Computer Cooling EKWB

EK-Quantum Torque Rotary Offset 3 - Nickel is a premium revolvable male+female threaded offset adapter fitting. It is commonly used to distance or offset G1/4" ports in tight spaces or to perfectly align hard tubing to another port in order to have aesthetically pleasant parallel tubing. Aesthetically, it is a perfect match with the EK-Quantum Torque series fittings and adapters. Made from nickel-plated CNC machined brass. Sealed with quality EPDM O-rings. These offsets adapter fittings are rotary and they can be rotated around their axis in 360 degrees to fine-tune and find the exact positioning required. Technical data: - Threading: 2 x G1/4" (Male - Female) - Thread length: 4.5mm - Material: …

EK-Quantum Torque Static FF 45 is a 45 adapter fitting with two female G1/4" threads.This adapter allows the connection of two fittings, adapters, or extenders with male G1/4" threads to extend tubing possibilities in your water-cooled system. Often used to avoid bending tubes or make fewer bends by utilizing these adapters as an interconnect.Made of black nickel-plated CNC machined brass.Technical specifications:- Threading: G1/4"- Thread length: 4.5mm- Diameter: 23mm- Installed height: 20.5mm

EK-Quantum Magnitude Accent - Nickel is an interchangeable aesthetic inner frame for EK's new Magnitude water block. This accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation.This Magnitude accent is made of nickel-plated brassAvailable in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude CPU water blocks

EK-Quantum Torque (Adapter Fitting) - Nickel is a revolvable T adapter fitting with G1/4" threads. In the form of a cut-off cylinder, it is very sturdy and there are zero movements in the revolvable joint. With one male and two female threads, it can be used for setting up drain ports, 90-degree angles, or parallel connection between components. This Quantum Line adapter is made out of CNC machined brass with high-quality Nickel finish while the seal is made by quality rubber O-rings. It is an extremely secure and sturdy piece that will last for many future builds. The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water cooled system allowing …

EK-FC Terminal X3 - Plexi is a high-quality parallel interconnection for connecting‚ three (3) EK Full-Cover water blocks in a single, sturdy unit. Connecting multiple full cover water blocks with such a terminal is an easy and straightforward process.The Terminal is made of high-quality Acrylic material. There is no need to purchase additional links or fittings since the EK-FC Terminal is mounted directly to the water block. Serial and parallel water flow is graphically explained in the installation manual.For closing unused ports on either Serial or Parallel terminals, please refer to EK-FC Terminal BLANK Serial or EK-FC Terminal BLANK Parallel based on the type of connection you need to cl…

EK-Quantum Velocity² ILM Replacement - 1700 replaces the motherboard's integrated loading mechanism (ILM) with a frame that bolsters the structural rigidity of the socket, motherboard, and even the CPU. It is used for cooling with regular EK-Quantum Vector² CPU water blocks, not Direct Die models.Due to the shape of the CPU and the way the stock ILM holds the CPU down, Intel 12th and 13th gen CPUs are prone to warping due to uneven pressure. This contact frame prevents any warping or bending of the CPU and the surrounding area, improving the cooling efficiency due to more even pressure applied on the CPU. As a result, the center that contains the CPU’s heat source is no longer …

EK-Quantum Vector² Trio RTX 3080/90 Backplate - Silver is a CNC machined retention backplate made from aluminum with a natural anodized finish, that fits all EK-Quantum Vector² Trio RTX 3080/3090 water blocks. TThe backplate covers the whole length of the graphics card's PCB, serves as an aesthetic add-on, and also provides passive cooling for the backside of the voltage regulation module (VRM) and the GPU core.Enclosed:- EK-Quantum Vector² Trio RTX 3080/90 Backplate - Silver- Mounting mechanism- Thermal padsis Silver finish perfectly complements EK's Satin Titanium products.Compatibility:https://www.ekwb.com/configurator/waterblock/3831109891179

EK-Loop DDC 4.2 PWM Motor is a high-performance water pump with power management control (via PWM - pulse width modulation) of rotation speed through motherboard BIOS or a dedicated fan controller. The main difference to a DDC 3.2 PWM is the black cabling, SATA power connector instead of MOLEX, and 32-bit communication.This pump features 3/8" (10mm) non-removable plastic barbs to support any 10mm ID tubing and is compatible with any EK-Quantum Kinetic TBE DDC, and FLT DDC pump-res combo units. EK highly advises using a Convection heatsink to even further prolong the lifespan of this pump.Despite a remarkably small footprint of 2.4" square, EK-Loop DDC 4.2 PWM features an astounding 5,2m of head …

Replacement tube for EK-RES X3 series reservoirs.Specification:- Length: 354mm- Diamater: 60mm (OD) / 50mm (ID)- Material: acrylic glassCompatibility:May be use to upgrade or replace the tube on any of the following EK products:- EK-RES X3- EK-DCP 4.0 X-RES- EK-DDC X-RES CSQ- EK-D5 X-RES CSQ- EK-D5 Dual TOP G1/4 CSQ in conjuction with EK-D5 X-RES LINK CSQ- EK-Dual DDC X-TOP CSQ in conjuction with EK-Dual DDC X-RES Link CSQCaution: Not compatible with EK-Multioption RES X2 series reservoir.

