Computer Cooling EKWB

The EK-Quantum Reflection² PC-O11D XL D5 PWM D-RGB is a custom water cooling reservoir, routing, and pump solution that seamlessly fits into the front of the case. This waterway is also equipped with 6 innovative push-in ports that come with female G1/4″ threaded adapters. The idea is that a user can assemble the whole radiator + fittings + tubing and use these push-in adapters to simply slide it into the distro plate. With the installed distro plate, the maximum radiator size is the following: Top: EK-Quantum Surface P360 Bottom: EK-Quantum Surface X360 Side: EK-Quantum Surface P360 EK-Matrix7 Support Matrix7 standardizes the products' dimensions, including the port …

HDD Cooler / 2 x G1/4"

EK-Quantum Torque Micro Extender Static MM 7 - Satin Titanium is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads. This extender is especially useful in situations where the port spacing is too low, or due to clearance issues. This is not a revolvable extender. Made from CNC machined brass with a Satin Titanium finish. Sealed with quality EPDM O-rings. These static extenders can be either tightened by hand or by using EK-Loop Multi Allen Key / Allen Key 9mm (not included) Technical data: Threading: 2 x G1/4" (Male - Male) Thread length: 4.5mm Diameter: 16.5mm Height: 7mm…

Radiator / EK Water Blocks EK-Quantum Surface / Fan Size 140 / Fan (pre-installed) 0 / Fan (maximum) 8 / 5 x G1/4"

EK-Quantum Torque Rotary Offset 3 - Black is a premium revolvable male+female threaded offset adapter fitting. It is commonly used to distance or offset G1/4" ports in tight spaces or to perfectly align hard tubing to another port in order to have aesthetically pleasant parallel tubing. Aesthetically, it is a perfect match with the EK-Quantum Torque series fittings and adapters. Made from CNC machined brass in a satin black finish. Sealed with quality EPDM O-rings. These offsets adapter fittings are rotary and they can be rotated around their axis in 360 degrees to fine-tune and find the exact positioning required. EK-Quantum Torque series products received the prestigious iF Design Award.…

EK-Quantum Torque Splitter 3F T - Black is a simple cylinder-shaped adapter fitting with 3 (three) G1/4" Female threads. This product is useful for splitting or combining the liquid flow in your loop. Made from CNC machined brass with a satin black finish. EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The Torque family of fittings offers a secure and modular system of connections between liquid cooling components and tubing within …

EK-Quantum Magnitude Accent - Black is an interchangeable aesthetic inner frame for EK's new Magnitude water block. This black accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation.This Magnitude accent is made of anodized aluminum.Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude CPU water blocks

The EK-HD PETG Inserts are EK's way of battling against potential hazards that the use of PETG tubes present. PETG tubes are extremely popular because of the ease of use and their flexibility. On the other hand, PETG tubing, especially the thin tube wall models (10/12) are prone to deformation when exposed to high temperatures (40°C and above). The deformation rate depends on the duration and maximum temperature reached. These temperatures can be reached with pump failures, water block clogging, etc. The EK-HD PETG Inserts provide a safety measure for 12mm OD / 10mm ID PETG tubes which prevents the tube wall from collapsing inside the compression fitting. The EK-HD PETG Insert is low …

EK-Quantum Velocity² IHS Removal Tool - 1700 is a delidding or IHS removal tool. It allows users to remove the Integrated Heat Spreader (IHS) from their CPUs and directly cool the CPU die. It is a safe, easy, quick, and ultimately practical way of removing the IHS. While the IHS and CPU Die look flat to the human eye, the surface is actually very uneven.Thermal compounds are used to fill the gaps between the CPU and IHS surfaces. But even with high-quality thermal compounds and even solder, it still accounts for an additional layer before reaching the cooler, resulting in reduced cooling efficiency. Additionally, the silicone adhesive that “glues” the IHS to the CPU can …

EK-Quantum Vector² Trio RTX 3080/90 ABP Side Cover - Silver is a metal plate covering the gap between the water block and the active backplate. It is made from aluminum with a natural anodized finish. It is used exclusively in conjunction with both the water block and the active backplate. This Silver finish perfectly complements EK's Satin Titanium products.It hides the terminal side of the PCB, ensuring that no part of the PCB is visible.Enclosed:- EK-Quantum Vector² Trio RTX 3080/90 ABP Side Cover - Silver

