Computer Cooling EKWB

EK-Cable Y-Splitter 3-Fan PWM is a simple adapter used to hook three DC or PWM fans to one motherboard 4-pin PWM or 3-pin DC FAN connector. Please note RPM sensing will only work for one fan when using this cable. Caution: Do not use high power fans with this adapter due to the possibility of overloading motherboard fan power regulator. The limit of a fan header on a typical motherboard is usually around ~10W. Features: - Connect three (PWM) fans from one (PWM) fan header - Compatible with 3-pin DC fans and fan connectors. - Fully sleeved cables (total length ~ 100mm) - RoHS compliant

EK-UNI Pump Bracket (140mm FAN) Vertical is a mounting adapter for installation of Xylem D5 powered EK-XTOP Revo D5 and EK-XRES Revo D5 units to any 140mm fan hole pattern application. It can be used for vertical and horizontal position.Compatibility- EK-XRES Revo D5 series (any)- EK-XTOP Revo D5 series (any)- EK-XTOP DDC series (any)Contents:- EK-UNI Pump Bracket (140mm Fan) Vertical- 5x polyamid washer M4 0,8- 5x screws M4x6 DIN7984- 5x nut M4- Allen key 2,5

EK-Quantum Torque Splitter 3F T - Satin Titanium is a simple cylinder-shaped adapter fitting with 3 (three) G1/4" Female threads. This product is useful for splitting or combining the liquid flow in your loop. Made from CNC machined brass with a satin titanium finish. Technical specifications: - Threading: G1/4" - Thread length: 4.5mm - Diameter: 23mm - Installed height: 28mm

EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90 Degree - Acrylic is a 6-pack of 10/12mm (ID/OD) acrylic tubing bent to a 90-degree angle
Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems
Comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run
Tubing length of 250mm and 550mm on either side of the bend
Material: Extruded acrylic

Accessory/Water Control System / EKWB EK-Loop Connect / 2 x G1/4"

EK-Vardar X3M Damper Pack Purple is a 4-piece colored rubber corner pack that is mounted on EK-Vardar X3M fans. These anti-vibration rubber mounts are used to reduce vibration transfer to the rest of the PC.These rubber corners are compatible only with the EK-Vardar X3M fans and are screwed in by 3mm Allen supplied with the fan itself. Inside the rubber corners, there is a plastic insert making sure perfect mounting is achieved and rubber is not squished too much.Enclosed:- EK-Vardar X3M damper x4

EK-Quantum Velocity² IHS Removal Tool - 1700 is a delidding or IHS removal tool. It allows users to remove the Integrated Heat Spreader (IHS) from their CPUs and directly cool the CPU die. It is a safe, easy, quick, and ultimately practical way of removing the IHS. While the IHS and CPU Die look flat to the human eye, the surface is actually very uneven.Thermal compounds are used to fill the gaps between the CPU and IHS surfaces. But even with high-quality thermal compounds and even solder, it still accounts for an additional layer before reaching the cooler, resulting in reduced cooling efficiency. Additionally, the silicone adhesive that “glues” the IHS to the CPU can …

EK-CryoFuel Solid non-transparent coolants are all based on a new patent-pending formula with vivid, long-lasting colour stability. The coolant contains everything a high-end liquid cooling system requires for efficient thermal performance and providing the necessary protection for your water blocks. It carries the essential synergistic corrosion inhibitors and biological inhibitors - thus promoting long and safe operational life for your liquid cooling products and high thermal efficiency.With countless hours of in-house and third-party real-life scenario testing, EK-CryoFuel Solid is the most chemically stable coolant that provides enthusiasts with the best possible level of performance and …

EK-Quantum Magnitude Accent - sTRX4 Black is an interchangeable aesthetic inner frame for EK's new Magnitude sTRX4 water block. This black accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude sTRX4 CPU water blocks.

