Power Tool Accessories Dremel

Milling Accessory

This router bit set contains all 7 of Dremel's high-quality routing accessories for performing a diverse range of routing applications The Dremel 26150660JA 260 router bit set contains a variety of Dremel's most popular routing accessories for use with multi tools. Router bits for edge, corner, straight, keyhole, word & letter routing are all included and are suitable for use on many materials like Hardwood, Softwood, Plywood and Laminates.  Features:
- A 7 piece high-quality Dremel router bits set for use with Dremel multi-tools
- With this accessory set, you can perform a diverse range of routing applications; Edge, Corner, Straight, Keyhole, Word & Letter Routing
- Suitable for use i…

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles. 7105 Diamond Wheel Point 4.4 mm Shank diameter: 3.2 mm Working diameter: 4.4 mm Accessory length: 46 mm Width: 4 mm Length: 4 mm Height: 46 mm Maximum RPM: 25,000 1/min 7122 Diamond Wheel Point 2.4mm Shank diameter: 3.2 mm Working diameter: 2.4 mm Accessory length: 46 mm Width: 3 mm Length: 3 mm Height: 46 mm Maximum RPM: 25,000 1/min

Diamond Engraving Point. For usage with the Dremel Engraver 290. The Diamond Engraving Point 9929 has a longer lifespan and is for use on harder materials such as glass.

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Shank diameter: 3.2mm Max. speed: 30000rpm

The Dremel 566 Ceramic Tile Cutting Kit attaches easily to your Dremel Drill and holds it upright to ensure perfectly vertical cutting of ceramic wall tiles. Controlled cutting of ceramic wall tiles Easily attaches to your Dremel tool Easy depth adjustment up to 19 mm material thickness. Supplied complete with cutting bit

The Dremel 575 Angle Adaptor is designed for improving access in difficult workspaces, letting you run accessories perpendicular to the motor in one of 12 different positions. Features & Benefits • Lets you operate accessories at a right angle to the machine • Ball bearings & spiral bevel gears for optimum performance and lifetime • Coupling system allows to place the attachment in one of 12 positions on the multi tool • Quick connect; attaches to your Dremel in seconds Contents • 575 Right Angle Attachment • Driver Cap

Piloted Beading Bit. A decorative bit for detailed edges. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 9.5mm. Working length: 4.8mm Accessory length: 37mm Usage: Piloted beading. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

V-Groove Bit. For sign word and lettering. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 6.4mm. Working length: 2mm Accessory length: 37mm Usage: V-groove. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

Piloted Corner Rounding Bit. Rounding over edges and corners. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 4.8mm. Working length: 1.4mm Accessory length: 36mm Usage: straight. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

Piloted Corner Rounding Bit. Rounding over edges and corners. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 6.4mm. Working length: 2mm Accessory length: 36mm Usage: straight. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

Piloted Corner Rounding Bit. Rounding over edges and corners. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 8.0mm. Working length: 2.7mm Accessory length: 37mm Usage: Keyhole . Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. Technical Specifications: Shank diameter 3.2mm. Working diameter: 3.2mm Accessory length: 39mm. Maximum Speed: 30,000rpm. Recommended attachment: Detailer's Grip Attachment Ref. 577

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

Use for shaping. smoothing and material removal. Use on hardened steel. stainless steel. cast iron. nonferrous metals. fired ceramics. plastics. hardwoods and other hard materials. Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 38.0 mm Max 30.000 rpm

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, leather, ceramic tile. Shank Diameter: 3.2mm. working Diameter: 7.8mm. Accessory length: 40mm. Maximum speed: 35,000rpm.

Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile. Shank diameter: 3.2mm. Working Diameter; 19mm. Accessory length: 45mm. Maximum speed: 35,000rpm.

Efficient and versatile, the EZ SpeedClic Mandrels makes accessory changes easy as PULL - TWIST - RELEASE. The EZ402 Mandrel is for use with exclusive EZ Lock Accessories. Features and Benefits First patented system of its kind. Compatible with all Dremel rotary tools. Professional's choice. Maximum RPM: 35.000 1/min. Shank diameter: 3.2mm Length: 38mm

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

A flexible heat resistant mat that can be used to catch excessive glue and to create decorative glue design patterns: allow glue to cool and peel it off easily. The pad is suitable for all types of melted glue. Size: 20cm x 20cm.

To be used on Dremel model 920 and 930 (low-temperature). Can be used for a variety of decorations on paper, carton, glass, textile, wood, plastics, etc. Colour sticks can also be used for sealing and stamp decorations.Specifications:Length: 100 mm Diameter: 7 mm Operating temperature: 105-140 °CPack of 12

Saw blade for longer cut offs, which are normally limited by the throat depth of the tool. In terms of technical specifications, this blade is identical to the MS51 General Purpose blade, however, its top and bottom parts are 90 degrees twisted. This twist allows a lateral material feed either from left or right, resulting in technically infinite cuts. Technical specifications: Length: 100mm Cutting depth: 12mm. Teeth per centimeter: 6 Blade width: 0.4mm. Blade depth:2.5mm.