Computer Cooling EKWB

Installed height: 26mm
The outer diameter: 23mm
Model Number: 3831109849811
It is very sturdy and there are zero movements in the revolvable joint.
Made out of CNC machined brass

EK-Cable Splitter 4-Fan PWM Extended is a 1-to-4 PWM fan splitter which allows the user to connect up to four PWM fans from just one PWM fan header on the motherboard. And because the fans are PWM controlled the RPM of each fan will change depending on the temperature of the CPU and/or motherboard BIOS settings, meaning the RPM and therefore noise will be reduced if the system does not demand high airflow.The extra power required to run four fans from this splitter is provided by the 4-pin molex connector, which does need to be connected if more than one fan is used.If you want your motherboard to control the cooling inside your computer then EK-Cable Splitter 4-Fan PWM Extended could be what …

EK-Quantum Magnitude Accent - sTRX4 Red is an interchangeable inner aesthetic frame for EK's new Magnitude sTRX4 water block. This red accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude sTRX4 CPU water blocks.

With a thickness of 44mm, the EK-Quantum P Series Surface radiators are the absolute all-rounders for low noise and high performance across the entire fan operational range. Equipped with a total of four G1/4“ threaded connection ports, it provides additional versatility during the loop planning process, while the fifth G1/4“ port located on the end-tank is an irreplaceable feature when it comes to draining the loop and air bleeding. A total of sixteen 2mm-wide copper tubes across the entire radiator length assure optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density provide the best balance between thermal transfer …

EK-Quantum Torque Compression Ring 6-Pack STC 16 - Red is a premium locking ring made for the EK-Quantum Torque STC 10/16mm and 12/16mm(ID/OD) series fittings. It is not a stand-alone product, requiring an existing Torque fitting's barb.The locking ring is compressing the tubing wall underneath the ring, and this prevents the flexible tube from being pulled off the barb of the fitting. The grooves on the outside allow for easier hand tightening. The compression ring has cutouts in the EK Quantum signature shape allowing for the colored aesthetic ring to be shown. The colored rings are available in many colors and are screwed onto the fitting before the compression locking ring. The aesthetic …

EK-Quantum Torque Extender Rotary MM 14 is a premium revolvable male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads. Made from nickel-plated CNC machined brass. Sealed with quality EPDM O-rings. EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The Torque family of fittings offers a secure and modular system of connections between …

EK-Quantum Torque Rotary (Adapter Fitting) is a revolvable T adapter fitting with G1/4" threads. In the form of a cut-off cylinder, it is very sturdy and there are zero movements in the revolvable joint. With one male and two female threads, it can be used for setting up drain ports, 90-degree angles or parallel connection between components. This Quantum Line adapter is made out of CNC machined brass with high-quality satin titanium finish while the seal is made by quality rubber O-rings. Satin Titanium Quantum Torque series fittings are intentionally not painted on the inside to reduce the level of possible pollutants in the loop. It is an extremely secure and sturdy piece that will last for …

Replacement outer O-ring gaskets for EK fittings and angled adapters.Package contains 6 pieces of OR 12x2.These fittings are compatible with following fitting lines: EK-HDC 16mm EK-ACF 10/13mm EK-ACF 10/16mm EK-ACF 13/19mm EK-ACF 12/16mm EK-HD Adapter 12/16mm EK-Coolstream extenders EK-ACF 10/16mm

Thermal Paste

Graphics Card Cooler / EK Water Blocks EK-Quantum Vector² / 4 x G1/4" / Contact Surface Nickel-Plated Copper / Display Without

EK-Quantum Lumen 7" LCD - Black is a Quantum series 7-inch IPS screen that is a stylish and functional addition to any liquid cooling setup. The display is recognized as an additional desktop by your OS, offering a handy way of displaying any content you want or monitoring the computer's vital parameters like component and coolant temperatures, fan RPM, core frequency, and more. It is mounted on a standard 120mm fan spacing in the PC case or used as an external display. This monitor uses a high-quality IPS screen designed to be mounted inside the PC case or to be used as an external monitor for temperature, hardware load, and other information or pure aesthetics. It has a wide SVGA resolution …

This socket-specific EK-Quantum Velocity² water block is engineered specifically for AMD® AM5 Socket and Ryzen 7000-series CPUs. It is built upon an award-winning, market-recognized platform that has received the IF Design award, European Hardware Award, CES Innovation award, and several other performance review awards as well. With a revolutionary "clean-front" design, with no visible mounting screws, Velocity² water blocks are on the route to outshining their predecessor and taking over the market lead.The EK-Quantum Velocity² D-RGB - AM5 Full Nickel is a high-performance premium quality CPU water block for the AMD AM5 socket platform. It features a next-generation cooling …