EK-Quantum Vector FE RTX 3090 Backplate - Silver is a CNC machined retention backplate made from silver anodized aluminum for the EK-Quantum Vector FE RTX 3090 - Special Edition water block.The backplate covers the backside of the graphics card's PCB and serves as an aesthetic add-on. It provides additional passive cooling for the GPU core, rear-mounted VRAM and backside of the printed circuit board VRM section. Due to the small size of both the card and the water block, the backplate boasts a ribbed design for additional passive cooling power and touches the active part of the water block for true hybrid cooling.Enclosed:- EK-Quantum Vector FE RTX 3090 Backplate - Silver- Mounting screws- Thermal …

EK-Quantum Torque Drain Valve - Nickel is a premium fitting acting as a perfect draining point in your system. It features a secure cap, in form of a Torque fitting compression ring, and it can even fit an aesthetic color ring for HDC 16 Torque fittings. The secure-cap does not allow you to accidentally open, or leave open the drain valve This drain valve has an advantage over the traditional ball valves in terms of size. It has a smaller footprint, secure locking, and an easy open/close mechanism that works on a slide. It has a male thread on one end, allowing you to screw it directly into a G1/4" female port on any water cooling component without the use of an adapter fitting as traditional …

Static extender to extend a G1/4" port from a block
Threading: 2 x G1/4" (Male - Female)
Diameter: 23mm
Height: 14mm
Thread length: 4.5mm

Kinetic series pump-reservoir combos are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!All new Flat (FLT) series EK-Quantum Kinetic FLT DDC pump-reservoir units! The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine DDC pump! Each unit is featuring standard 120mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.EK-Quantum Kinetic FLT DDC series pump-reservoir un…

EK-Quantum Torque STC 10/13 fittings are EK's new minimalistic 10/13mm (ID/OD) soft-tube compression fittings designed for use with various flexible soft tubing types such as PVC, EPDM, Norprene, silicone or any other type of compatible flexible tube. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products. The locking ring is compressing the tubing wall underneath the ring, and this prevents the flexible tube from being pulled off the barb of the fitting. The grooves on the outside allow for easier hand tightening.…

EK-Quantum Surface End Tank Plug - Nickel is a nickel-plated brass end-tank plug for the EK-Quantum Surface radiators.Technical specification:- Material: Brass- Thread: G1/4"- Finish: Nickel

EK-Quantum Vector² Strix RTX 3080/90 Backplate - Nickel is a CNC machined retention backplate made from nickel-plated aluminum, that fits all EK-Quantum Vector² Strix RTX 3080/3090 water blocks. The backplate covers the whole length of the graphics card's PCB, serves as an aesthetic add-on, and also provides passive cooling for the backside of the voltage regulation module (VRM) and the GPU core. Enclosed: - EK-Quantum Vector² Strix RTX 3080/90 Backplate - Nickel - Mounting mechanism - Thermal pads Compatibility:https://www.ekwb.com/configurator/waterblock/3831109891384

High-grade non-louvered copper fins with 18 FPI density provide the best balance between thermal transfer and air resistance.
The Quantum Surface line is made to be modular and easily disassembled.
A total of sixteen 2mm wide copper tubes across the entire radiator ensure optimal coolant flow, putting no stress on your cooling loop.

EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0,5mm x 45° chamfer. Specification: - Material: PETG - Inner diameter: 12 mm - Outer diameter: 16 mm - Length: 500 mm (19.5") The package contains 2 pieces of tube only. Please purchase EK-HD Adapter or EK-HDC compression fittings separately! For easier installation we recommend wetting the gasket (O-ring) using drops of water prior to installing solid tube.

With a thickness of only 30mm, the EK-Quantum S Series Surface radiators are ideal for space-constrained cases. Despite the reduced thickness, they deliver exceptional performance at very low and medium fan speeds. A total of 16 copper 2mm wide tubes across the entire length of the radiator assure optimal coolant flow putting no stress on your cooling loop. High-grade non-louvered copper fins with 20 FPI density provide the best balance between thermal transfer and air resistance for optimal performance even at low-speed fan operation. A Push/Pull setup on an S Series EK-Quantum Surface radiator is not something EK would recommend since it will not bring a proportional performance increase. …