Power Tool Accessories Dremel

Work in small spaces with 12 senses to choose from and the normal functions of your Dremel multi-tool.The attachment´s 90° set head offers excellent visibility to the surface while maintaining control of the multi-tool.Just bolt it onto your Dremel multitool to work faster.Its durable, lightweight design offers a multi-tool-like feel while allowing you to work in hard-to-reach spaces.Contents:1 angle head, 1 impeller cover and 1 manual/quick start guide.Length:8.5:cm.Width:3:in.Depth:6:in.SOL Date:01.10.2020:Retired:no:Reasons to buy (online dealer):Work in small spaces with 12 senses to choose from and the normal functions of your Dremel multitool:Product box length:9:cm.Product box height:12:cm.Pr…

This router bit set contains all 7 of Dremel's high-quality routing accessories for performing a diverse range of routing applications The Dremel 26150660JA 260 router bit set contains a variety of Dremel's most popular routing accessories for use with multi tools. Router bits for edge, corner, straight, keyhole, word & letter routing are all included and are suitable for use on many materials like Hardwood, Softwood, Plywood and Laminates.  Features:
- A 7 piece high-quality Dremel router bits set for use with Dremel multi-tools
- With this accessory set, you can perform a diverse range of routing applications; Edge, Corner, Straight, Keyhole, Word & Letter Routing
- Suitable for use i…

Milling Accessory

Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile. Shank diameter: 3.2mm. Working Diameter; 19mm. Accessory length: 45mm. Maximum speed: 35,000rpm.

Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, leather, ceramic tile. Shank Diameter: 3.2mm. working Diameter: 7.8mm. Accessory length: 40mm. Maximum speed: 35,000rpm.

For Routing, Mounting Slots In Picture Frames Or Anything That Needs To Be Hung.Specifications:- Shank Diameter: 3,2 Mm- Working Diameter: 8 Mm- Working Length: 2,7 Mm- Usage: Keyhole Router Bit- Maximum Rpm: 35.000 1/Min

Diamond Engraving Point. For usage with the Dremel Engraver 290. The Diamond Engraving Point 9929 has a longer lifespan and is for use on harder materials such as glass.Technical details for Diamond Engraving Point:- Glass- Stainless SteelSpecifications:- Length: 3 mm- Width: 3,0 mm- Height: 20,0 mm

Dremel (566) tile cutting set is designed for making controlled, precision cuts in ceramic wall tiles
The attachment easily screws on to the nose of your Dremel rotary tool (all models except 8050 Micro and 2050 Stylo+)
The large windows allow you to work with maximum visibility and safety
Depth adjustment up to 19 mm thickness
Included: 1x cutting guide attachment, 1x spiral cutting bit (562)

A flexible heat resistant mat that can be used to catch excessive glue and to create decorative glue design patterns: allow glue to cool and peel it off easily. The pad is suitable for all types of melted glue. Size: 20cm x 20cm.

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.

Features:- Piloted Beading Bit.- A decorative bit for detailed edges.Specifications:- Shank Diameter: 3,2 Mm- Working Diameter: 9,5 Mm- Working length: 4,8 mm- Accessory Length: 37,0 Mm- Usage: Piloted Beading- Width: 5,0 Mm- Length: 5,0 Mm- Height: 37 Mm- Maximum Rpm: 35.000 1/Min

Saw blade for longer cut offs, which are normally limited by the throat depth of the tool. In terms of technical specifications, this blade is identical to the MS51 General Purpose blade, however, its top and bottom parts are 90 degrees twisted. This twist allows a lateral material feed either from left or right, resulting in technically infinite cuts. Technical specifications: Length: 100mm Cutting depth: 12mm. Teeth per centimeter: 6 Blade width: 0.4mm. Blade depth:2.5mm.

Use for shaping. smoothing and material removal. Use on hardened steel. stainless steel. cast iron. nonferrous metals. fired ceramics. plastics. hardwoods and other hard materials. Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 38.0 mm Max 30.000 rpm

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles. 7105 Diamond Wheel Point 4.4 mm Shank diameter: 3.2 mm Working diameter: 4.4 mm Accessory length: 46 mm Width: 4 mm Length: 4 mm Height: 46 mm Maximum RPM: 25,000 1/min 7122 Diamond Wheel Point 2.4mm Shank diameter: 3.2 mm Working diameter: 2.4 mm Accessory length: 46 mm Width: 3 mm Length: 3 mm Height: 46 mm Maximum RPM: 25,000 1/min

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

Efficient and versatile, the EZ SpeedClic Mandrels makes accessory changes easy as PULL - TWIST - RELEASE. The EZ402 Mandrel is for use with exclusive EZ Lock Accessories. Features and Benefits First patented system of its kind. Compatible with all Dremel rotary tools. Professional's choice. Maximum RPM: 35.000 1/min. Shank diameter: 3.2mm Length: 38mm