Computer Cooling Kolink

The Kolink 1-4 PWM Fan Splitter Cable is a 1-to-4 PWM fan splitter, which allows the user to connect up to four PWM fans from just one PWM fan header on the motherboard. Because the fans are PWM controlled the RPM of each fan will change depending on the temperature of the CPU and/or motherboard BIOS settings, meaning the RPM and therefore noise will be reduced if the system does not demand high airflow. The extra power required to run four fans from this splitter is provided by the SATA male connector, which does need to be connected if more than one fan is used.

Specifications: - Fan Quantity: 2 LED Fans- Fan Dimensions: 140 x 15 mm- Fan Speed: 1000+-10% RPM- Current: 0.44A- Voltage: 5V- Compatibility: 15.6´´- Dimensions: 360 x 280 x 27mm

The Kolink Inspire L2 RGB Controller allows you to control multiple RGB devices, with multiple connectors to suit most RGB products. The L2 RGB Controller is SATA powered, and has connectors for 12V 4-Pin RGB devices, alongside Phanteks RGB and Corsair RGB connectors too. Over 300 colour settings and modes are possible using the supplied RF remote. Brightness can be adjusted, and settings can be saved for future use. With support for a combined 120 LED's worth of RGB devices, the Kolink Inspire L2 RGB is an excellent low cost solution to your RGB control needs. Specifications Dimensions: 360mm x 13mm (L x W) Weight: 35g Colour: Black Connections: Input: 1x SATA (power) Output: …

The Kolink 1-3 PWM Braided Splitter Cable is an excellent means of adding more PWM fan support to your motherboard. With copper wiring for stable performance and braided sleeving for enhanced durability, this cable is a fine addition to your cooling solution connectivity system. Kolink 1-3 PWM Braided Splitter Cable at a Glance: PWM splitter cable with three 4-pin male connectors Female PWM connector to plug into motherboard Braided PVC braiding for enhanced durability Copper wiring for stable performance Easy cable management Black finish for seamless integration Extended PWM Support Add extra PWM device support to your gaming PC with the …

Extend the range of any fan inside the enclosure with the extension cable extension provided here. The cable extends the signal path by more than 30 cm. It is compatible with 4-pin PWM fans, so it passes the pulse width modulation signal from the motherboard to the fan. In addition, you can also plug in normal 3-pin fans, which then run unregulated.

THE FEATURES OF KOLINK UMBRA 120MM PWM AT A GLANCE: 120mm white 9-bladed ARGB PWM fan with a curved design 12 LEDs on the inside and 9 LEDs outside of the fan for rich colours ARGB 3-pin 5V compatible with Asus Aura Sync for full lighting control Adjustable speed controls via a Daisy Chain PWM connector Hydraulic bearing to further maintain reliable performance Anti-vibration pads to ensure quiet operation STYLISH LIGHTING & COOLING Armed with 12 LEDs on inside and 9 LEDs outside of the fan, the Kolink Umbra delivers jaw-dropping lighting displays along with impressive cooling performance. Courtesy of the 3-pin 5V header, this 120mm fan is compatible with software like Asus Aura Sync to provide …

Bring powerful cooling and style to your gaming PC with the Kolink Umbra X ARGB/PWM 120mm Fan. At 28mm thick, this fan’s design has been optimised to provide outstanding thermal performance and is built from premium components to ensure longevity. Naturally, the ARGB lighting with dual infinity mirror effects is what will make this fan the star of your gaming PC. Kolink Umbra X ARGB PWM 120mm Fan Single Pack at a Glance: Single pack 120mm fan with ARGB lighting 28mm thick to enhance performance Hydraulic bearing for heightened durability Infinity mirror effect lighting Adjustable speed between 600 and 1600RPM Maximum noise level of 24dBA Hi…