EK-UNI Pump Bracket (140mm FAN) Vertical is a mounting adapter for installation of Xylem D5 powered EK-XTOP Revo D5 and EK-XRES Revo D5 units to any 140mm fan hole pattern application. It can be used for vertical and horizontal position.Compatibility- EK-XRES Revo D5 series (any)- EK-XTOP Revo D5 series (any)- EK-XTOP DDC series (any)Contents:- EK-UNI Pump Bracket (140mm Fan) Vertical- 5x polyamid washer M4 0,8- 5x screws M4x6 DIN7984- 5x nut M4- Allen key 2,5

Equipped with a total of eight G1/4“ threaded connection ports, the EK-Quantum P Series X-Flow Surface radiators allow for an unbeatable combination of versatility and performance within the PC radiator market. With the 44mm thickness, they still provide ample performance across the entire fan operational range, regardless of which crossflow port setup the user chooses. A total of sixteen 2mm wide copper tubes across the whole radiator length enable optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density provide the best balance between thermal transfer and air resistance for optimal performance even at low-speed fan operation.…

This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for ASUS® ROG Strix RTX 3070 graphics cards based on the latest NVIDIA® Ampere™ architecture. An EK water block for ROG STRIX RTX 3070 EK-Quantum Vector Strix RTX 3070 D-RGB water block is compatible with ROG Strix RTX 3070 graphics cards. The Vector water block actively cools the GPU, VRAM (on the front), MOSFETs in the VRM (voltage regulation module), PWM controller, and all chokes including the input rail. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. Additionally, this new design allows …

EK-Quantum Torque Static FF 90° is a 90° adapter fitting with two female G1/4" threads. This adapter allows the connection of two fittings, adapters, or extenders with male G1/4" threads to extend tubing possibilities in your water-cooled system. Often used to avoid bending tubes or make fewer bends by utilizing these adapters as an interconnect. Made of nickel-plated CNC machined brass. Technical specifications: - Threading: G1/4" - Thread length: 4.5mm - Diameter: 23mm - Installed height: 25mm

EK-Quantum Kinetic TBE D5 Body D-RGB are the stand-alone pumpless versions of the newly released tubular style Kinetic TBE combo units. This means the customer is able to upgrade his old EK-XRES Revo D5 unit or to utilize any existing previously owned D5 pump. These combo units are equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.The top now features three G1/4" ports, one of which has a pre-installed nickel-plated brass internal tube which helps to prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and foaming of the co…

EK-Quantum Torque (Adapter Fitting) - Black is a revolvable angled (45°) adapter fitting with G1/4" threads. In the form of a cut-off cylinder, it is very sturdy and there are zero movements in the revolvable joint. This Quantum Line adapter is made out of CNC machined brass with high-quality Satin Black finish while the seal is made by quality rubber O-rings. Black EK-Quantum Torque series fittings are intentionally not painted on the inside to reduce the level of possible pollutants in the loop. It is an extremely secure and sturdy piece that will last for many future builds. The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water …

EK-Cryofuel Loop Superflush is a solution made to flush out manufacturing residues, impurities, and leftover chemicals. It can be used either as a stand-alone solution or after the EK-CryoFuel Loop Cleaner.Stand-alone - prepares a new, unused loop for a new coolant and extends its life, improves stability, and reduces soft tube yellowing.Follow up - after using EK-CryoFuel Loop Cleaner to clean gunk and old coolant, Superflush is used to pick up and rinse any residue chemicals left from the cleaner.The concentrate is to be mixed with approximately 2750ml of distilled water (1:11 ratio). This solution does not act as a corrosive inhibitor or biocide for coolants. Compatible with all EK soft and …

EK-CryoFuel Solid non-transparent coolants are all based on a new patent-pending formula with vivid, long-lasting colour stability. The coolant contains everything a high-end liquid cooling system requires for efficient thermal performance and providing the necessary protection for your water blocks. It carries the essential synergistic corrosion inhibitors and biological inhibitors - thus promoting long and safe operational life for your liquid cooling products and high thermal efficiency.With countless hours of in-house and third-party real-life scenario testing, EK-CryoFuel Solid is the most chemically stable coolant that provides enthusiasts with the best possible level of performance and …