels for safe and secure riding, without over-tightening and potentially damaging your expensive, lightweight components. Preset to an accurate torque setting, the Torque Driver takes the guesswork out of your adjustments, for quick, hassle-free tweaks and servicing. It comes equipped with 4 interchangeable heads that include 3/4/5 hex keys, a T25 torx key and a convenient holder to keep it all organised. A shaped handle allows you to get a good grip when tightening your components with the key emitting a noticeable 'click' when the max torque is achieved.

The Birzman Torque Driver is a handy tool, designed to provide adequate torque levels for safe and secure riding, without over-tightening and potentially damaging your expensive, lightweight components. Preset to an accurate torque setting, the Torque Driver takes the guesswork out of your adjustments, for quick, hassle-free tweaks and servicing. It comes equipped with 4 interchangeable heads that include 3/4/5 hex keys, a T25 torx key and a convenient holder to keep it all organised. A shaped handle allows you to get a good grip when tightening your components with the key emitting a noticeable 'click' when the max torque is achieved.

Front pockets with concealed zipped pockets underneath Front side cargo pockets with velcro flap closure Rear pockets with velcro closure Elasticated waist for comfort Knee pad pockets

Front pockets with concealed zipped pockets underneath Front side cargo pockets with velcro flap closure Rear pockets with velcro closure Elasticated waist for comfort Knee pad pockets

Front pockets with concealed zipped pockets underneath Front side cargo pockets with velcro flap closure Rear pockets with velcro closure Elasticated waist for comfort Knee pad pockets

Cone moulded design - EN149:2001 FFP2 approved - Assigned protection factor 20 - Box of 10

Steel toe cap Steel midsole Leather upper with padded collar Double density PU shock absorbent sole Fully moulded & removable insole Wide fitting for comfort Safety rating EN20345 SB-P SRC

Steel toe cap Steel midsole Leather upper Double density PU shock absorbent sole Fully moulded & removable insole Wide fitting for comfort Safety rating EN20345 SB-P

Steel toe cap Steel midsole Leather upper Double density PU shock absorbent sole Fully moulded & removable insole Wide fitting for comfort Safety rating EN20345 SB-P

Steel toe cap Steel midsole Leather upper Double density PU shock absorbent sole Fully moulded & removable insole Wide fitting for comfort Safety rating EN20345 SB-P

Steel toe cap Steel midsole Leather upper Double density PU shock absorbent sole Fully moulded & removable insole Wide fitting for comfort Safety rating EN20345 SB-P

Zip front fastening Conforms to EN471 Class 2

300D polyester PU coated fabric 170g polyester quilt lining Fleece collar Concealed hood Full length storm flap 2 lower pockets Internal pocket & mobile pocket Conforms to EN20471 Class 3

- Knitted polyester fabric - Velcro closure - 2 band & brace - Conforms to EN471 class 3

Polyester knitted fabric Velcro front fastening Black edge trim 2 band & brace Conforms to EN471 Class 3

300D polyester PU coated fabric Waterproof taped seams Elasticated waist Confirms to EN471 class 1

300D polyester PU coated fabric Waterproof taped seams Elasticated waist Confirms to EN471 class 1

300D polyester PU coated fabric 200g polyester quilt lining Concealed hood Elasticated storm cuffs Anti-wicking strips Conforms to EN471 class 3