Staple Guns & Nailers Draper

DIY users riveter with cast aluminium body and carbon steel moving handle with moulded grips. Supplied with nozzle wrench for use with the four interchangeable nozzles, which accept 2.4, 3.2, 4.0 and 4.8mm alloy and blind rivets plus an assortment of approximately 100 rivets. Display packed.

This dual purpose staple gun and tacker and perfect for tackling everything from the smallest DIY project, to a professional job. The pressed steel body is of a high quality and features a soft grip handle which makes prolonged use comfortable and easy. Specifications Pressed steel body 2-Tone painted finish PVC soft-grip handle Suitable for flat-crown staples: 4-14mm leg / 11.3mm crown / 0.7mm thickness Dimensions: H20.2 x W19.6 x D4.4cm Colour: Chrome / Blue /Black

Ideal for upholstery and furnishing applications and also suitable for repairing fence panels or installing hardboard. The Draper D20 20V Nailer Stapler is a powerful and efficient nailer with a firing rate of 60 nails per minute and can be used for single or contact firing. This nailer takes Type 90 staples between 19mm and 40mm, and 18-gauge nails between 20 and 50mm in length. Quick and easy to load, it has a magazine capacity of 100. This practical and lightweight nailer features a safety contact tip and is supplied with a 2Ah battery and charger. Specifications Part of the D20 series Single or contact firing Safety contact tip Supplied with 2Ah battery and charger Battery: D20 20V Li-ion …

Impact strength adjustment dial, contact safety trigger. fires up to 20 per minute. Supplied with 400 x 14mm staples and 100 x 15mm brad nails.

Suitable for fastening low voltage wires, i.e. television/radio aerial cables and telephone leads. Use 10 and 14mm cable/wiring staples when tacking low voltage wiring cables. Can also be used as a traditional stapler with flat staples 8-12mm.

10 - 50mm air nailer, with quality cast Aluminium housing. Attached with a nail holder and soft grip handle. Fitted with a safety bump mechanism that helps prevent accidental firing. Suitable for nails 10 - 50mm long. Supplied complete with carrying case.

Suitable for a wide range of DIY applications including upholstery. Uses 4, 6 and 8mm long light duty staples and is Supplied with 200 x 8mm staples. Display packed.

For use with rivets listed under Blind Rivets. Used on back of blind rivets for extra fixing security. Average contents 100 washers per card. Display packed.

• Grip range of 0.5-3.5mm • Thread size M8 x 1.25mm • Made from durable carbon steel • Zinc plated threaded insertsPack of 50 zinc plated threaded inserts. Grip range of 0.5-3.5mm. Thread size M8 x 1.25mm. Made from durable carbon steel.1 x Zinc Plated Threaded Insert Rivet Nuts, M8 x 1.25mm (Pack of 50) Technical SpecificationGrip range: 0.5-3.5mm Pack quantity: 50 Thread size: M8 x 1.25mm Type: ThreadedTechnical Specification:Pack Quantity: 50 Thread Size: M8 x 1.25mm Product Type: ThreadingDimensions: Length: 100mm x Height: 112mmWeight: 0.28KgWarranty: Consumable Warranty

For the removal of large heavy gauge staples. Large metal anvil with ergonomic plastic handle. Display packed.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

• Grip range of 0.5-2.5mm • Thread size M5 x 0.8mm • Made from durable carbon steel • Zinc plated threaded insertsPack of 50 zinc plated threaded inserts. Grip range of 0.5-2.5mm. Thread size M5 x 0.8mm. Made from durable carbon steel.1 x Zinc Plated Threaded Insert Rivet Nuts, M5 x 0.8mm (Pack of 50) Technical SpecificationGrip range: 0.5-2.5mm Pack quantity: 50 Thread size: M5 x 0.8mm Type: ThreadedTechnical Specification:Pack Quantity: 50 Thread Size: M5 x 0.8mm Product Type: ThreadingDimensions: Length: 100mm x Height: 70mmWeight: 0.094KgWarranty: Consumable Warranty

Aluminium rivets with steel mandrel. 3.2mm rivets in tubs of approx. 2000, 4.0mm rivets in tubs of approx. 1200, 4.8mm rivets in tubs of approx. 800.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

• Suitable for rivet nuts in aluminium, steel and stainless steel • Ideal for when rear access is restricted/prevented • Steel riveter head and steel arms, with PVC moulded hand grips • Fitted with thumbwheel to unscrew the threaded nut rivet • Set includes five rivet nut adaptors in sizes M3-M8This robust short-arm threaded nut riveter is suitable for rivet nuts in aluminum, steel and stainless steel. The short arms offer effortless functionality and allow access to hard-to-reach restricted areas. Steel riveter head and steel arms, with PVC moulded hand grips. Fitted with thumbwheel to unscrew the threaded nut rivet. The set includes five rivet nut adaptors - M3, M4, M5, M6 and M8. Length 29…

Spare riveter jaws for Draper stock No.s 27846, 27847, 27845, 27844 and 27839 riveters.1 x Spare Jaws for 27846, 27847, 27845, 27844 and 27839 Riveters

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

• Suitable for rivet nuts in aluminium, steel and stainless steel • Ideal for when rear access is restricted/prevented • Steel riveter head and steel arms, with PVC moulded hand grips • Fitted with thumbwheel to unscrew the threaded nut rivet • Set includes seven rivet nut adaptors in sizes M3-M12This robust long-arm threaded nut riveter is suitable for rivet nuts in aluminum, steel and stainless steel. The long arms offer effortless functionality and allow access to hard-to-reach restricted areas. Steel riveter head and steel arms, with PVC moulded hand grips. Fitted with thumbwheel to unscrew the threaded nut rivet. The set includes seven rivet nut adaptors - M3, M4, M5, M6, M8, M10, and M…

2 Way Hand Riveter Kit General duty riveter with head that will operate at 90

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

Robust three-way staple gun/tacker. The durable all-steel body has a 2-tone painted finish and is attached with a PVC soft grip handle. Suitable for flat staples 4 - 14mm, 7.6mm staples 10 - 14mm and brad nails 10 - 14mm. Supplied with 500 x 1.2 x 8mm staples, 500 x 1.2 x 12mm cable staples and 500 x2 x 10mm brad nails.