Sealants & Adhesives Loctite

577 is a thread sealant that is designed for the locking and sealing of metal pipes and fittings, as well as other threaded assemblies. The sealant works by filling the space between threaded parts an more→d seals whilst locking at the same time. Features and Benefits Provides an instant, low-pressure seal for metal pipes and fittings Will not creep, shrink or shred and has excellent chemical and thermal resistance, offering less migration of liquid product after application Ensures high strength on contaminated surfaces and high performance on passive metals without an activator Typical Applications For straight/straight and straight/taper threads and fittings

Flexible Gasket Fast Cure B5205 - Red (300ml). Medium strength. High resistance to solvents. Resists high pressure when fully cures. Service Range: -50C - +150C. Tensile Sheer Strength: 3 N/mm. Max Gap: 0.125mm

Medium strength, For fine threaded fittings (up to 3/4 BSP). Used in hydraulic and pneumatic installations. Drinking water WRAS approved. Features: Instant low-pressure seal Resistant to fuel, oil, co more→olants and hydraulic fluids Locks connection against vibration loosening Maximum pipe size: 3/4". Comment: for small fine threaded metal fittings, especially hydraulic fittings.

General purpose. No hazard symbols, no risk phrases. White Material Safety Data Sheet - no need for COSHH assessment. Features and Benefits Drinking water WRAS approved Oil and vibration resistant Not more→es Maximum pipe size: 3in. Comment: No labelling, white MSDS.

Liquid thread sealant; replaces hemp, pastes and PTFE tape. Features and Benefits Clean and easy to apply Instant low pressure seal Conforms with DVGW approval (gas) Low strength and easily dismantled more→, seals and locks in any position Contains teflon to prevent galling Notes Coarse Threads Fast cure version of 572

Threadsealer for all coarse metal threads. Slow cure allows for adjusting the alignment of valves and fittings. Offers a breakaway torque of 7 Nm. Features and Benefits Designed for the locking and se more→aling of metal pipes and fittings Cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration The thixotropic nature of LOCTITE 572 reduces the migration of liquid product after application to the substrate Notes Maximum pipe size: 3 in. Comment: for metal coarse threads, slow curing, low strength.

LOCTITE 567 is an off-white, low strength, thixotropic methacrylate thread sealant that is ideal for use on coarse metal threads Features and Benefits Provides an instant low pressure seal that doesn' more→t creep, shrink or block systems Cures in the absence of air and by contact with metals when confined within threads up to M80/R3" Thixotropic and high/very high viscosity and is single component, so clean and easy to apply Approvals: UL approved

577 is a thread sealant that is designed for the locking and sealing of metal pipes and fittings, as well as other threaded assemblies. The sealant works by filling the space between threaded parts an more→d seals whilst locking at the same time. Features and Benefits Provides an instant, low-pressure seal for metal pipes and fittings Will not creep, shrink or shred and has excellent chemical and thermal resistance, offering less migration of liquid product after application Ensures high strength on contaminated surfaces and high performance on passive metals without an activator Typical Applications For straight/straight and straight/taper threads and fittings

Superfast sealing product especially developed for sealing pipe connections with relatively coarse threads and flanges. Allows instant start up of fluid systems when threads are tightened up as specified.

Loxctite 5920 Copper High Temp RTV Silicone Gasket Maker is a one part RTV silicone that has superior flexibility and adhesion. Excellent high temperature resistance. Medium body and easy to dispense. more→Non-corrosive, low odor, low volatility. Copper in color. Typical Applications: Valve covers, oil pans, timing covers, water pumps and thermostat housings. Applications: Gasket Sealant Dressings Industrial Gasketing Industrial Moisture Cure Industrial Silicone (Flexible) - RTV Non-Rigid Flange (Silicone and Polyacrylate) Agency Approvals / Specifications: CFIA Listed Color: Copper Cure Type: Moisture Cure Extrusion Rate (g/min.): >300 Fixture Time: 60 min. Full Cure Temperature (C): 25 Full Cure …

LOCTITE SI 595 is a clear, 1-part, thixotropic, room temperature vulcanizing, acetoxy silicone vulcanizing compound paste sealant with an acetic acid odour. It is designed as an excellent adhesive sea more→lant, perfect for mechanical assemblies. Features and Benefits Resists weathering and thermal cycling without shrinking, hardening or cracking One part component, requires no mixing Typical applications Electrical insulation Protection of leads from mechanical shock Trim bonding Sealing of ductwork, vents, flues, doors, and windows

Two part, very fast cure silicone that provides excellent bond strength to glass, metals and Ceran. Excellent temperature resistance - up to 180 C with the capability to resist higher temperatures for more→short-term exposure. Features and Benefits Extremely resistant to temperature Incredibly strong - shear strength (GBMS) N/mm: 1.35 Elongation at break: 210% Typical applications Sealing/bonding glass stove top assemblies, weld and rivet reduction in high temperature applications, and other high temperature bonding applications

WRC approved, multi purpose flexible silicone sealant for flanges of any size or shape. Can be used for metal, plastic and painted parts. Typical uses: Oil sump, valve cover, inlet manifold, timing ch more→ain cover, transmission cover, transmission pan, differential cover, water pump, thermostat etc.

