Microphones

Biamp NPX G1040 Black Conference microphone

MPA-102 1-channel low-noise microphone preamplifier for mains operation or battery operation. 1 microphone input, XLR, bal. Gain, 11 steps 20-70dB LED green/red for operation/peak Phantom power +24V, can be switched on additionally Switchable microphone phase Lo cut 100Hz, hi cut 12kHz, 12dB/oct., switchable 1 preamplifier output 1 stereo line input 1 stereo line output Level control and panorama control for mixing the microphone signal to the stereo line channel tools4music 02/2011 "A high-quality preamplifier." Technical Specification Frequency range 20-20,000Hz Input sensitivity 0.3-150mV, switchable Input impedance Mic 2.2kΩ Stereo line 10kΩ Outputs Line, bal. 1V/100Ω,…

Neckband Mic + Beltpack for QRPA & QXPANeckband microphone with beltpack transmitter as alternative or replacement for qtx portable PA units. Available in VHF for QRPA and QXPA or UHF for QXPA-plus.DetailsBatteries 2 x AA (alkaline)Dimensions 150 x 120 x 40mmWeight 97g (no battery)Connection Threaded 3.5mm mono jackPhantom power 3V

Headset for QR+QXPA - VHF 174.1MHz
Neckband microphone with beltpack transmitter as alternative or replacement for qtx portable PA units. Available in VHF for QRPA and QXPA or UHF for QXPA-plus.
VHF models for use with QRPA and QXPA
UHF models for use with QXPA-plus and PAV8
Beltpack transmitters compatible with Chord neckband and lavalier microphones
Carrier frequency - 174.1MHz

SQR 60CM LSPKR

The Gravity MS TBA 01 Desk Mounted Microphone Arm makes creating content easy. Just clamp it to your desk screw on your microphone and easily configure it to the perfect position. This is made possible by the arms dynamic range of movement combined with the four 90° rotation options for the microphone. Youll find that whatever surface you clamp it to the MS TBA 01 stays secure and does its job. It is built from study aluminium with a integrated cable guide to keep everything neat. For speedy but precise positioning of your microphone at home look no further than this microphone arm from Gravity.

Wide range of features
Durable construction
Consistent performance

Microphone Holder for Guitar Cabinets. Features: The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed edges. The rigid boom is finely adjustable in both boom angle and microphone depth – this ensures a far more precise and secure mic placement as opposed to using a gooseneck-based clamping system or conventional mic stand. Material: aluminium. Clamping width: 300 - 400 mm. Extension length: 250 mm. Threaded connector: 3/8''. Weight: 0,6 kg.
Made in: China
Weight: 600 g

This 80 cm boom arm features a cast aluminium hub with precision 2-point tilt and position adjustment and 3/8" male thread. The ergonomic set screw knobs are made from high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation.
Made in: Germany

Take centre stage and stand with confidence. The Gravity GMS5311B Traveller Microphone Stand is an essential tool for any serious vocalist. No matter what your height the extendable boom arm lets your position like a pro. Whats more the fully collapsible design makes storage and transport easy even when space is a premium. Knocks and drops are no match for the durable construction and the sturdy tripod base keeps everything stable. All you have to do is step into the spotlight.

The Gravity GMS43 is a premium-quality microphone stand for vocal performers. The tripod base provides you with sturdy gripping on both flat and uneven surfaces. The GMS43 stand features a durable clutch with a soft touch and a non-slip coating guaranteeing reliable and comfortable operation. The Gravity microphone stands are capable of withstanding frequent gigs travelling and everything in between.

The Gravity MS4322HDB is a premium-quality microphone stand with several features which set it apart from others in its class. Every adjustment point on the Gravity MS4322HDB is crafted to be very ergonomic and provide as comfortable an experience as possible. The adjustment knobs have a soft touch thermoplastic coating giving them excellent grip whilst the clutch on the boom makes using the telescopic part of the arm easy even the locking nut is a long tooled nut meaning you can use more of your hand to adjust it offering a far more comfortable experience than a standard mic stand. The die cast zinc hub and sturdy folding legs are strong enough to withstand the rigours of the road and can even …

The MS 4322 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces. The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4322 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation,…

The Gravity GMS4321B is a premium-quality microphone stand perfect for performers. The zinc die-cast base with folding legs and 2-point adjustment offers a convenient and simple setup. The sturdy tripod base ensures excellent stability on both flat and tilted ground. With a maximum height of 169cm the GMS4321B features a durable clutch and an ergonomic handle made from ABS with a soft touch and non-slip coating guaranteeing reliable and comfortable operation. The Gravity microphone stand is capable of withstanding even the most vigorous touring schedule plus everything in between.

