Computer Cooling EKWB

Specifications:-- Length: 100 mm- Color: black (sleeved)- Connectors: - 1x 4-pin PWM connector - 2x 4-pin PWM connector- Compatibility: - 4-pin PWM fan - 3-pin fan- EK Water Blocks EK-Cable Y Splitter 2-Fan PWM (10cm)

EK-Quantum Magnitude Accent - sTRX4 Gold is an interchangeable aesthetic inner frame for EK's new Magnitude sTRX4 water block. This gold accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude sTRX4 CPU water blocks.

With a thickness of 44mm, the EK-Quantum P Series Surface radiators are the absolute all-rounders for low noise and high performance across the entire fan operational range. Equipped with a total of four G1/4“ threaded connection ports, it provides additional versatility during the loop planning process, while the fifth G1/4“ port located on the end-tank is an irreplaceable feature when it comes to draining the loop and air bleeding. A total of sixteen 2mm-wide copper tubes across the entire radiator length assure optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density provide the best balance between thermal transfer …

EK-Quantum Torque Compression Ring 6-Pack STC 16 - Green is a premium locking ring made for the EK-Quantum Torque STC 10/16mm and 12/16mm(ID/OD) series fittings. It is not a stand-alone product, requiring an existing Torque fitting's barb.The locking ring is compressing the tubing wall underneath the ring, and this prevents the flexible tube from being pulled off the barb of the fitting. The grooves on the outside allow for easier hand tightening. The compression ring has cutouts in the EK Quantum signature shape allowing for the colored aesthetic ring to be shown. The colored rings are available in many colors and are screwed onto the fitting before the compression locking ring. The aesthetic …

EK-Quantum Torque Extender Static MF 14 is a premium male+female threaded extender. It is commonly used to extend a G1/4" port from a block, radiator or any other liquid-cooling component in order to ease the process of connecting to other components and having fewer bends or inaccessible fittings at tight places.This is not a revolvable extender.Made from CNC machined brass in satin silver finish. Sealed with quality EPDM O-rings. Satin Titanium Quantum Torque series extenders are intentionally not painted on the inside to reduce the level of possible pollutants in the loop.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the …

Water Cooling Accessory / 6 piece / EKWB EK-Quantum Torque / 1 x G1/4"

EK-Quantum Kinetic TBE D5 combo unit is the revolution of the most popular pump-reservoir assembly design on the market. The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine D5 pump! The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.The top features three G1/4" ports, one of which has a pre-installed nickel-plated brass internal tube which helps to prevent the splashing of the coolant inside the reservoir if the top is to be used as an inlet. This reduces the chances of air being sucked in by the pump and fo…

EK ZMT (Zero Maintenance Tubing) is a high quality, zero maintenance, industrial grade EPDM rubber tubing in stylish matte black.This tubing is - just like Norprene - designed to withstand harsh conditions for a very long period of time, offering a truly exceptional lifespan even under UV, ozone and heat exposure for many years.Unlike most PVC and PUR tubing this high quality EK made EPDM rubber tubing ensures long lasting operation and does not suffer from a plasticizer leaching effect which can cause blockage (gunking) in your liquid cooling loop. This 11,1/16,1mm (ID/OD) tubing also allow for very small bend radius!This may not be the tubing for everyone but it is guaranteed to be hassle-free …

EK-Quantum Magnitude UNC Standoffs - AM5 Black is a UNC 6-32 standoff pack that enables the use of EK-Quantum Magnitude AMD water blocks on AM5-socket motherboards.

With a thickness of 44mm, the EK-Quantum P Series Surface radiators are the absolute all-rounders for low noise and high performance across the entire fan operational range. Black Edition Surface radiators are equipped with two G1/4“ threaded connection ports. A total of sixteen 2mm-wide copper tubes across the entire radiator length assure optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density provide the best balance between thermal transfer and air resistance, enabling optimal performance even at low-speed fan operation. To maximize cooling performance, a Push/Pull setup can be utilized on any P Series EK-Quantum Surface …

EK-Quantum Reflection² MEG Prospect 700R D-RGB - Plexi is a water cooling reservoir, routing, and pump solution made to fit award-winning MSI MEG Prospect 700R and 700RL cases. This "distro plate" is specifically designed to provide an advanced water cooling solution with a market-leading D5 pump for users who are building custom loop liquid cooling solutions in these mid-tower gaming cases.Supported MSI MEG cases:- MEG Prospect 700R- MEG Prospect 700RLThe EK-Quantum Reflection² MEG Prospect 700R D-RGB offers multiple industry-standard G1/4" threaded inlets and outlets. The placement of these inlets and outlets is perfectly aligned to fit in line with the PC components in order to …

