Computer Cooling EKWB

DetailsEK-Quantum Magnitude UNC Standoffs - AM5 Black is a UNC 6-32 standoff pack that enables the use of EK-Quantum Magnitude AMD water blocks on AM5-socket motherboards.

The EK-AIO LGA1700 Upgrade Kit includes everything you need to mount your EK-AIO onto the motherboard with an LGA 1700 socket, making it compatible with the latest Intel® Alder Lake processors. The installation process is simple and easy with just two steps. First, mount the new backplate and then re-apply the thermal paste. Detailed information about the installation process can be found below, in the attached PDF file containing the installation manual. The following closed-loop CPU coolers are compatible with the new Intel LGA1700 socket using the EK-AIO LGA1700 Upgrade kit: - EK-AIO Basic 240 - EK-AIO Basic 360 - EK-AIO 120 D-RGB - EK-AIO 240 D-RGB - EK-AIO 280 D-RGB - EK-AIO 360 D-RGB …

EK-Quantum Vector² RE RTX 3080/90 Backplate - Silver is a CNC machined retention backplate made from aluminum with a natural anodized finish, that fits all EK-Quantum Vector² RE RTX 3080/3090 water blocks. This Silver finish perfectly complements EK's Satin Titanium products. The backplate covers the whole length of the graphics card's PCB, serves as an aesthetic add-on, and also provides passive cooling for the backside of the voltage regulation module (VRM) and the GPU core. Enclosed: - EK-Quantum Vector² RE RTX 3080/90 Backplate - Silver - Mounting mechanism - Thermal pads Compatibility: https://www.ekwb.com/configurator/waterblock/3831109858868

EK-Quantum Torque Micro Extender Static MM 7 - Black Nickel is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads. This extender is especially useful in situations where the port spacing is too low, or due to clearance issues. This is not a revolvable extender. Made from nickel-plated CNC machined brass. Sealed with quality EPDM O-rings. These static extenders can be either tightened by hand or by using EK-Loop Multi Allen Key / Allen Key 9mm (not included). Technical data: Threading: 2 x G1/4" (Male - Male) Thread length: 4.5mm Diameter: 16.5mm Height: 7mm

For those who demand the most cooling power out of an EK-Quantum Surface radiator, the 58mm-thick X Series is the right choice. These thick radiators will benefit the most from medium and high-speed fans or even a Push/Pull setup. Equipped with a total of four G1/4“ threaded connection ports, the X Series provides additional versatility during the loop planning process. The fifth G1/4“ port located on the end-tank is an irreplaceable feature when it comes to draining the loop and air bleeding. A total of sixteen 2mm wide copper tubes across the entire radiator ensure optimal coolant flow, putting no stress on your cooling loop. High-grade non-louvered copper fins with 18 FPI density …

EK-Quantum Torque Rotary Offset 3 - Nickel is a premium revolvable male+female threaded offset adapter fitting. It is commonly used to distance or offset G1/4" ports in tight spaces or to perfectly align hard tubing to another port in order to have aesthetically pleasant parallel tubing. Aesthetically, it is a perfect match with the EK-Quantum Torque series fittings and adapters. Made from nickel-plated CNC machined brass. Sealed with quality EPDM O-rings. These offsets adapter fittings are rotary and they can be rotated around their axis in 360 degrees to fine-tune and find the exact positioning required. Technical data: - Threading: 2 x G1/4" (Male - Female) - Thread length: 4.5mm - Material: …

EK-Quantum Torque Static FF 45 is a 45 adapter fitting with two female G1/4" threads.This adapter allows the connection of two fittings, adapters, or extenders with male G1/4" threads to extend tubing possibilities in your water-cooled system. Often used to avoid bending tubes or make fewer bends by utilizing these adapters as an interconnect.Made of black nickel-plated CNC machined brass.Technical specifications:- Threading: G1/4"- Thread length: 4.5mm- Diameter: 23mm- Installed height: 20.5mm

EK-Quantum Magnitude Accent - Nickel is an interchangeable aesthetic inner frame for EK's new Magnitude water block. This accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation.This Magnitude accent is made of nickel-plated brassAvailable in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude CPU water blocks

EK-Quantum Torque (Adapter Fitting) - Nickel is a revolvable T adapter fitting with G1/4" threads. In the form of a cut-off cylinder, it is very sturdy and there are zero movements in the revolvable joint. With one male and two female threads, it can be used for setting up drain ports, 90-degree angles, or parallel connection between components. This Quantum Line adapter is made out of CNC machined brass with high-quality Nickel finish while the seal is made by quality rubber O-rings. It is an extremely secure and sturdy piece that will last for many future builds. The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water cooled system allowing …