EK-Quantum Torque Micro Rotary adapter fittings allow you to make a simple 90° turn in the smallest possible footprint and installation height. With an overall installed height of just 21mm, Torque Micro Rotaries can squeeze into the most difficult places where it would be otherwise impossible to make a bend. This means it is 10mm lower in height than the standard 90° EK-Quantum Torque Rotary angled fitting. This Quantum Line adapter fitting is CNC-machined from a solid brass bar and protected with a high-quality Satin Black finish. The two parts of the fitting are permanently assembled and sealed with high-quality rubber O-rings. Black EK-Quantum Torque series fittings are intentionally …

The EK-RES X3 - Multiport TOP is an alternative top end cap for EK-RES X3 series reservoir which offers additional port configurations.This TOP allows installation of three tubes which needs to be purchased separatelly (appropriate lenght, depending on the version of the reservoir). These tubes, which are sealed with quality NBR rubber gasket, allow the ports on this TOP to be used as an outlet ports as well.EK-RES X3 - Multiport TOP is made of quality machined POM Acetal material.Contents:- EK-RES X3 - Multiport TOP acetal end cap- EK-Plug G1/4 (3 pcs)- spare sealing gasket (o-ring / OR 52x2.5)Compatibility:This product is compatible with the following EK reservoirs:- EK-RES X3 150- EK-RES …

EK-Quantum Vector Strix RX 6800/6900 Backplate - Nickel is a CNC machined retention backplate made from nickel-plated aluminum, that fits all EK-Quantum Vector Strix RX 6800/6900 water blocks. The backplate covers the whole length of the graphics card's PCB, serves as an aesthetic add-on, and also provides passive cooling for the backside of the voltage regulation module (VRM), VRAM, and the GPU core. Enclosed: - EK-Quantum Vector RX Strix 6800/6900 Backplate - Nickel - Mounting mechanism (the backplate screws are on the other side - separate compartment)* - Thermal pads Compatible: - ASUS ROG Strix LC Radeon RX 6800 XT OC, ROG-STRIX-LC-RX6800XT-O16G-GAMING, (90YV0FL0-M0NM00) - ASUS ROG …

Accessory/Water Control System

EK-Quantum Torque Extender Static FF 14 is a premium male-threaded extender interconnect with female threads on both ends. It is used for connecting two water cooling components which both have male G1/4 threads. This is not a revolvable extender. Made from nickel-plated CNC machined brass painted in black. These static extenders can be either tightened by hand or by using EK-Loop Multi Allen Key Allen Key 9mm (not included) Technical data: Threading: 2 x G1/4" (Female - Female) Thread length: 4.5mm Diameter: 23 mm Height: 14 mm

All new Flat (FLT) series EK-Quantum Kinetic FLT DDC pump-reservoir units! The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine DDC pump! Each unit is featuring standard 120mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops. EK-Quantum Kinetic FLT DDC series pump-reservoir units are equipped with genuine DDC 3.2 pumps, made in Europe, which are capable of delivering flow rates of 1000 liters per hour with a maximum head pressure …

Are you looking to add some subtle colour to your system without all the flashing lights then these fittings allow you to do that. The EK Torque fittings offer the ability to add one of 7 colours to your fitting to match your system colour scheme.Torque series fittings are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!EK-Torque HTC 16 fittings are EK's new minimalistic 16mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and …

EK-QuantumX Loophole Distroplate D5 PWM - Silver is a custom water-cooling reservoir, routing, and pump solution that can be mounted on 140mm fan patterns inside the chassis (provided there’s enough room for it in the case). It is unique in the sense that there are no pre-made channels for coolant routing. Instead, the channels are built by the user. As the waterway has no prebuilt inner channels but rather an “open space” internal structure, the user can custom-route tubes from one port to another within the distro itself using micro 90-degree angled adapters and micro HDP or HDC fittings. The distro can be mounted on practically any 280mm (2x140mm) mounting point, and with …

EK-Loop Soft Tube 10/16mm 3m - Clear is the highest clarity transparent soft tubing EK has ever created. It has high transmissibility to UV-Type A and UV-Type B, allowing compatibility with UV reactive coolants. But it also has low transmissibility to UV-Type C to prevent deterioration and discoloration of the coolant. Designed and manufactured for the most demanding customers, who want the added practicality and ease of use of soft tubing.High resistance to leaching was one of the paramount focuses while making this tubing. EK-Loop Soft Tube uses a non-Phthalate plasticizer. It is resistant to degradation and discoloration from Beta, UV, and Gamma rays. All components used in manufacture are …

EK-Cable Pump testing adapter is a simple adapter cable for connecting any liquid cooling pump (with 4-pin fan header) or computer cooling fan with SATA power cable. This adapter is recommended to be used only for testing purposes while leak-testing your loop and is intended to be connected directly to PSU, without the need for powering up the entire system. The cable is approximately 15cm long.Features: - 3-pin fan header to SATA power adapter- RoHS compliant