EK-Quantum Torque Rotary Offset 3 - Nickel is a premium revolvable male+female threaded offset adapter fitting. It is commonly used to distance or offset G1/4" ports in tight spaces or to perfectly align hard tubing to another port in order to have aesthetically pleasant parallel tubing. Aesthetically, it is a perfect match with the EK-Quantum Torque series fittings and adapters. Made from nickel-plated CNC machined brass. Sealed with quality EPDM O-rings. These offsets adapter fittings are rotary and they can be rotated around their axis in 360 degrees to fine-tune and find the exact positioning required. Technical data: - Threading: 2 x G1/4" (Male - Female) - Thread length: 4.5mm - Material: …

EK-Quantum Torque Static FF 90° is a 90° adapter fitting with two female G1/4" threads. This adapter allows the connection of two fittings, adapters, or extenders with male G1/4" threads to extend tubing possibilities in your water-cooled system. Often used to avoid bending tubes or make fewer bends by utilizing these adapters as an interconnect. Made of nickel-plated CNC machined brass. Technical specifications: - Threading: G1/4" - Thread length: 4.5mm - Diameter: 23mm - Installed height: 25mm

Compensating Reservoir / 4 x G1/4" / 350 Volume

EK ZMT (Zero Maintainance Tubing) is a high quality, zero maintainance industrial grade EPDM rubber tubing in stylish matte black.This tubing is - just like Norprene - designed to withstand harsh conditions for a very long period of time, offering a truly exceptional lifespan even under UV, ozone and heat exposure for many years.Unlike most PVC and PUR tubing this high quality EK made EPDM rubber tubing ensures long lasting operation and does not suffer from plasticizer leaching effect which can cause blockage (gunking) in your liquid cooling loop. This 9,5/15,9mm (ID/OD) tubing also allow for very small bend radius!This may not be the tubing for everyone but it is guaranteed to be hassle-free …

The EK-Quantum Torque Pass-Through G1/4 - Black is a panel-mounted adapter fitting. Equipped with female G1/4" BSP threads on both ends, it enables seamless liquid interconnection between separate chassis compartments. This fitting is particularly well-suited for compact small form factor (SFF) cases that lack space for internal radiator placement, necessitating external positioning. This Adapter Fitting is secured to the panel with the enclosed grip nut. It is constructed from nickel-plated CNC-machined brass, ensuring durability and an appealing aesthetic. Technical data: - Threading: 2 x G 1/4" (Female-Female) - Thread length: 4.5mm - Hole Diameter: 20.0mm - Max thickness of the wall …

EK-Loop Soft Tube 12/16mm 3m - Clear is the highest clarity transparent soft tubing EK has ever created. It has high transmissibility to UV-Type A and UV-Type B, allowing compatibility with UV reactive coolants. But it also has low transmissibility to UV-Type C to prevent deterioration and discoloration of the coolant. Designed and manufactured for the most demanding customers, who want the added practicality and ease of use of soft tubing.High resistance to leaching was one of the paramount focuses while making this tubing. EK-Loop Soft Tube uses a non-Phthalate plasticizer. It is resistant to degradation and discoloration from Beta, UV, and Gamma rays. All components used in manufacture are …

EK-Quantum Torque Plug w/Cover 10-Pack - Black is a premium Quantum G1/4" plug set of 10 pieces for closing the unused ports on your water cooling equipment. Ideal for when you don’t want G1/4" plugs to be seen. These black ABS covers are in the shape of the EK logo, provide a stylish look, and are easy to align in any direction so that the EK logo is showing in the proper orientation. Plugs are made from nickel-plated CNC machined brass and sealed with quality rubber O-ring. The covers are made of black ABS plastic. Technical data: - Threading: G 1/4" - Thread length: 4.5mm

For those who demand the most cooling power out of an EK-Quantum Surface radiator, the 58mm-thick X Series is the right choice. These thick radiators will benefit the most from medium and high-speed fans or even a Push/Pull setup. Equipped with a total of four G1/4“ threaded connection ports, the X Series provides additional versatility during the loop planning process. The fifth G1/4“ port located on the end-tank is an irreplaceable feature when it comes to draining the loop and air bleeding. A total of sixteen 2mm wide copper tubes across the entire radiator ensure optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density …

EK-Quantum Torque Extender Static MM 7 is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads. This is not a revolvable extender. Made from nickel-plated CNC machined brass painted black. Sealed with quality EPDM O-rings. These static extenders can be either tightened by hand or by using EK-Loop Multi Allen Key / Allen Key 9mm (not included) Technical data: Threading: 2 x G1/4" (Male - Male) Thread length: 4.5mm Diameter: 23mm Height: 7mm

Torque series fittings are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!EK-Torque (Adapter Fitting) - Nickel is a revolvable angled (45°) adapter fitting with G1/4" threads. In the form of a cut-off cylinder, it is very sturdy and there are zero movements in the revolvable joint. This Quantum Line adapter is made in high-quality black nickel finish CNC-ed out of machined brass while the seal is made by quality rubber O-rings. It is an extremely secure and sturdy piece that will last for many future builds.The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your w…