Computer Cooling EKWB

Replacement tube for EK-RES X3 series reservoirs.Specification:- Length: 354mm- Diamater: 60mm (OD) / 50mm (ID)- Material: acrylic glassCompatibility:May be use to upgrade or replace the tube on any of the following EK products:- EK-RES X3- EK-DCP 4.0 X-RES- EK-DDC X-RES CSQ- EK-D5 X-RES CSQ- EK-D5 Dual TOP G1/4 CSQ in conjuction with EK-D5 X-RES LINK CSQ- EK-Dual DDC X-TOP CSQ in conjuction with EK-Dual DDC X-RES Link CSQCaution: Not compatible with EK-Multioption RES X2 series reservoir.

EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes …

EK-Quantum Torque Drain Valve - Satin Titanium is a premium fitting acting as a perfect draining point in your system. It features a secure cap, in form of a Torque fitting compression ring, and it can even fit an aesthetic color ring for HDC 16 Torque fittings. The secure-cap does not allow you to accidentally open, or leave open the drain valve. This drain valve has an advantage over the traditional ball valves in terms of size. It has a smaller footprint, secure locking, and an easy open/close mechanism that works on a slide. It has a male thread on one end, allowing you to screw it directly into a G1/4" female port on any water cooling component without the use of an adapter fitting as …

EK-Quantum Torque Extender Static FF 14 is a premium male-threaded extender interconnect with female threads on both ends. It is used for connecting two water cooling components which both have male G1/4 threads. This is not a revolvable extender. Made from nickel-plated CNC machined brass painted in black. These static extenders can be either tightened by hand or by using EK-Loop Multi Allen Key Allen Key 9mm (not included) Technical data: Threading: 2 x G1/4" (Female - Female) Thread length: 4.5mm Diameter: 23 mm Height: 14 mm

Kinetic series pump-reservoir combos are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!All new Flat (FLT) series EK-Quantum Kinetic FLT DDC pump-reservoir units! The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine DDC pump! Each unit is featuring standard 120mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.EK-Quantum Kinetic FLT DDC series pump-reservoir un…

EK-Quantum Torque STC 10/13 fittings are EK's new minimalistic 10/13mm (ID/OD) soft-tube compression fittings designed for use with various flexible soft tubing types such as PVC, EPDM, Norprene, silicone or any other type of compatible flexible tube. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products. The locking ring is compressing the tubing wall underneath the ring, and this prevents the flexible tube from being pulled off the barb of the fitting. The grooves on the outside allow for easier hand tightening.…

EK-QuantumX Loophole Distroplate D5 PWM - Black is a custom water-cooling reservoir, routing, and pump solution that can be mounted on 140mm fan patterns inside the chassis (provided there’s enough room for it in the case). It is unique in the sense that there are no pre-made channels for coolant routing. Instead, the channels are built by the user. As the waterway has no prebuilt inner channels but rather an “open space” internal structure, the user can custom-route tubes from one port to another within the distro itself using micro 90-degree angled adapters and micro HDP or HDC fittings. The distro can be mounted on practically any 280mm (2x140mm) mounting point, and with …

EK-Quantum Torque Push-In adapter M 14 - Satin Titanium is EK's new push-in fitting designed for use exclusively with EK-Quantum Reflection² distribution plates. It has a standard G1/4" male thread with an o-ring at one end, a knurled midsection much like the Quantum Torque Static Extenders, and a male push-in part with two o-rings at the other end that pushes directly into the distro plate without screwing.This adapter greatly helps with attaching a radiator to the Reflection² distribution plate, reducing the strain needed to screw in fittings and adding convenience and ease of use. The fitting is made of CNC-machined brass with a satin silver finish.Technical data:- Finish: Satin …

Specifications:- - Length: 300 mm - Color: Black - Connectors: - 1x 4-pin connector - 1x 4-pin socket - Compatibility: - 4-pin PWM fan - 3-pin fan - EK Water Blocks EK-Cable PWM extension cables are sleeved (30cm)

EK-Quantum Magnitude Accent - sTRX4 Gold is an interchangeable aesthetic inner frame for EK's new Magnitude sTRX4 water block. This gold accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude sTRX4 CPU water blocks.

With a thickness of 44mm, the EK-Quantum P Series Surface radiators are the absolute all-rounders for low noise and high performance across the entire fan operational range. Equipped with a total of four G1/4“ threaded connection ports, it provides additional versatility during the loop planning process, while the fifth G1/4“ port located on the end-tank is an irreplaceable feature when it comes to draining the loop and air bleeding. A total of eighteen 2mm-wide copper tubes across the entire radiator length assure optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density provide the best balance between thermal transfer …

EK-Loop Soft Tube Cutter is a small handy tool specifically made for soft tube cutting. It is compatible with various flexible soft tubing types such as PVC, EPDM, Norprene, silicone, etc. The maximum size compatibility of the cutter is 16mm (5/8'') OD. This soft tube cutter makes a precise even cut allowing perfect fitment onto the fitting and superior aesthetics.This tool is used by opening it, putting the soft tubing inside it's "mouth" and pressing down with force depending on the thickness of the tubing wall.Enclosed:- EK-Loop Soft Tube Cutter tool

EK-Quantum Torque Extender Static MM 7 is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads. This is not a revolvable extender. Made from CNC machined brass with satin silver finish. Sealed with quality EPDM O-rings. Satin Titanium Quantum Torque series extenders are intentionally not painted on the inside to reduce the level of possible pollutants in the loop. These static extenders can be either tightened by hand or by using EK-Loop Multi Allen Key / Allen Key 9mm (not included, available for separate purchase). Technical data: - Threading: 2 x G1/4" (Male - Male) - Thread …

Water Cooling Accessory

EK-Quantum Kinetic TBE D5 combo unit is the revolution of the most popular pump-reservoir assembly design on the market. The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine D5 pump! The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops. The top features three G1/4" ports, one of which has a pre-installed nickel-plated brass internal tube which helps to prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the …

EK ZMT (Zero Maintenance Tubing) is a high quality, zero maintenance, industrial grade EPDM rubber tubing in stylish matte black. This tubing is - just like Norprene - designed to withstand harsh conditions for a very long period of time, offering a truly exceptional lifespan even under UV, ozone and heat exposure for many years. Unlike most PVC and PUR tubing this high quality EK made EPDM rubber tubing ensures long lasting operation and does not suffer from a plasticizer leaching effect which can cause blockage (gunking) in your liquid cooling loop. This 11,1/16,1mm (ID/OD) tubing also allow for very small bend radius! This may not be the tubing for everyone but it is guaranteed to be hassle-free …

DetailsEK-Quantum Magnitude UNC Standoffs - AM5 Black is a UNC 6-32 standoff pack that enables the use of EK-Quantum Magnitude AMD water blocks on AM5-socket motherboards.

EK-Quantum Vector FE RTX 3090 Ti Backplate - Silver is a CNC machined retention backplate made from silver anodized aluminium for the EK-Quantum Vector FE RTX 3090 Ti - Special Edition water block.The backplate covers the backside of the graphics card's PCB and serves as an aesthetic add-on. It provides additional passive cooling for the GPU core, rear-mounted VRAM and backside of the printed circuit board VRM section. Due to the small size of both the card and the water block, the backplate boasts a ribbed design for additional passive cooling power and touches the active part of the water block for true hybrid cooling.Enclosed:- EK-Quantum Vector FE RTX 3090 Ti Backplate - Silver- Mounting …

Coolant