Other Hand Tools

HG hand torque multipliers are the ideal tools for applications where air and electricity aren't easily accessible. The gearing design allows for a high torque output with minimal input. Commonly used in petrochemical, power generation, transportation, shipping and maintenance industries.Accuracy better than 5%. Note: H-10 & H-15 models are not fitted with Anti-Windup. All models are supplied with a Reaction Foot, except HG-80 model is supplied with a Reaction Ring. Model:HG-60 Drive Size:1 1/2" Sq. Dr. Range: - 11500 N.m, - 8480 lbf.ft, - 1173 kgf.m. Tool Weight:61.8 lbs. Tool Length:11.4 Torque Multiplication:23.2:1 Gear Ratio:28 Spline Diameter:91 mm D2 Size (mm):173

3 Jaws Reversible Gear Pulley 80-350 Non Sparking Cu-Be by EGA Master

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt. Accuracy .25% of full scale and Bi-directional. Model:RTSX400F-A Range: 54.2 - 542.4 N.m ,40 - 400 lbf.ft, 5.5 - 55.2 kgf.m. Input Drive:3/4 F/Sq Output Drive:3/4 M/Sq Tool Length:5.3 Tool Width:2.3 Tool Height:3

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt. Accuracy .25% of full scale and Bi-directional. Model:RTSX400F-A Range: 54.2 - 542.4 N.m ,40 - 400 lbf.ft, 5.5 - 55.2 kgf.m. Input Drive:3/4 F/Sq Output Drive:3/4 M/Sq Tool Length:5.3 Tool Width:2.3 Tool Height:3

Electronic torsion test device 0.5-15 Nm, 1/4"

The Mountz brushless rotary torque & angle sensors an ideal torque-measuring solution for applications where accuracy and reliability rank paramount. Can be used for testing real-time torque or for checking the breakaway torque (first movement) of a fastener. Accuracy .2% of full scale. Compact design & bi-directional. Model:BLRTSX160i-A Range: 180 - 1807 cN.m ,16 - 160 lbf.in, 18.4 - 184 kgf.cm. Input Drive:1/4 F/Sq Output Drive:1/4 M/Sq Tool Length:3 Tool Width:1.1 Tool Height:2

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt.

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt.

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt.

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt.

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt.

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt.

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt.

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt.

Torque Multiplier 6000 NM 1/2" - 1.1/2"

The position control torque arm system helps manufacturers detect and eliminate costly screw-fastening errors during the assembly process. This torque arm is designed to reduce the risk of improperly fastened screws, ensuring that every screw is in the correctly tightened in the correct sequence. A good tightening sequence ensures that an even preload distribution is achieved in the joint. Using a position control arm is like putting the eyes and ears of a quality control manager where they are needed most - right on the assembly area.

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt. Accuracy .25% of full scale and Bi-directional. Model:RTSX400F-A Range: 54.2 - 542.4 N.m ,40 - 400 lbf.ft, 5.5 - 55.2 kgf.m. Input Drive:3/4 F/Sq Output Drive:3/4 M/Sq Tool Length:5.3 Tool Width:2.3 Tool Height:3

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt. Accuracy .25% of full scale and Bi-directional. Model:RTSX400F-A Range: 54.2 - 542.4 N.m ,40 - 400 lbf.ft, 5.5 - 55.2 kgf.m. Input Drive:3/4 F/Sq Output Drive:3/4 M/Sq Tool Length:5.3 Tool Width:2.3 Tool Height:3

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt. Accuracy .25% of full scale and Bi-directional. Model:RTSX400F-A Range: 54.2 - 542.4 N.m ,40 - 400 lbf.ft, 5.5 - 55.2 kgf.m. Input Drive:3/4 F/Sq Output Drive:3/4 M/Sq Tool Length:5.3 Tool Width:2.3 Tool Height:3

17 Piece Nautical Set Non Sparking Al-Bron by EGA Master

The position control torque arm system helps manufacturers detect and eliminate costly screw-fastening errors during the assembly process. This torque arm is designed to reduce the risk of improperly fastened screws, ensuring that every screw is in the correctly tightened in the correct sequence. A good tightening sequence ensures that an even preload distribution is achieved in the joint. Using a position control arm is like putting the eyes and ears of a quality control manager where they are needed most - right on the assembly area.

Torque Multiplier 6000 NM 3/4" - 1.1/2"

The Sealey CC230V uses cutting edge HHO engine cleaning technology. Each unit uses electrolysis to split water molecules into the composite elements of oxygen and hydrogen to produce oxyhydrogen or HHO gas. Simple-to-use machine feeds HHO into the engine through the vehicle air inlet breaking down any carbon build-up on its way. Carbon builds up layer on layer when fuel combusts in the engine cylinders which can affect the smooth running of any engine. Removing carbon build-up from the engine can improve performance, raise mpg, reduce emissions and oil consumption. The CC230V runs on tap water with no expensive refills making the process a great revenue boost for any workshop. Fitted with