Computer Cooling EKWB

EK-Quantum Kinetic TBE 120 DDC PWM D-RGB combo unit is a pump-reservoir assembly that is based upon a market-proven DDC pump that brings the ultimate power in a small form factor. The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine DDC 3.2 pump that is a favorite among the small-form-factor PC enthusiast community! The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops. The DDC motor is cooled by the integrated heatsink on the bottom.The CNC-machined black POM acetal top features three G1/4" ports. One of the po…

EKWB EK-CryoFuel Concentrated Blood Red - Liquid

EK-Quantum Torque HDC 14 fittings are EK's new minimalistic 14mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The …

Replacement thermal conductive pad for use with EK water blocks. Along with thermal conductivity, it provides great elasticity and elongation with natural tack on one side. Can be used multiple times, thus offering great reworkability and electrical insulation.Thermal pads are used to fill air gaps caused by imperfectly flat or smooth surfaces which should be in thermal contact. Please consult your installation manual prior purchasing to see what size and thickness is correct for your EK water block.Thermal conductivity: 3.5 W/mK (+/-0.35) General dimensions: Type F (120 x 16 mm)Thickness: 0.5mm Working Temperature: -55 ~ +200°CHardness: 5 (Shore A)Elongation: 100% Specific Gravity: 2.6 g/cm3 (…

A set of twenty (20) spare 30mm long screws for EK-Quantum Surface S, P, and X series radiators.Recommended for mounting 25-27mm thickness fans to the radiator directly or through a case fan mounting.Specifications:- Thread: M4- Screw length: 30mm- Head type: Phillips

EK-Quantum Vector² FTW3 RTX 3080/90 Backplate - Silver is a CNC machined retention backplate made from aluminum with a natural anodized finish, that fits all EK-Quantum Vector² FTW3 RTX 3080/3090 water blocks. This Silver finish perfectly complements EK's Satin Titanium products. The backplate covers the whole length of the graphics card's PCB, serves as an aesthetic add-on, and also provides passive cooling for the backside of the voltage regulation module (VRM) and the GPU core. Enclosed: - EK-Quantum Vector² FTW3 RTX 3080/90 Backplate - Silver - Mounting mechanism - Thermal pads Compatible: - https://www.ekwb.com/configurator/waterblock/3831109891278

EK-Quantum Torque Micro Rotary adapter fittings allow you to make a simple 90° turn in the smallest possible footprint and installation height. With an overall installed height of just 21mm, Torque Micro Rotaries can squeeze into the most difficult places where it would be otherwise impossible to make a bend. This means it is 10mm lower in height than the standard 90° EK-Quantum Torque Rotary angled fitting. This Quantum Line adapter fitting is CNC-machined from a solid brass bar and protected with a high-quality satin Silver finish. The two parts of the fitting are permanently assembled and sealed with high-quality rubber O-rings. Satin Titanium EK-Quantum Torque series fittings are …

The EK-RES X3 - Multiport TOP WHITE is an alternative white top end cap for EK-RES X3 series reservoir which offers additional port configurations.This TOP allows installation of three tubes which needs to be purchased separatelly (appropriate lenght, depending on the version of the reservoir). These tubes, which are sealed with quality NBR rubber gasket, allow the ports on this TOP to be used as an outlet ports as well.EK-RES X3 - Multiport TOP WHITE is made of quality machined white POM Acetal material.Contents:- EK-RES X3 - Multiport TOP WHITE acetal end cap- EK-Plug G1/4 (3 pcs)- spare sealing gasket (o-ring / OR 52x2.5)Compatibility:This product is compatible with the following EK reservoirs:- …

EK-Quantum Torque Micro HDC 12 - Black is a premium 12mm fitting made for solid tubing, such as acrylic, PETG, and brass. A much smaller footprint will allow tube placement in places where a regular fitting would be too large or inconvenient. It was named Micro due to an installed height of only 11.5mm, which is 23% shorter than standard Torque HDC 12 fittings. The outer diameter of the fitting is also significantly smaller than its bigger brother, with only 16mm across the fitting. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro compression ring. The fitting is made of CNC-machined brass with a satin black finish. The surface of the fitting is smooth …

Accessory/Water Control System

Kinetic series pump-reservoir combos are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!All new Flat (FLT) series EK-Quantum Kinetic FLT D5 pump-reservoir units! The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine D5 pump! Each unit is featuring standard 120mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.EK-Quantum Kinetic FLT D5 series pump-reservoir un…

