Staple Guns & Nailers Draper

Aluminium rivets with steel mandrel. Average contents 50 rivets per card. Contents: 1 x Blind Rivets, 3.2 x 15.8mm (50 Piece)

Ideal for carpet underlay, roofing felt, breather membrane and foil insulation. Fitted with a power spring and handle grip. Uses Draper 6mm, 8 and 10mm long staples.

Pack of 50 zinc plated threaded inserts. Grip range of 2.5-4mm. Thread size M10 x 1.5mm. Made from durable carbon steel. Contents: 1 x Zinc Plated Threaded Insert Rivet Nuts, M10 x 1.5mm (Pack of 50) Specifications: Grip range: 2.5-4mm Thread size: M10 x 1.5mm Type: Threaded Pack quantity: 50

Pack of 50 zinc plated threaded inserts. Grip range of 0.5-3.5mm. Thread size M8 x 1.25mm. Made from durable carbon steel. Contents: 1 x Zinc Plated Threaded Insert Rivet Nuts, M8 x 1.25mm (Pack of 50) Specifications: Grip range: 0.5-3.5mm Thread size: M8 x 1.25mm Type: Threaded Pack quantity: 50

Pack of 50 zinc plated threaded inserts. Grip range of 0.5-3mm. Thread size M6 x 1.0mm. Made from durable carbon steel. Contents: 1 x Zinc Plated Threaded Insert Rivet Nuts, M6 x 1.0mm (Pack of 50) Specifications: Grip range: 0.5-3.0mm Thread size: M6 x 1.0mm Type: Threaded Pack quantity: 50

Pack of 50 zinc plated threaded inserts. Grip range of 0.5-2.5mm. Thread size M5 x 0.8mm. Made from durable carbon steel. Contents: 1 x Zinc Plated Threaded Insert Rivet Nuts, M5 x 0.8mm (Pack of 50) Specifications: Grip range: 0.5-2.5mm Thread size: M5 x 0.8mm Type: Threaded Pack quantity: 50

Pack of 50 zinc plated threaded inserts. Grip range of 0.5-2mm. Thread size M4 x 0.7mm. Made from durable carbon steel. Contents: 1 x Zinc Plated Threaded Insert Rivet Nuts, M12 x 1.75 (Pack of 50) Specifications: Grip range: 0.5-2mm Thread size: M4 x 0.7mm Type: Threaded Pack quantity: 50

Specialist tacker for wires and cables. A lightweight, quick, one-handed alternative to cable clips. Ideal for fastening low voltage cables such as speaker, telephone, antenna or computer cables. For use with round cables 4-6mm or 6-8mm and flat wire 2.5 - 4mm width < 8mm or 4.5 - 6.3mm width < 10.3mm. Contents: 1 x All-In-One Wiring/Cable Tacker

Suitable for a wide range of DIY applications including upholstery. Uses 4, 6 and 8mm long light duty staples and is Supplied with 200 x 8mm staples. Contents: 1 x Lightweight Stapler/Tacker

Impact strength adjustment dial, contact safety trigger. Fires up to 20 per minute. Supplied with 400 x 14mm staples and 100 x 15mm brad nails. Contents: 1 x Draper Storm Force® Nailer/Stapler, 16mm Specifications: Nail Range: 14 - 16mm Power Supply: 240V Staple Range: 6 – 14mm Weight: 1.38kg

Storm Force heavy-duty stapler is fitted with a contact safety mechanism which prevents accidental firing. Also consists of a variable strength impact adjustment dial and an anti-jam mechanism. The ergonomic soft grip handle makes it easy to use through prolonged periods by preventing user fatigue. The simplified magazine allows the staples and nails to be inserted very easily. Supplied with 300 x 19mm staples and 100 x 25mm brad nails. Specification Voltage: 230V - 50Hz Staple capacity: 15 - 25mm Nail capacity: 15 - 32mm Weight: 1.58kg

Robust three-way staple gun/tacker. The durable all steel body has a 2 - tone painted finish and is attached with a PVC soft grip handle. Suitable for flat staples 4 - 14mm, 7.6mm staples 10 - 14mm and brad nails 10 - 14mm. Supplied with 500 x 1.2 x 8mm staples, 500 x 1.2 x 12mm cable staples and 500 x2 x 10mm brad nails. Contents: 1 x Staple Gun/Tacker Kit

This two-in-one tacker and nailer is useful in a multitude of situations, whether you're wrapping a canvas print or need to put a picture on a wall. The ergonomic handle makes it comfortable to use whilst adjustable power control and a safety locking system make it a safe addition to your toolbox. Specifications Pressed steel body Ergonomic handle Safety lock system Adjustable power control Uses 6-14mm staples Uses 14mm 'I' nails Material: Steel Dimensions: H22 x W21 x D4.2cm Colour: Chrome / Blue / Black

