Staple Guns & Nailers Draper

Spare riveter jaws for Draper stock No.s 27846, 27847, 27845, 27844 and 27839 riveters.1 x Spare Jaws for 27846, 27847, 27845, 27844 and 27839 Riveters

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

• Suitable for rivet nuts in aluminium, steel and stainless steel • Ideal for when rear access is restricted/prevented • Steel riveter head and steel arms, with PVC moulded hand grips • Fitted with thumbwheel to unscrew the threaded nut rivet • Set includes seven rivet nut adaptors in sizes M3-M12This robust long-arm threaded nut riveter is suitable for rivet nuts in aluminum, steel and stainless steel. The long arms offer effortless functionality and allow access to hard-to-reach restricted areas. Steel riveter head and steel arms, with PVC moulded hand grips. Fitted with thumbwheel to unscrew the threaded nut rivet. The set includes seven rivet nut adaptors - M3, M4, M5, M6, M8, M10, and M…

2 Way Hand Riveter Kit General duty riveter with head that will operate at 90

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

Robust three-way staple gun/tacker. The durable all-steel body has a 2-tone painted finish and is attached with a PVC soft grip handle. Suitable for flat staples 4 - 14mm, 7.6mm staples 10 - 14mm and brad nails 10 - 14mm. Supplied with 500 x 1.2 x 8mm staples, 500 x 1.2 x 12mm cable staples and 500 x2 x 10mm brad nails.

Expert Quality, compound action riveter with spring action tubular steel handles and rubber soft grips. Supplied with nozzle wrench for use with the four interchangeable nozzles, which accept 2.4, 3.2, 4.0 and 4.8mm alloy and blind rivets. Carton packed.

Specialist tacker for wires and cables. A lightweight, quick, one - handed alternative to cable clips. Ideal for fastening low voltage cables such as speaker, telephone, antenna or computer cables. For use with round cables 4 - 6mm or 6 - 8mm and flat wire 2.5 - 4mm width < 8mm or 4.5 - 6.3mm width< 10.3mm.

Expert Quality, heavy duty roofing hammer tacker, ideal for fitting breather membranes and insulation. Robust enough to be used as a hammer enabling protruding staples or tacks to be pushed home. Chrome plated with ergonomic, strong yet comfortable non slip, handle grip. Quick release button loads two full strips of T50 staples. Fitted with a low staple indicator. Uses staples 6-14mm and ARROW T50 staples.

Expert Quality, concertina style heavy duty riveter, ideal for repetitive tasks using either aluminium, stainless steel or steel blind rivets. Concertina frame manufactured from tough carbon steel, with 4 interchangeable nozzles to fit 2.4, 3.2, 4.0 and 4.8mm rivets.

This two-in-one tacker and nailer is useful in a multitude of situations, whether you're wrapping a canvas print or need to put a picture on a wall. The ergonomic handle makes it comfortable to use whilst adjustable power control and a safety locking system make it a safe addition to your toolbox. Specifications Pressed steel body Ergonomic handle Safety lock system Adjustable power control Uses 6-14mm staples Uses 14mm 'I' nails Material: Steel Dimensions: H22 x W21 x D4.2cm Colour: Chrome / Blue / Black

Air stapler/nailer, with quality cast Aluminium housing. Attached with a nail holder and soft grip handle. Fitted with a safety bump mechanism that helps prevent accidental firing. Suitable for nails 10 - 50mm and staples 12 - 40mm long. Supplied complete with carrying case.

Fasten upholstery, insulation, wiring and more with this heavy duty staple gun The Draper 63638 is an expert quality, heavy-duty staple gun that is ideal for fastening material, insulation, wiring and more. It has adjustable power control with an all-steel construction and soft-grip handle. It accepts 6-14mm staples and is supplied with 144 x 8mm and 144 x 12mm staples. Features:
- Heavy-duty staple gun with adjustable power control and slip-on stitch anvil
- All steel construction with a nickel plating and soft-grip handle
- Uses 6 to 14mm staples Comes with: 
- 144 x 8mm and 144 x 12mm staples
- Staple remover Specification:
- Accepts: 6-14mm staples…

For use with rivets listed under Blind Rivets. Used on back of blind rivets for extra fixing security. Average contents 100 washers per card. Display packed.