Kolink has cultivated a reputation for producing high-quality products at affordable prices. Part of an exciting new line of accessories, the L1-3EXT-50 is a 50cm 3-Pin extension cable that connects directly to a compatible 3-Pin 5V ARGB motherboard header.This cable enables you to more easily connect compatible ARGB components to your PC's motherboard - allowing for greater interior customisation and illumination options.Specification:Length: 50cmConnector: 3-Pin 5V ARGB male to female

Boost your cooling performance and aesthetics with the Kolink Umbra Void AIO Performance CPU Cooler. Designed to work with both AMD and Intel sockets, this AIO water cooler features a highly efficient water pump, premium build materials, and a Kolink Umbra Void SP ARGB PWM fan. Together, these components effectively draw heat away from your CPU whilst the integrated mirror effect lighting illuminates your gaming PC.KOLINK UMBRA VOID 120 AIO PERFORMANCE CPU WATER COOLER AT A GLANCE:AIO CPU cooler designed to work with both Intel and AMD socketsPre-installed Kolink Umbra Void SP 120mm ARGB PWM fan with Zero RPM modeAluminium radiator with high fin density and purity black coatingFlexible rubber …

Bring style and efficient cooling to your gaming PC with the Kolink Umbra Void ARGB PWM 120mm Fan. With a hydraulic bearing and optimised fan blade design, this fan provides improved thermal performance over its predecessors. Plus, the ARGB lighting with dual infinity mirror effects makes each fan a work of art within your PC case. Kolink Umbra Void Pro ARGB PWM 120mm Fan at a Glance: 120mm case fan with 25mm thickness PWM speed control between 800 and 1800RPM Dual infinity mirror effects for the ARGB lighting Maximum 2.1mmH2O static pressure and 57.2CFM airflow Whisper quiet performance typically at 19.4dBA (30dBA max) Hydraulic bearing for great component longevity …

The Kolink 1-3 PWM Fan Splitter Cable is a 1-to-3 PWM fan splitter, which allows the user to connect up to three PWM fans from just one PWM fan header on the motherboard. Because the fans are PWM controlled the RPM of each fan will change depending on the temperature of the CPU and/or motherboard BIOS settings, meaning the RPM and therefore noise will be reduced if the system does not demand high airflow.

Boost your cooling performance and aesthetics with the Kolink Umbra Void AIO Performance CPU Cooler. Designed to work with both AMD and Intel sockets, this AIO water cooler features a highly efficient water pump, premium build materials, and Kolink Umbra Void SP ARGB PWM fans. Together, these components effectively draw heat away from your CPU whilst the integrated mirror effect lighting illuminates your gaming PC.KOLINK UMBRA VOID 360 AIO PERFORMANCE CPU WATER COOLER AT A GLANCE:AIO CPU cooler designed to work with both Intel and AMD socketsPre-installed Kolink Umbra Void SP 120mm ARGB PWM fans with Zero RPM modeAluminium radiator with high fin density and purity black coatingFlexible rubber …

The Kolink Inspire L1 ARGB Controller allows you to control multiple ARGB devices, with multiple connectors to suit most addressable RGB products. The L1 ARGB Controller is SATA powered, and has connectors for 5V 3-Pin ARGB devices, alongside Phanteks DRGB and Corsair ARGB connectors too. Over 300 colour settings and modes are possible using the supplied RF remote. Brightness can be adjusted, and settings can be saved for future use.With support for a combined 120 LED's worth of ARGB devices, the Kolink Inspire L1 ARGB is an excellent low cost solution to your addressable RGB control needs.SPECIFICATION:Dimensions: 360mm x 13mm (L x W)Weight: 35gColour: BlackConnections:Input: 1x SATA (power)Output: …

Extend the range of any fan inside the enclosure with the extension cable extension provided here. The cable extends the signal path by more than 30 cm. It is compatible with 4-pin PWM fans, so it passes the pulse width modulation signal from the motherboard to the fan. In addition, you can also plug in normal 3-pin fans, which then run unregulated.