EK-Quantum Torque Micro Extender Static MM 7 - Black Nickel is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads. This extender is especially useful in situations where the port spacing is too low, or due to clearance issues. This is not a revolvable extender. Made from nickel-plated CNC machined brass. Sealed with quality EPDM O-rings. These static extenders can be either tightened by hand or by using EK-Loop Multi Allen Key / Allen Key 9mm (not included). Technical data: Threading: 2 x G1/4" (Male - Male) Thread length: 4.5mm Diameter: 16.5mm Height: 7mm

For those who demand the most cooling power out of an EK-Quantum Surface radiator, the 58mm-thick X Series is the right choice. These thick radiators will benefit the most from medium and high-speed fans or even a Push/Pull setup. Equipped with a total of four G1/4“ threaded connection ports, the X Series provides additional versatility during the loop planning process. The fifth G1/4“ port located on the end-tank is an irreplaceable feature when it comes to draining the loop and air bleeding. A total of sixteen 2mm wide copper tubes across the entire radiator ensure optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density …

EK-Quantum Torque Rotary Offset 3 - Nickel is a premium revolvable male+female threaded offset adapter fitting. It is commonly used to distance or offset G1/4" ports in tight spaces or to perfectly align hard tubing to another port in order to have aesthetically pleasant parallel tubing. Aesthetically, it is a perfect match with the EK-Quantum Torque series fittings and adapters. Made from nickel-plated CNC machined brass. Sealed with quality EPDM O-rings. These offsets adapter fittings are rotary and they can be rotated around their axis in 360 degrees to fine-tune and find the exact positioning required. Technical data: - Threading: 2 x G1/4" (Male - Female) - Thread length: 4.5mm - Material: …

EK-Quantum Torque Static FF 45 is a 45 adapter fitting with two female G1/4" threads.This adapter allows the connection of two fittings, adapters, or extenders with male G1/4" threads to extend tubing possibilities in your water-cooled system. Often used to avoid bending tubes or make fewer bends by utilizing these adapters as an interconnect.Made of black nickel-plated CNC machined brass.Technical specifications:- Threading: G1/4"- Thread length: 4.5mm- Diameter: 23mm- Installed height: 20.5mm

EK-Quantum Magnitude Accent - Nickel is an interchangeable aesthetic inner frame for EK's new Magnitude water block. This accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation.This Magnitude accent is made of nickel-plated brassAvailable in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude CPU water blocks

EK-Quantum Torque (Adapter Fitting) - Nickel is a revolvable T adapter fitting with G1/4" threads. In the form of a cut-off cylinder, it is very sturdy and there are zero movements in the revolvable joint. With one male and two female threads, it can be used for setting up drain ports, 90-degree angles, or parallel connection between components. This Quantum Line adapter is made out of CNC machined brass with high-quality Nickel finish while the seal is made by quality rubber O-rings. It is an extremely secure and sturdy piece that will last for many future builds. The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water cooled system allowing …

EK-FC Terminal X3 - Plexi is a high-quality parallel interconnection for connecting‚ three (3) EK Full-Cover water blocks in a single, sturdy unit. Connecting multiple full cover water blocks with such a terminal is an easy and straightforward process.The Terminal is made of high-quality Acrylic material. There is no need to purchase additional links or fittings since the EK-FC Terminal is mounted directly to the water block. Serial and parallel water flow is graphically explained in the installation manual.For closing unused ports on either Serial or Parallel terminals, please refer to EK-FC Terminal BLANK Serial or EK-FC Terminal BLANK Parallel based on the type of connection you need to cl…

EK-Quantum Velocity² ILM Replacement - 1700 replaces the motherboard's integrated loading mechanism (ILM) with a frame that bolsters the structural rigidity of the socket, motherboard, and even the CPU. It is used for cooling with regular EK-Quantum Vector² CPU water blocks, not Direct Die models.Due to the shape of the CPU and the way the stock ILM holds the CPU down, Intel 12th and 13th gen CPUs are prone to warping due to uneven pressure. This contact frame prevents any warping or bending of the CPU and the surrounding area, improving the cooling efficiency due to more even pressure applied on the CPU. As a result, the center that contains the CPU’s heat source is no longer …

EK-Quantum Vector² Trio RTX 3080/90 Backplate - Silver is a CNC machined retention backplate made from aluminum with a natural anodized finish, that fits all EK-Quantum Vector² Trio RTX 3080/3090 water blocks. TThe backplate covers the whole length of the graphics card's PCB, serves as an aesthetic add-on, and also provides passive cooling for the backside of the voltage regulation module (VRM) and the GPU core.Enclosed:- EK-Quantum Vector² Trio RTX 3080/90 Backplate - Silver- Mounting mechanism- Thermal padsis Silver finish perfectly complements EK's Satin Titanium products.Compatibility:https://www.ekwb.com/configurator/waterblock/3831109891179