Computer Cooling EKWB

EK-Quantum Velocity² IHS Removal Tool - 1700 is a delidding or IHS removal tool. It allows users to remove the Integrated Heat Spreader (IHS) from their CPUs and directly cool the CPU die. It is a safe, easy, quick, and ultimately practical way of removing the IHS. While the IHS and CPU Die look flat to the human eye, the surface is actually very uneven.Thermal compounds are used to fill the gaps between the CPU and IHS surfaces. But even with high-quality thermal compounds and even solder, it still accounts for an additional layer before reaching the cooler, resulting in reduced cooling efficiency. Additionally, the silicone adhesive that “glues” the IHS to the CPU can …

EK-Quantum Vector² Trio RTX 3080/90 ABP Side Cover - Silver is a metal plate covering the gap between the water block and the active backplate. It is made from aluminum with a natural anodized finish. It is used exclusively in conjunction with both the water block and the active backplate. This Silver finish perfectly complements EK's Satin Titanium products.It hides the terminal side of the PCB, ensuring that no part of the PCB is visible.Enclosed:- EK-Quantum Vector² Trio RTX 3080/90 ABP Side Cover - Silver

EK-Quantum Torque Micro Rotary adapter fittings allow you to make a simple 90° turn in the smallest possible footprint and installation height. With an overall installed height of just 21mm, Torque Micro Rotaries can squeeze into the most difficult places where it would be otherwise impossible to make a bend. This means it is 10mm lower in height than the standard. This Quantum Line adapter fitting is CNC-machined from a solid brass bar and protected with Nickel plating. The two parts of the fitting are permanently assembled and sealed with high-quality rubber O-rings. Since there is no space for conventional knurling, the base of the fitting extends through an opening in the top face …

The EK-RES X3 TOP is an replacement top end cap for EK-RES X3 series reservoirs and other RES X3 based parts.EK-RES X3 TOP is made of quality machined POM Acetal material.Contents:- EK-RES X3 TOP- including sealing gasket (o-ring / OR 52x2.5)Compatibility:This spare part is compatible with the following EK reservoirs:- EK-RES X3 110- EK-RES X3 150- EK-RES X3 250- EK-RES X3 400- EK-DDC X-RES CSQ- EK-D5 X-RES CSQMade in Slovenia - EU!Please note:- G 1/4 plug to close the port is no enclosed.- Allen key 6mm, required for tightening of G1/4 plugs, is not enclosed. It is however being enclosed within each delivery of the EK-RES X3 series reservoirs.

EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes …

EK-Quantum Torque Drain Valve - Black is a premium fitting acting as a perfect draining point in your system. It features a secure cap, in form of a Torque fitting compression ring, and it can even fit an aesthetic color ring for HDC 16 Torque fittings. The secure-cap does not allow you to accidentally open, or leave open the drain valve. This drain valve has an advantage over the traditional ball valves in terms of size. It has a smaller footprint, secure locking, and an easy open/close mechanism that works on a slide. It has a male thread on one end, allowing you to screw it directly into a G1/4" female port on any water cooling component without the use of an adapter fitting as traditional …

EK-Quantum Torque Extender Static MM 14 is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads.This is not a revolvable extender.Made from nickel-plated CNC machined brass painted black. Sealed with quality EPDM O-rings.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The Torque family of fittings offers a secure and modular …

Kinetic series pump-reservoir combos are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!All new Flat (FLT) series EK-Quantum Kinetic FLT DDC pump-reservoir units! The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine DDC pump! Each unit is featuring standard 120mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.EK-Quantum Kinetic FLT DDC series pump-reservoir un…

Are you looking to add some subtle colour to your system without all the flashing lights then these fittings allow you to do that. The EK Torque fittings offer the ability to add one of 7 colours to your fitting to match your system colour scheme.Torque series fittings are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!EK-Torque HTC 16 fittings are EK's new minimalistic 16mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and …