• Grip range of 2.5-4mm • Thread size M10 x 1.5mm • Made from durable carbon steel • Zinc plated threaded insertsPack of 50 zinc plated threaded inserts. Grip range of 2.5-4mm. Thread size M10 x 1.5mm. Made from durable carbon steel.1 x Zinc Plated Threaded Insert Rivet Nuts, M10 x 1.5mm (Pack of 50) Technical SpecificationGrip range: 2.5-4mm Pack quantity: 50 Thread size: M10 x 1.5mm Type: ThreadedTechnical Specification:Pack Quantity: 50 Thread Size: M10 x 1.5mm Product Type: ThreadingDimensions: Length: 100mm x Height: 112mmWeight: 0.314KgWarranty: Consumable Warranty

Ideal for upholstery and furnishing applications and also suitable for repairing fence panels or installing hardboard. The Draper D20 20V Nailer Stapler is a powerful and efficient nailer with a firing rate of 60 nails per minute and can be used for single or contact firing. This nailer takes Type 90 staples between 19mm and 40mm, and 18-gauge nails between 20 and 50mm in length. Quick and easy to load, it has a magazine capacity of 100. This practical and lightweight nailer features a safety contact tip. Specifications Part of the D20 series Single or contact firing Safety contact tip Batteries and Chargers are available separately Battery: D20 20V Li-ion Firing Rate: 60 per min Nail Gauge: …

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

• Grip range of 0.5-3mm • Thread size M6 x 1.0mm • Made from durable carbon steel • Zinc plated threaded insertsPack of 50 zinc plated threaded inserts. Grip range of 0.5-3mm. Thread size M6 x 1.0mm. Made from durable carbon steel.1 x Zinc Plated Threaded Insert Rivet Nuts, M6 x 1.0mm (Pack of 50) Technical SpecificationGrip range: 0.5-3.0mm Pack quantity: 50 Thread size: M6 x 1.0mm Type: ThreadedTechnical Specification:Pack Quantity: 50 Thread Size: M6 x 1.0mm Product Type: ThreadingDimensions: Length: 100mm x Height: 70mmWeight: 0.18KgWarranty: Consumable Warranty

Aluminium rivets with steel mandrel. 3.2mm rivets in tubs of approx. 2000, 4.0mm rivets in tubs of approx. 1200, 4.8mm rivets in tubs of approx. 800.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

• Grip range 0.5-2mm • Thread size M4 x 0.7mm • Made from durable carbon steel • Zinc plated threaded insertsPack of 50 zinc plated threaded inserts. Grip range of 0.5-2mm. Thread size M4 x 0.7mm. Made from durable carbon steel.1 x Zinc Plated Threaded Insert Rivet Nuts, M12 x 1.75 (Pack of 50) Technical SpecificationGrip range: 0.5-2mm Pack quantity: 50 Thread size: M4 x 0.7mm Type: ThreadedTechnical Specification:Pack Quantity: 50 Thread Size: M4 x 0.7mm Product Type: ThreadingDimensions: Length: 100mm x Height: 70mmWeight: 0.048KgWarranty: Consumable Warranty

Aluminium rivets with steel mandrel. 3.2mm rivets in tubs of approx. 2000, 4.0mm rivets in tubs of approx. 1200, 4.8mm rivets in tubs of approx. 800.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

• Suitable for aluminium, steel, stainless steel and blind and structural rivets up to 6.4mm • Chrome molybdenum hardened jaws • Steel riveter head and steel arms, with PVC moulded hand grips • Plastic collection bowl, with spare nozzle storage in the base • Set includes five nozzles in sizes 2.4-6.4mmThis robust medium-arm riveter is suitable for aluminium, steel, stainless steel, and blind and structural rivets up to 6.4mm. The chrome molybdenum hardened jaws offer extra leverage. Steel riveter head and steel arms, with PVC moulded hand grips. There is a plastic collection bowl, with storage for spare nozzles in the base. The set includes five nozzles - 2.4, 3.2, 4.0, 4.8 and 6.4mm. Length 38…