Computer Cooling EKWB

HDD Cooler / 2 x G1/4"

Watercooling Hard Tube

EK-Loop D5 MX PWM Motor is a low-power version of the full D5 water pump with PWM speed control via the motherboard or a dedicated fan/pump controller. Compared to the full-power D5 G3, it has a 20% lower flow rate and a weaker head pressure. It uses less power, with only a 15W power draw. Also, power is drawn via Molex connector compared to the SATA on the G3. EK-Loop D5 MX PWM is an original Xylem D5 PWM pump, with a reduced power draw. PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper-quiet operation in idle mode! This pump is ideal for PC and other electronics water cooling. The D5 pump is equipped with an electronically …

EK-Quantum Velocity² ILM Replacement - 1700 replaces the motherboard's integrated loading mechanism (ILM) with a frame that bolsters the structural rigidity of the socket, motherboard, and even the CPU. It is used for cooling with regular EK-Quantum Vector² CPU water blocks, not Direct Die models.Due to the shape of the CPU and the way the stock ILM holds the CPU down, Intel 12th and 13th gen CPUs are prone to warping due to uneven pressure. This contact frame prevents any warping or bending of the CPU and the surrounding area, improving the cooling efficiency due to more even pressure applied on the CPU. As a result, the center that contains the CPU’s heat source is no longer …

The EK-RES X3 150 D-RGB is an upgraded version of the EK-RES X3 versatile multiport standalone reservoir that now features rich D-RGB lighting. The number of inlet/outlet port configuration options on these reservoirs and the simple but effective mounting kit make the loop building with this reservoir a straightforward process.EK-RES X3 series reservoirs are cylindrical standalone solutions, manufactured from premium quality 60mm acrylic tube and POM Acetal end caps in black color. An airtight sealing is ensured by quality EPDM rubber washers at both ends of the reservoir. With a total of six G1/4" ports, the EK-RES X3 150 RGB reservoir makes the filling, tube routing and draining, an easy task.…

Volume series reservoirs are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!All new Flat (FLT) series EK-Quantum Volume FLT reservoir units! The new Volume reservoirs are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation. Each reservoir is featuring standard 120mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of four G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.EK-Quantum Volume FLT reservoirs are available in three different sizes, 120mm, 240mm, a…

EK-Loop DDC 4.2 PWM Motor is a high-performance water pump with power management control (via PWM - pulse width modulation) of rotation speed through motherboard BIOS or a dedicated fan controller. The main difference to a DDC 3.2 PWM is the black cabling, SATA power connector instead of MOLEX, and 32-bit communication.This pump features 3/8" (10mm) non-removable plastic barbs to support any 10mm ID tubing and is compatible with any EK-Quantum Kinetic TBE DDC, and FLT DDC pump-res combo units. EK highly advises using a Convection heatsink to even further prolong the lifespan of this pump.Despite a remarkably small footprint of 2.4" square, EK-Loop DDC 4.2 PWM features an astounding 5,2m of head …

EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 12/16mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems. It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage. Technical data Material: Extruded acrylic Inner diameter: 12 mm Outer …

EK-Quantum Velocity² IHS Removal Tool - 1700 is a delidding or IHS removal tool. It allows users to remove the Integrated Heat Spreader (IHS) from their CPUs and directly cool the CPU die. It is a safe, easy, quick, and ultimately practical way of removing the IHS. While the IHS and CPU Die look flat to the human eye, the surface is actually very uneven.Thermal compounds are used to fill the gaps between the CPU and IHS surfaces. But even with high-quality thermal compounds and even solder, it still accounts for an additional layer before reaching the cooler, resulting in reduced cooling efficiency. Additionally, the silicone adhesive that “glues” the IHS to the CPU can …

EK-Quantum Inertia D5 Body D-RGB is a high-performance standalone pump-top, engineered for the market-proven Genuine D5 water pumps. It comes with an advanced vibration-reducing mounting clamp while offering increased hydraulic performance (up to 15%) compared to the original factory top. This pump-top comes with a pre-installed 3-pin 5V D-RGB LED strip for sophisticated illumination. This pump features a single inlet (on the top) and a single outlet port (on the side) for the installation of two standard G1/4 threaded fittings/barbs. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin addressable LED connector …

The EK-RES X3 250 D-RGB is an upgraded version of the EK-RES X3 versatile multiport standalone reservoir that now features rich D-RGB lighting. The number of inlet/outlet port configuration options on these reservoirs and the simple but effective mounting kit make the loop building with this reservoir a straightforward process.EK-RES X3 series reservoirs are cylindrical standalone solutions, manufactured from premium quality 60mm acrylic tube and POM Acetal end caps in black color. An airtight sealing is ensured by quality EPDM rubber washers at both ends of the reservoir. With a total of six G1/4" ports, the EK-RES X3 250 RGB reservoir makes the filling, tube routing and draining, an easy task.…

EK-Quantum Inertia D5 Body D-RGB is a high-performance standalone pump-top, engineered for the market-proven Genuine D5 water pumps. It comes with an advanced vibration-reducing mounting clamp while offering increased hydraulic performance (up to 15%) compared to the original factory top. This pump-top comes with a pre-installed 3-pin 5V D-RGB LED strip for sophisticated illumination. This pump features a single inlet (on the top) and a single outlet port (on the side) for the installation of two standard G1/4 threaded fittings/barbs.This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin addressable LED connector …

This product can only be installed with EK-Quantum Vector² Trio RTX 3080/90 D-RGB - Nickel + AcetalEK-Quantum Vector² Trio RTX 3080/3090 ABP D-RGB - Nickel + Acetal is an Active Backplate addon for the EK-Quantum Vector² Trio RTX 3080/3090 D-RGB - Nickel + Acetal GPU water block. It is made to actively cool the backside of MSI Trio and Suprim GeForce RTX™ 3080, 3080 Ti, and 3090 GPUs. As with the water block, when upgraded with an active backplate, the entire enclosure stays fully EK-Matrix7 compliant on every axis. This ensures ease of integration and alignment with all other EK-Matrix7 products.EK-Quantum Vector² Trio RTX 3080/3090 Active BackplateThe EK-Quantum Vector² Trio RTX 3080/3090 ABP com…

CPU Cooler