Staple Guns & Nailers Draper

Ideal for upholstery and furnishing applications and also suitable for repairing fence panels or installing hardboard. The Draper D20 20V Nailer Stapler is a powerful and efficient nailer with a firing rate of 60 nails per minute and can be used for single or contact firing. This nailer takes Type 90 staples between 19mm and 40mm, and 18-gauge nails between 20 and 50mm in length. Quick and easy to load, it has a magazine capacity of 100. This practical and lightweight nailer features a safety contact tip. Specifications Part of the D20 series Single or contact firing Safety contact tip Batteries and Chargers are available separately Battery: D20 20V Li-ion Firing Rate: 60 per min Nail Gauge: …

For use with rivets listed under Blind Rivets. Used on back of blind rivets for extra fixing security. Average contents 100 washers per card. Display packed.

• Grip range of 0.5-2.5mm • Thread size M5 x 0.8mm • Made from durable carbon steel • Zinc plated threaded insertsPack of 50 zinc plated threaded inserts. Grip range of 0.5-2.5mm. Thread size M5 x 0.8mm. Made from durable carbon steel.1 x Zinc Plated Threaded Insert Rivet Nuts, M5 x 0.8mm (Pack of 50) Technical SpecificationGrip range: 0.5-2.5mm Pack quantity: 50 Thread size: M5 x 0.8mm Type: ThreadedTechnical Specification:Pack Quantity: 50 Thread Size: M5 x 0.8mm Product Type: ThreadingDimensions: Length: 100mm x Height: 70mmWeight: 0.094KgWarranty: Consumable Warranty

Aluminium rivets with steel mandrel. 3.2mm rivets in tubs of approx. 2000, 4.0mm rivets in tubs of approx. 1200, 4.8mm rivets in tubs of approx. 800.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

• Suitable for rivet nuts in aluminium, steel and stainless steel • Ideal for when rear access is restricted/prevented • Steel riveter head and steel arms, with PVC moulded hand grips • Fitted with thumbwheel to unscrew the threaded nut rivet • Set includes five rivet nut adaptors in sizes M3-M8This robust short-arm threaded nut riveter is suitable for rivet nuts in aluminum, steel and stainless steel. The short arms offer effortless functionality and allow access to hard-to-reach restricted areas. Steel riveter head and steel arms, with PVC moulded hand grips. Fitted with thumbwheel to unscrew the threaded nut rivet. The set includes five rivet nut adaptors - M3, M4, M5, M6 and M8. Length 29…

Aluminium rivets with steel mandrel. 3.2mm rivets in tubs of approx. 2000, 4.0mm rivets in tubs of approx. 1200, 4.8mm rivets in tubs of approx. 800.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

• Suitable for rivet nuts in aluminium, steel and stainless steel • Ideal for when rear access is restricted/prevented • Steel riveter head and steel arms, with PVC moulded hand grips • Fitted with thumbwheel to unscrew the threaded nut rivet • Set includes seven rivet nut adaptors in sizes M3-M12This robust long-arm threaded nut riveter is suitable for rivet nuts in aluminum, steel and stainless steel. The long arms offer effortless functionality and allow access to hard-to-reach restricted areas. Steel riveter head and steel arms, with PVC moulded hand grips. Fitted with thumbwheel to unscrew the threaded nut rivet. The set includes seven rivet nut adaptors - M3, M4, M5, M6, M8, M10, and M…

Aluminium head and body. Supplied with four nozzles to accept 2.4 3.2, 4.0 and 4.8mm Aluminium rivets. Display packed.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

Robust three-way staple gun/tacker. The durable all-steel body has a 2-tone painted finish and is attached with a PVC soft grip handle. Suitable for flat staples 4 - 14mm, 7.6mm staples 10 - 14mm and brad nails 10 - 14mm. Supplied with 500 x 1.2 x 8mm staples, 500 x 1.2 x 12mm cable staples and 500 x2 x 10mm brad nails.

DIY users riveter with blue enamelled pressed steel frame, chrome molybdenum steel jaws and moulded grip handles. Supplied with four nozzles to accept 2.4, 3.2, 4.0 and 4.8mm aluminium alloy blind rivets, plus an assortment of approximately 60 rivets. Display packed.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

Expert Quality, heavy duty roofing hammer tacker, ideal for fitting breather membranes and insulation. Robust enough to be used as a hammer enabling protruding staples or tacks to be pushed home. Chrome plated with ergonomic, strong yet comfortable non slip, handle grip. Quick release button loads two full strips of T50 staples. Fitted with a low staple indicator. Uses staples 6-14mm and ARROW T50 staples.

Expert Quality, compound action riveter with spring action tubular steel handles and rubber soft grips. Supplied with nozzle wrench for use with the four interchangeable nozzles, which accept 2.4, 3.2, 4.0 and 4.8mm alloy and blind rivets. Carton packed.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

Compact yet robust dual-purpose tacker, which coverts to staple gun. The pressed steel body has a 2-tone painted finish and is attached with a PVC soft grip handle. Suitable for flat crown staples: 4-14mm leg, 11.3mm crown, 0.7mm thickness. Display packed.

Expert Quality, carbon steel riveter. Supplied with nozzle wrench for use with the three interchangeable nozzles, which accepts 3.2, 4.0 and 4.8mm alloy, steel and stainless steel rivets. Steel handle clip acts as nozzle change wrench. Display packed.

Specialist tacker for wires and cables. A lightweight, quick, one - handed alternative to cable clips. Ideal for fastening low voltage cables such as speaker, telephone, antenna or computer cables. For use with round cables 4 - 6mm or 6 - 8mm and flat wire 2.5 - 4mm width < 8mm or 4.5 - 6.3mm width< 10.3mm.

Suitable for fastening low voltage wires, i.e. television/radio aerial cables and telephone leads. Use 10 and 14mm cable/wiring staples when tacking low voltage wiring cables. Can also be used as a traditional stapler with flat staples 8-12mm.

• Grip range of 2.5-4mm • Thread size M10 x 1.5mm • Made from durable carbon steel • Zinc plated threaded insertsPack of 50 zinc plated threaded inserts. Grip range of 2.5-4mm. Thread size M10 x 1.5mm. Made from durable carbon steel.1 x Zinc Plated Threaded Insert Rivet Nuts, M10 x 1.5mm (Pack of 50) Technical SpecificationGrip range: 2.5-4mm Pack quantity: 50 Thread size: M10 x 1.5mm Type: ThreadedTechnical Specification:Pack Quantity: 50 Thread Size: M10 x 1.5mm Product Type: ThreadingDimensions: Length: 100mm x Height: 112mmWeight: 0.314KgWarranty: Consumable Warranty

Impact strength adjustment dial, contact safety trigger. fires up to 20 per minute. Supplied with 400 x 14mm staples and 100 x 15mm brad nails.

Suitable for a wide range of DIY applications including upholstery. Uses 4, 6 and 8mm long light duty staples and is Supplied with 200 x 8mm staples. Display packed.