The MS 4221 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces. The boom hub features precision 2-point tilt and position adjustment of the 50 cm boom arm. For easy height adjustment the MS 4221 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment. A set of black …

Ideal for bass drum micing, the GMS 3122 HDB is a premium quality microphone stand with thick walled tubing, powder coated finish and 32 cm height. The heavy duty tripod base is made of die cast zinc with ultra strong folding legs of steel and hefty rubber caps for surface protection. The boom hub features precision 2-point tilt and position adjustment of the telescoping arm. A quick fastener allows for easily variable extension to a maximum length of 88 cm, and the custom designed retainer requires no tools for quick and secure mic clip attachment. A set of black coding rings is included with the GMS 3122 HDB, additional ring packs are available in a wide array of colors for instant personalization.…

The Gravity GMS2322B is a premium-quality microphone stand for both vocalists and musicians. The round base ensures excellent stability and the telescoping boom arm allows an increased length whilst remaining portable. The GMS2322B stand features a durable clutch with a soft touch and a non-slip coating guaranteeing reliable and comfortable operation. The Gravity microphone stands are capable of withstanding frequent gigs travelling and everything in between.

Microphone floor stand with movable boom (adjustable length: 41-60cm) and shock-absorbing folding feet. Thread: 9mm ( 3/8 "). Mat black lacquered Adjustable height: 56-100cm Storage dimensions: 10x56cm Weight: 2.1kg

Monacor MS-15 desk-mount swivel arm microphone stand
Made in: China

Shock-absorbing desktop microphone stand/floor stand with black lacquered finish, variable boom arm and adjustable height. Adjustable height: 36,5-55 cm, Length boom: 37.5 cm, Thread: 16 mm (⅝'') and 9 mm (⅜''), Weight: 2.5 kg
Made in: China

1-channel microphone preamplifier, with switchable phantom power. Features: 1 microphone input, XLR, bal. or 6.3mm jack, unbal. Adjustable gain, up to a max. of 50dB (bal.) or 44dB (unbal.) Clip LED 30V phantom power, can be switched on additionally Technical Specifications: Frequency range 10-30,000Hz Input sensitivity 3.5mV (bal.)/16mV (unbal.), XLR/jack� Input impedance 10kΩ Output voltage 1V Gain 50dB (bal.)/44dB (unbal.) S/N ratio 58dB THD 0.1% Admiss. ambient temp. 0-40 °C Power supply via suppl. plug-in PSU Dimensions (WxHxD) 113x92x40mm Weight 345g Inputs 1 x XLR 1 x 6.3mm jack Outputs 1 x XLR 1 x 6.3mm jack

Phantom Power Adapter with integrated switchable bass roll-off switch. Cable adapter is compatibile with C519, C518 and C516 models from the L-Type Series and all models from 500X series. Legth: 50 cm. Color: Black
Length: 50 cm
~ Length: 0,5 m;1 m
Colour: Black
Made in: China
Type-B Connector: Other
Type-A Connector: XLR Male

Miniature universal audio mixer with 8 mono channels, switchable mic/line. Selection of 4 stereo channels. 2 output level controls, 2 peak LEDs. Supplied without battery. Mic input: 5 mV, 8 x 6.3 mm jack. Line input: 50 mV, 8 x 6.3 mm jack. Master output: 100 mV, 2 x 6.3 mm jack. Frequency range: 20 - 20,000 Hz. S/N ratio: 55 dB. Power supply: 9 V battery or via optional power supply PSS-600E. Dimensions: 150 x 68 x 115 mm. Weight: 550 g. Colour: Black
UK/EU Power supply included: No
Rackmountable: No
Built-in Effects: No
Battery Operation: No
Power Supply: 240V
Made in: China
Number of Channels: 8
Stereo Inputs: 4
Microphone Input: 8