EK-Quantum Torque HDC 12 fittings are EK's new minimalistic 12mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The …

EK-Loop D5 MX PWM Motor is a low-power version of the full D5 water pump with PWM speed control via the motherboard or a dedicated fan/pump controller. Compared to the full-power D5 G3, it has a 20% lower flow rate and a weaker head pressure. It uses less power, with only a 15W power draw. Also, power is drawn via Molex connector compared to the SATA on the G3. EK-Loop D5 MX PWM is an original Xylem D5 PWM pump, with a reduced power draw. PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper-quiet operation in idle mode! This pump is ideal for PC and other electronics water cooling. The D5 pump is equipped with an electronically …

EK-Loop Soft Tube 10/13mm 3m - Clear is the highest clarity transparent soft tubing EK has ever created. It has high transmissibility to UV-Type A and UV-Type B, allowing compatibility with UV reactive coolants. But it also has low transmissibility to UV-Type C to prevent deterioration and discoloration of the coolant. Designed and manufactured for the most demanding customers, who want the added practicality and ease of use of soft tubing.High resistance to leaching was one of the paramount focuses while making this tubing. EK-Loop Soft Tube uses a non-Phthalate plasticizer. It is resistant to degradation and discoloration from Beta, UV, and Gamma rays. All components used in manufacture are …

The EK-Revo D5 Pump Mount features improved soft rubber shock absorber with enhanced vibration reducing pattern!The EK-Revo D5 Pump is designed to be used with D5 pumps and existing XTOP D5 products from the Revo lineup.Contents:- Mounting clip with rubber insert- Self-adhesive mounting hole pattern sticker

EK-HD Adapter is a solid-tube fitting, intended to be used with solid tubing such as Acrylic or Copper tube. Used in conjuction with EK-HD Tube it can also be used for connecting multiple Full Cover water blocks as an alternative method to using EK-FC Terminal system.The product is made of machined brass with quality O-rings. These adapters are fully compatible with EK-CSQ series (45/90) angled adapters.Specification:- Thread: G1/4" BSP; 4.5mm male thread lenght- Supported tube: 16mm (OD)- Outer diameter of a fitting: 21.7mm- Installed height: 11mm- Compatible tubing: solid Acrylic-, Copper-, Brass- or Stainless Steel tube

For those who demand the most cooling power out of an EK-Quantum Surface radiator, the 58mm-thick X Series is the right choice. These thick radiators will benefit the most from medium and high-speed fans or even a Push/Pull setup. Equipped with a total of four G1/4“ threaded connection ports, the X Series provides additional versatility during the loop planning process. The fifth G1/4“ port located on the end-tank is an irreplaceable feature when it comes to draining the loop and air bleeding. A total of sixteen 2mm wide copper tubes across the entire radiator ensure optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density …

EK-Loop Hard Tube is a solid type of extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only!It is mandatory to chamfer the edges of the freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0,5mm x 45° chamfer.Technical data:- Material: Extruded acrylic- Inner diameter: 10 mm- Outer diameter: 14 mm- Length: 2x 500 mm (19.5")The package contains 2 pieces of the tube only. Please purchase EK-HD Adapter or EK-HDC compression fittings separately!

EK-Quantum Torque Extender Static MM 14 is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads. This is not a revolvable extender. Made from nickel-plated CNC machined brass with a satin silver finish. Sealed with quality EPDM O-rings. Satin Titanium Quantum Torque series extenders are intentionally not painted on the inside to reduce the level of possible pollutants in the loop. These static extenders can be either tightened by hand or by using EK-Loop Multi Allen Key / Allen Key 9mm (not included, available for separate purchase). Technical data: - Threading: 2 x G1/4" (…

EK-Loop UNI Pump Reservoir Bracket - 140mm is a mounting adapter for installation of EK D5, DDC, SPC, and VTX pumps and pump-reservoir combo units to any 140mm fan mounting hole pattern (125mm hole spacing). Additionally, it can be used with EK-RES X3 Holder 60mm (2pcs) to mount any reservoir or pump-reservoir combo with a tube of 60mm in diameter.It can be used horizontally or vertically. The offset on the bracket allows for precise placement of the pump or reservoir according to your needs for clearance or easier tube routing. By turning the bracket around the offset can be moved left, right, back, or forward in a horizontal setup, and also left, right, up, or down in a vertical setup.Made …