EK-FC Terminal X3 - Plexi is a high-quality parallel interconnection for connecting‚ three (3) EK Full-Cover water blocks in a single, sturdy unit. Connecting multiple full cover water blocks with such a terminal is an easy and straightforward process.The Terminal is made of high-quality Acrylic material. There is no need to purchase additional links or fittings since the EK-FC Terminal is mounted directly to the water block. Serial and parallel water flow is graphically explained in the installation manual.For closing unused ports on either Serial or Parallel terminals, please refer to EK-FC Terminal BLANK Serial or EK-FC Terminal BLANK Parallel based on the type of connection you need to cl…

EK-CryoFuel Solid non-transparent coolants are all based on a new patent-pending formula with vivid, long-lasting colour stability. The coolant contains everything a high-end liquid cooling system requires for efficient thermal performance and providing the necessary protection for your water blocks. It carries the essential synergistic corrosion inhibitors and biological inhibitors - thus promoting long and safe operational life for your liquid cooling products and high thermal efficiency.With countless hours of in-house and third-party real-life scenario testing, EK-CryoFuel Solid is the most chemically stable coolant that provides enthusiasts with the best possible level of performance and …

EK-Loop DDC 4.2 PWM Motor is a high-performance water pump with power management control (via PWM - pulse width modulation) of rotation speed through motherboard BIOS or a dedicated fan controller. The main difference to a DDC 3.2 PWM is the black cabling, SATA power connector instead of MOLEX, and 32-bit communication.This pump features 3/8" (10mm) non-removable plastic barbs to support any 10mm ID tubing and is compatible with any EK-Quantum Kinetic TBE DDC, and FLT DDC pump-res combo units. EK highly advises using a Convection heatsink to even further prolong the lifespan of this pump.Despite a remarkably small footprint of 2.4" square, EK-Loop DDC 4.2 PWM features an astounding 5,2m of head …

Replacement tube for EK-RES X3 series reservoirs.Specification:- Length: 354mm- Diamater: 60mm (OD) / 50mm (ID)- Material: acrylic glassCompatibility:May be use to upgrade or replace the tube on any of the following EK products:- EK-RES X3- EK-DCP 4.0 X-RES- EK-DDC X-RES CSQ- EK-D5 X-RES CSQ- EK-D5 Dual TOP G1/4 CSQ in conjuction with EK-D5 X-RES LINK CSQ- EK-Dual DDC X-TOP CSQ in conjuction with EK-Dual DDC X-RES Link CSQCaution: Not compatible with EK-Multioption RES X2 series reservoir.

EK-Quantum Vector FE RTX 3090 Backplate - Silver is a CNC machined retention backplate made from silver anodized aluminum for the EK-Quantum Vector FE RTX 3090 - Special Edition water block.The backplate covers the backside of the graphics card's PCB and serves as an aesthetic add-on. It provides additional passive cooling for the GPU core, rear-mounted VRAM and backside of the printed circuit board VRM section. Due to the small size of both the card and the water block, the backplate boasts a ribbed design for additional passive cooling power and touches the active part of the water block for true hybrid cooling.Enclosed:- EK-Quantum Vector FE RTX 3090 Backplate - Silver- Mounting screws- Thermal …

EK-Quantum Torque Drain Valve - Nickel is a premium fitting acting as a perfect draining point in your system. It features a secure cap, in form of a Torque fitting compression ring, and it can even fit an aesthetic color ring for HDC 16 Torque fittings. The secure-cap does not allow you to accidentally open, or leave open the drain valve This drain valve has an advantage over the traditional ball valves in terms of size. It has a smaller footprint, secure locking, and an easy open/close mechanism that works on a slide. It has a male thread on one end, allowing you to screw it directly into a G1/4" female port on any water cooling component without the use of an adapter fitting as traditional …

Static extender to extend a G1/4" port from a block
Threading: 2 x G1/4" (Male - Female)
Diameter: 23mm
Height: 14mm
Thread length: 4.5mm

Kinetic series pump-reservoir combos are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!All new Flat (FLT) series EK-Quantum Kinetic FLT DDC pump-reservoir units! The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine DDC pump! Each unit is featuring standard 120mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.EK-Quantum Kinetic FLT DDC series pump-reservoir un…

EK-Quantum Torque STC 10/13 fittings are EK's new minimalistic 10/13mm (ID/OD) soft-tube compression fittings designed for use with various flexible soft tubing types such as PVC, EPDM, Norprene, silicone or any other type of compatible flexible tube. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products. The locking ring is compressing the tubing wall underneath the ring, and this prevents the flexible tube from being pulled off the barb of the fitting. The grooves on the outside allow for easier hand tightening.…