Power Tool Accessories Dremel

Milling Accessory

This router bit set contains all 7 of Dremel's high-quality routing accessories for performing a diverse range of routing applications The Dremel 26150660JA 260 router bit set contains a variety of Dremel's most popular routing accessories for use with multi tools. Router bits for edge, corner, straight, keyhole, word & letter routing are all included and are suitable for use on many materials like Hardwood, Softwood, Plywood and Laminates.  Features:
- A 7 piece high-quality Dremel router bits set for use with Dremel multi-tools
- With this accessory set, you can perform a diverse range of routing applications; Edge, Corner, Straight, Keyhole, Word & Letter Routing
- Suitable for use i…

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.Specifications:Shank diameter: 2,4 mmWorking diameter: 4,4 mmPack of 2

Diamond Engraving Point. For usage with the Dremel Engraver 290. The Diamond Engraving Point 9929 has a longer lifespan and is for use on harder materials such as glass.Technical details for Diamond Engraving Point:- Glass- Stainless SteelSpecifications:- Length: 3 mm- Width: 3,0 mm- Height: 20,0 mm

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.Specifications:Shank diameter - 3.2 mmWorking diameter - 3.2 mmPack of 2

The Dremel 566 Ceramic Tile Cutting Kit attaches easily to your Dremel Drill and holds it upright to ensure perfectly vertical cutting of ceramic wall tiles. Controlled cutting of ceramic wall tiles Easily attaches to your Dremel tool Easy depth adjustment up to 19 mm material thickness. Supplied complete with cutting bit

The Dremel 575 Angle Adaptor is designed for improving access in difficult workspaces, letting you run accessories perpendicular to the motor in one of 12 different positions. Features & Benefits • Lets you operate accessories at a right angle to the machine • Ball bearings & spiral bevel gears for optimum performance and lifetime • Coupling system allows to place the attachment in one of 12 positions on the multi tool • Quick connect; attaches to your Dremel in seconds Contents • 575 Right Angle Attachment • Driver Cap

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• Piloted Beading Bit • A decorative bit for detailed edges Specifications:Shank diameter: 3,2 mm Working diameter: 9,5 mm Usage: Piloted Beading

Features & Benefits:• Piloted Corner Rounding Bit• Rounding over edges and corners Specifications:Shank diameter: 3,2 mm Working diameter: 9,5 mm Usage: Corner Rounding

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• V-Groove Bit• For sign word and lettering Specifications:Shank diameter: 3,2 mm Working diameter: 6,4 mm Usage: V-GrooveMaximum RPM: 35.000 1/min

Straight Bits. General purpose routing or grooving.Features & Benefits:• Straight Bits • General purpose routing or grooving Technical specifications:Shank diameter: 3,2 mm Working diameter: 4,8 mm Usage: StraightMaximum RPM: 35.000 1/min

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• Straight Bits• General purpose routing or groovingSpecifications:Shank diameter: 3,2 mm Working diameter: 6,4 mm Usage: StraightMaximum RPM: 35.000 1/min

For Routing, Mounting Slots In Picture Frames Or Anything That Needs To Be Hung.Specifications:- Shank Diameter: 3,2 Mm- Working Diameter: 8 Mm- Working Length: 2,7 Mm- Usage: Keyhole Router Bit- Maximum Rpm: 35.000 1/Min

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.Specifications:Shank diameter: 2,4 mmWorking diameter: 2,0 mmPack of 2

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, leather, ceramic tile. Shank Diameter: 3.2mm. working Diameter: 7.8mm. Accessory length: 40mm. Maximum speed: 35,000rpm.

Very tough bit, for material removal of fiberglass, wood or ceramic tile.Specifications:- Shank Diameter: 3,2 Mm- Working Diameter: 19 Mm- Accessory Length: 45 Mm- Width: 19 Mm- Length: 19 Mm- Height: 45 Mm- Maximum Rpm: 35.000 1/Min

Efficient and versatile, the EZ SpeedClic Mandrels makes accessory changes easy as PULL - TWIST - RELEASE. The EZ402 Mandrel is for use with exclusive EZ Lock Accessories. Features and Benefits First patented system of its kind. Compatible with all Dremel rotary tools. Professional's choice. Maximum RPM: 35.000 1/min. Shank diameter: 3.2mm Length: 38mm

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

A flexible heat resistant mat that can be used to catch excessive glue and to create decorative glue design patterns: allow glue to cool and peel it off easily. The pad is suitable for all types of melted glue and can be used endlessly.Specifications:Size: 20 x 20 cm

To be used on Dremel model 920 and 930 (low-temperature). Can be used for a variety of decorations on paper, carton, glass, textile, wood, plastics, etc. Colour sticks can also be used for sealing and stamp decorations.Specifications:Length: 100 mm Diameter: 7 mm Operating temperature: 105-140 °CPack of 12