EK-QuantumX Loophole Distroplate D5 PWM - Silver is a custom water-cooling reservoir, routing, and pump solution that can be mounted on 140mm fan patterns inside the chassis (provided there’s enough room for it in the case). It is unique in the sense that there are no pre-made channels for coolant routing. Instead, the channels are built by the user. As the waterway has no prebuilt inner channels but rather an “open space” internal structure, the user can custom-route tubes from one port to another within the distro itself using micro 90-degree angled adapters and micro HDP or HDC fittings. The distro can be mounted on practically any 280mm (2x140mm) mounting point, and with …

EK-Loop Soft Tube 10/16mm 3m - Clear is the highest clarity transparent soft tubing EK has ever created. It has high transmissibility to UV-Type A and UV-Type B, allowing compatibility with UV reactive coolants. But it also has low transmissibility to UV-Type C to prevent deterioration and discoloration of the coolant. Designed and manufactured for the most demanding customers, who want the added practicality and ease of use of soft tubing.High resistance to leaching was one of the paramount focuses while making this tubing. EK-Loop Soft Tube uses a non-Phthalate plasticizer. It is resistant to degradation and discoloration from Beta, UV, and Gamma rays. All components used in manufacture are …

EK-Cable Pump testing adapter is a simple adapter cable for connecting any liquid cooling pump (with 4-pin fan header) or computer cooling fan with SATA power cable. This adapter is recommended to be used only for testing purposes while leak-testing your loop and is intended to be connected directly to PSU, without the need for powering up the entire system. The cable is approximately 15cm long.Features: - 3-pin fan header to SATA power adapter- RoHS compliant

EK-Quantum Magnitude Accent - sTRX4 Green is an interchangeable aesthetic inner frame for EK's new Magnitude sTRX4 water block. This green accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude sTRX4 CPU water blocks.

Equipped with a total of eight G1/4“ threaded connection ports, the EK-Quantum P Series X-Flow Surface radiators allow for an unbeatable combination of versatility and performance within the PC radiator market. With the 44mm thickness, they still provide ample performance across the entire fan operational range, regardless of which crossflow port setup the user chooses. A total of sixteen 2mm wide copper tubes across the whole radiator length enable optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density provide the best balance between thermal transfer and air resistance for optimal performance even at low-speed fan operation.…

EK-Loop Soft Tube Cutter is a small handy tool specifically made for soft tube cutting. It is compatible with various flexible soft tubing types such as PVC, EPDM, Norprene, silicone, etc. The maximum size compatibility of the cutter is 16mm (5/8'') OD. This soft tube cutter makes a precise even cut allowing perfect fitment onto the fitting and superior aesthetics.This tool is used by opening it, putting the soft tubing inside it's "mouth" and pressing down with force depending on the thickness of the tubing wall.Enclosed:- EK-Loop Soft Tube Cutter tool

EK-Quantum Torque Extender Static MF 28 is a premium male+female threaded extender. It is commonly used to extend a G1/4" port from a block, radiator or any other liquid-cooling component in order to ease the process of connecting to other components and having fewer bends or inaccessible fittings at tight places. This is not a revolvable extender. Made from CNC machined brass with satin silver finish. Sealed with quality EPDM O-rings. Satin Titanium Quantum Torque series extenders are intentionally not painted on the inside to reduce the level of possible pollutants in the loop. These static extenders can be either tightened by hand or by using EK-Loop Multi Allen Key / Allen Key 9mm (not …

Water Cooling Accessory

Includes a total of six G1/4" ports
Tube Reservoir Diameter: 60mm
Overall unit height: 200mm
Features sophisticated addressable D-RGB lighting

Internal diameter (ID): 11,1mm (7/16") Outer diameter (OD): 16,1mm (5/8")EK ZMT (Zero Maintenance Tubing) is a high quality, zero maintenance, industrial grade EPDM rubber tubing in stylish matte black.This tubing is - just like Norprene - designed to withstand harsh conditions for a very long period of time, offering a truly exceptional lifespan even under UV, ozone and heat exposure for many years.Unlike most PVC and PUR tubing this high quality EK made EPDM rubber tubing ensures long lasting operation and does not suffer from a plasticizer leaching effect which can cause blockage (gunking) in your liquid cooling loop. This 11,1/16,1mm (ID/OD) tubing also allow for very small bend radius!This …