The Kolink 1-2 PWM Braided Splitter Cable is an excellent means of adding more PWM fan support to your motherboard. With copper wiring for stable performance and braided sleeving for enhanced durability, this cable is a fine addition to your cooling solution connectivity system. Kolink 1-2 PWM Braided Splitter Cable at a Glance: PWM splitter cable with two 4-pin male connectors Female PWM connector to plug into motherboard Braided PVC braiding for enhanced durability Copper wiring for stable performance Easy cable management Black finish for seamless integration Extended PWM Support Add extra PWM device support to your gaming PC with the …

THE FEATURES OF KOLINK UMBRA VOID 120MM PWM AT A GLANCE: 120mm white 9-bladed ARGB PWM fan with a curved design 12 LEDs each on the inside and outside of the fan for rich colours ARGB 3-pin 5V compatible with Asus Aura Sync for full lighting control Adjustable speed controls via a Daisy Chain PWM connector Infinity Mirror Effect for an endless reflective lighting display Hydraulic bearing to further maintain reliable performance Anti-vibration pads to ensure quiet operation STYLISH LIGHTING & COOLING Armed with 12 LEDs both on inside and outside of the fan, the Kolink Umbra Void delivers jaw-dropping lighting displays along with impressive cooling performance. Courtesy of the 3-pin 5V header,…

The Kolink 1-4 PWM Braided Splitter Cable is an excellent means of adding more PWM fan support to your motherboard. With copper wiring for stable performance and braided sleeving for enhanced durability, this cable is a fine addition to your cooling solution connectivity system. Kolink 1-4 PWM Braided Splitter Cable at a Glance: PWM splitter cable with four 4-pin male connectors Female PWM connector to plug into motherboard Includes a SATA connector for additional power delivery Braided PVC braiding for enhanced durability Copper wiring for stable performance Easy cable management Black finish for seamless integration Extended PWM Support …

Prepared for the next heat wave: The strong Aero USB Desk Fan by Kolink provides cooling exactly where it is most needed. The fight to keep cool is no longer a losing battle when you have the Kolink Aero placed anywhere on your desk. Turn the ventilation grille so that the air flow is directed exactly where it should and you will be kept nice and cool at all times. The features of the Aero USB Desk Fan from Kolink at a glance: - Portable USB desktop fan - Powered by 1.2 meter USB cable - Rotatable ventilation grille for optimally placed airflow - Brushless motor with three speed levels - Compact dimensions of 125 x 57 x 135 mm Optimal cooling thanks to powerful motor The powerful and quiet brushless …

Add style to your cooling with the sleek Kolink Classic 120mm PWM fan. THE FEATURES OF KOLINK CLASSIC 120MM PWM FAN AT A GLANCE: 120mm black 7-bladed PWM fan Adjustable speed controls via a female PWM connector Hydraulic bearing to further maintain reliable performance PWM connector for adjustable speed controls STYLISH COOLING Complemented by its chic design, the Kolink Classic 120mm fan is capable of speeds of up to 1500 RPM, along with an airflow of 52.15CFM. What’s more, using the female PWM connector, can also link up with adjustable speed controls. So, depending on the task at hand, you can adjust your fan speed to how you like. BUILT TO LAST In conjunction with its fantastic features,…

Specifications: - Fan diameter: 120mm- Bearing: FDB- Lighting: ARGB- Speed: 1,600rpm- Noise: max 24dB(A)- Air flow: 61 CFM- Static pressure: 2.46 mmH 2 OVoltage: - 5 V (LED)- 12 V (Fan)Connector: - ARGB: 3-Pin- Fan: 4-Pin PWM- Dimensions: 120 x 120 x 28mm- Materials: Plastic/Rubber

Kolink has cultivated a reputation for producing high-quality products at affordable prices. Part of an exciting new line of accessories, the KL-PWM-2 is a 4-Pin PWM Fan Header Splitter cable.It features a Female connector that can be easily attached to a standard 4-Pin motherboard header. Additionally, 2 male connectors enable you to power compatible PWM fans. At 35cm in length, this splitter enables you to set up your air cooling system the way they want.Specification:Length: 35cmConnector: x1 4-Pin female connector x2 male connectors