Staple Guns & Nailers Draper

DIY users riveter with blue enamelled pressed steel frame, chrome molybdenum steel jaws and moulded grip handles. Supplied with four nozzles to accept 2.4, 3.2, 4.0 and 4.8mm aluminium alloy blind rivets, plus an assortment of approximately 60 rivets. Display packed.

Expert Quality, heavy duty roofing hammer tacker, ideal for fitting breather membranes and insulation. Robust enough to be used as a hammer enabling protruding staples or tacks to be pushed home. Chrome plated with ergonomic, strong yet comfortable non slip, handle grip. Quick release button loads two full strips of T50 staples. Fitted with a low staple indicator. Uses staples 6-14mm and ARROW T50 staples.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

Expert Quality, compound action riveter with spring action tubular steel handles and rubber soft grips. Supplied with nozzle wrench for use with the four interchangeable nozzles, which accept 2.4, 3.2, 4.0 and 4.8mm alloy and blind rivets. Carton packed.

Compact yet robust dual-purpose tacker, which coverts to staple gun. The pressed steel body has a 2-tone painted finish and is attached with a PVC soft grip handle. Suitable for flat crown staples: 4-14mm leg, 11.3mm crown, 0.7mm thickness. Display packed.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

Expert Quality, carbon steel riveter. Supplied with nozzle wrench for use with the three interchangeable nozzles, which accepts 3.2, 4.0 and 4.8mm alloy, steel and stainless steel rivets. Steel handle clip acts as nozzle change wrench. Display packed.

Suitable for fastening low voltage wires, i.e. television/radio aerial cables and telephone leads. Use 10 and 14mm cable/wiring staples when tacking low voltage wiring cables. Can also be used as a traditional stapler with flat staples 8-12mm.

Specialist tacker for wires and cables. A lightweight, quick, one - handed alternative to cable clips. Ideal for fastening low voltage cables such as speaker, telephone, antenna or computer cables. For use with round cables 4 - 6mm or 6 - 8mm and flat wire 2.5 - 4mm width < 8mm or 4.5 - 6.3mm width< 10.3mm.

Impact strength adjustment dial, contact safety trigger. fires up to 20 per minute. Supplied with 400 x 14mm staples and 100 x 15mm brad nails.

• Grip range of 2.5-4mm • Thread size M10 x 1.5mm • Made from durable carbon steel • Zinc plated threaded insertsPack of 50 zinc plated threaded inserts. Grip range of 2.5-4mm. Thread size M10 x 1.5mm. Made from durable carbon steel.1 x Zinc Plated Threaded Insert Rivet Nuts, M10 x 1.5mm (Pack of 50) Technical SpecificationGrip range: 2.5-4mm Pack quantity: 50 Thread size: M10 x 1.5mm Type: ThreadedTechnical Specification:Pack Quantity: 50 Thread Size: M10 x 1.5mm Product Type: ThreadingDimensions: Length: 100mm x Height: 112mmWeight: 0.314KgWarranty: Consumable Warranty

Suitable for a wide range of DIY applications including upholstery. Uses 4, 6 and 8mm long light duty staples and is Supplied with 200 x 8mm staples. Display packed.

10 - 50mm air nailer, with quality cast Aluminium housing. Attached with a nail holder and soft grip handle. Fitted with a safety bump mechanism that helps prevent accidental firing. Suitable for nails 10 - 50mm long. Supplied complete with carrying case.

• Grip range of 0.5-3mm • Thread size M6 x 1.0mm • Made from durable carbon steel • Zinc plated threaded insertsPack of 50 zinc plated threaded inserts. Grip range of 0.5-3mm. Thread size M6 x 1.0mm. Made from durable carbon steel.1 x Zinc Plated Threaded Insert Rivet Nuts, M6 x 1.0mm (Pack of 50) Technical SpecificationGrip range: 0.5-3.0mm Pack quantity: 50 Thread size: M6 x 1.0mm Type: ThreadedTechnical Specification:Pack Quantity: 50 Thread Size: M6 x 1.0mm Product Type: ThreadingDimensions: Length: 100mm x Height: 70mmWeight: 0.18KgWarranty: Consumable Warranty

For the removal of large heavy gauge staples. Large metal anvil with ergonomic plastic handle. Display packed.

For use with rivets listed under Blind Rivets. Used on back of blind rivets for extra fixing security. Average contents 100 washers per card. Display packed.

• Grip range 0.5-2mm • Thread size M4 x 0.7mm • Made from durable carbon steel • Zinc plated threaded insertsPack of 50 zinc plated threaded inserts. Grip range of 0.5-2mm. Thread size M4 x 0.7mm. Made from durable carbon steel.1 x Zinc Plated Threaded Insert Rivet Nuts, M12 x 1.75 (Pack of 50) Technical SpecificationGrip range: 0.5-2mm Pack quantity: 50 Thread size: M4 x 0.7mm Type: ThreadedTechnical Specification:Pack Quantity: 50 Thread Size: M4 x 0.7mm Product Type: ThreadingDimensions: Length: 100mm x Height: 70mmWeight: 0.048KgWarranty: Consumable Warranty

Aluminium rivets with steel mandrel. 3.2mm rivets in tubs of approx. 2000, 4.0mm rivets in tubs of approx. 1200, 4.8mm rivets in tubs of approx. 800.

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

• Suitable for aluminium, steel, stainless steel and blind and structural rivets up to 6.4mm • Chrome molybdenum hardened jaws • Steel riveter head and steel arms, with PVC moulded hand grips • Plastic collection bowl, with spare nozzle storage in the base • Set includes five nozzles in sizes 2.4-6.4mmThis robust medium-arm riveter is suitable for aluminium, steel, stainless steel, and blind and structural rivets up to 6.4mm. The chrome molybdenum hardened jaws offer extra leverage. Steel riveter head and steel arms, with PVC moulded hand grips. There is a plastic collection bowl, with storage for spare nozzles in the base. The set includes five nozzles - 2.4, 3.2, 4.0, 4.8 and 6.4mm. Length 38…

Spare riveter jaws for Draper stock No.s 27846, 27847, 27845, 27844 and 27839 riveters.1 x Spare Jaws for 27846, 27847, 27845, 27844 and 27839 Riveters

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Display packed.

Features: Impact strength adjustment dial, Contact safety trigger, Fires up to 20 per minute, Supplied with 300 x 19mm staples and 100 x 25mm brad nails

General duty riveter with head that will operate at 90° or 180°. Chrome molybdenum jaws with four nozzles to accept 2.4, 3.2, 4.0 and 4.8mm aluminium alloy blind rivets. Supplied with approximately 60 assorted rivets, nozzle wrench and plastic carrying case. Display packed.