Suitable for fastening low voltage wires, i.e. television/radio aerial cables and telephone leads. Use 10 and 14mm cable/wiring staples when tacking low voltage wiring cables. Can also be used as a traditional stapler with flat staples 8 - 12mm. Contents: 1 x Wiring Cable/Tacker for Low Voltage Wires Only

For the removal of large heavy gauge staples. Large metal anvil with ergonomic plastic handle. Contents: 1 x Heavy Duty Staple Remover

This robust short-arm threaded nut riveter is suitable for rivet nuts in aluminum, steel and stainless steel. The short arms offer effortless functionality and allow access to hard-to-reach restricted areas. Steel riveter head and steel arms, with PVC moulded hand grips. Fitted with thumbwheel to unscrew the threaded nut rivet. The set includes five rivet nut adaptors - M3, M4, M5, M6 and M8. Length 290mm. Contents: 5 x Rivet nut adaptors - M3, M4, M5, M6, M8 1 x Spanner Specifications: Length: 290mm Weight: 600g

10 - 50mm air nailer, with quality cast aluminium housing. Attached with a nail holder and soft grip handle. Fitted with a safety bump mechanism that helps prevent accidental firing. Suitable for nails 10 - 50mm long. Supplied complete with carrying case. Contents: 1 x Draper Air Nailer, 10 - 50mm Specifications: Air Inlet: 1/4" BSP Average Air Consumption: 0.26cfm (0.75L/min) Min Hose Size: 3/8" (10mm) Nail Size: 10-50mm, Head 2mm, Gauge 18 Operating Air Pressure: 75 - 100psi Shank Size: Width 1.25mm, Thickness 1.05mm Staple Size: N/A Weight: 1.4kg

Air stapler/nailer, with quality cast aluminium housing. Attached with a nail holder and soft grip handle. Fitted with a safety bump mechanism that helps prevent accidental firing. Suitable for nails 10 - 50mm and staples 12 - 40mm long. Supplied complete with carrying case. Contents: 1 x Draper Air Stapler/Nailer Specifications: Air Inlet: 1/4" BSP Average Air Consumption: 0.28cfm (0.8L/min) Min Hose Size: 3/8" (10mm) Nail Size: 10-50mm, Head 2mm, Gauge 18 Operating Air Pressure: 75 - 100psi Shank Size: Width 1.25mm, Thickness 1.05mm Staple Size: 12-40mm, Crown 5.7mm, Gauge 18 Vibration Level: 2.8m/s2 Weight: 1.45kg

Expert Quality, heavy duty roofing hammer tacker, ideal for fitting breather membranes and insulation. Robust enough to be used as a hammer enabling protruding staples or tacks to be pushed home. Chrome plated with ergonomic, strong yet comfortable non slip, handle grip. Quick release button loads two full strips of T50 staples. Fitted with a low staple indicator. Uses staples 6 - 14mm and ARROW T50 staples. Contents: 1 x Roofing Hammer Tacker

Draper Staple Gun/Tacker with 100 Staples This easy-to-use tacker features a removable anvil for using as a staple gun - great for everyday DIY and crafts. It comes complete with 100 12mm staples to help you get started. Removable anvil Includes 100 x 12mm staples Compatible with 6‒8mm x 12mm wide staples

DIY users riveter with blue enamelled pressed steel frame, chrome molybdenum steel jaws and moulded grip handles. Supplied with four nozzles to accept 2.4, 3.2, 4.0 and 4.8mm aluminium alloy blind rivets, plus an assortment of approximately 60 rivets. Contents: 1 x Hand Riveter Kit for Aluminium Rivets

DIY users riveter with cast aluminium body and carbon steel moving handle with moulded grips. Supplied with nozzle wrench for use with the four interchangeable nozzles, which accept 2.4, 3.2, 4.0 and 4.8mm alloy and blind rivets plus an assortment of approximately 100 rivets. Supplied in case. Contents: 1 x Hand Riveter Kit for Aluminium Rivets, 1 x Case

Spare riveter jaws for Draper stock No.s 27846, 27847, 27845, 27844 and 27839 riveters. Contents: 1 x Spare Jaws for 27846, 27847, 27845, 27844 and 27839 Riveters

For use with rivets listed under Blind Rivets. Used on back of blind rivets for extra fixing security. Average contents 100 washers per card. Contents: 1 x Rivet Backing Washers, 4.8mm (100 Piece)