Structural bonding - 1K silicone, oil resistance Features and Benefits 1-component silicone with very good oil resistance Neutral curing Also used for gasketing applications (flange sealing) Technical more→Data Description: 1K alcoxy silicone Elongation at break: 200% Hardess shore A: 44 Shear strength (GBMS) N/mm: 1,5 Max. gap: 1mm Skin over time: 25 Cure through volume in 24 h: 2.5 mm Service temperature range: +250 C Pack size: 300ml

Heavy Body, Grey, High Performance RTV Silicone Gasket Maker is for rigid flange assemblies. Features and Benefits Provides instant seal Excellent fluid resistance Non-corrosive, low odor, low volatil more→ity Grey in color Typical Applications: Industrial Moisture Cure Industrial Silicone (Flexible) - RTV Non-Rigid Flange (Silicone and Polyacrylate) Standards Met Automotive - OEM Specification Technical Information % Elongation @ Break: 175 Applications: Formed in Place (FIP) Sealing Color: Grey Cure Type: Moisture Cure, Oxime Extrusion Rate (g/min.): 105 Fixture Time: 10 min. Full Cure Temperature (C): 25 Full Cure Temperature (F): 77 Full Cure Time: 24 hr. Gap Fill (in.): 0.24 Key

545 Hydraulic, Pneumatic Sealant Thread Sealant is a pipe sealant designed for the locking and sealing of metal pipes and fittings. This product is specially formulated to offer high lubricity for eas more→y assembly and removal. Recommended for fine threaded fittings as used in hydraulic and pneumatic installations and small fittings in general. It contains no fillers or particles that could contaminate system fluids, foul valves, or clog fine filters and screens. Suitable for fittings up to 2 in. (50 mm) in diameter including pneumatic and hydraulic fittings. Excellent solvent resistance. ABSSM Approved. CFIA Approved. Applications: For Metal Parts Agency Approvals / Specifications: ABS, CFIA

Medium strength, For fine threaded fittings (up to 3/4 BSP). Used in hydraulic and pneumatic installations. Drinking water WRAS approved. Features: Instant low-pressure seal Resistant to fuel, oil, co more→olants and hydraulic fluids Locks connection against vibration loosening Maximum pipe size: 3/4". Comment: for small fine threaded metal fittings, especially hydraulic fittings.

For all coarse metal threads, especially nuclear power plants. Fast cure suitable for applications at low temperature. Features and Benefits Medium strength, methacrylate-based thread sealant well sui more→ted to the locking and sealing of metal threaded pipes and fittings up to 3" in diameter With PMUC approval, the product has low halogen and sulphur content and is designed for use in the nuclear industry on sensitive metals such as titanium Also suitable for stainless steel without the need for surface activation Thixotropic to reduce sealant migration.

General purpose. No hazard symbols, no risk phrases. White Material Safety Data Sheet - no need for COSHH assessment. Features and Benefits Drinking water WRAS approved Oil and vibration resistant Not more→es Maximum pipe size: 3in. Comment: No labelling, white MSDS.

577 is a thread sealant that is designed for the locking and sealing of metal pipes and fittings, as well as other threaded assemblies. The sealant works by filling the space between threaded parts an more→d seals whilst locking at the same time. Features and Benefits Provides an instant, low-pressure seal for metal pipes and fittings Will not creep, shrink or shred and has excellent chemical and thermal resistance, offering less migration of liquid product after application Ensures high strength on contaminated surfaces and high performance on passive metals without an activator Typical Applications For straight/straight and straight/taper threads and fittings

Liquid thread sealant; replaces hemp, pastes and PTFE tape. Features and Benefits Clean and easy to apply Instant low pressure seal Conforms with DVGW approval (gas) Low strength and easily dismantled more→, seals and locks in any position Contains teflon to prevent galling Notes Coarse Threads Fast cure version of 572

Designed for superior bonding and sealing properties to most surfaces (not recommended for concrete). Features and Benefits Resists aging, weathering and thermal cycling without hardening, shrinking o more→r cracking Formulated to withstand extremen temperature cycling, uv light and ozone The thixotropic nature of this product reduces the migration of liquid product after application to the substrate

High temperature, low viscosity, red adhesive/sealant. Suitable for temperatures up to 350C. Suitable for most substrates. Features and Benefits Temperature resistant Bonds almost all substrates Notes more→Strength: 2N/mm. Sealant type: silicone. Temperature: -40 to +300C. Comment: high temperature resistance, flowable.

Low viscosity silicone, thread sealer. Good on plastic and plastic to metal. Drinking water WRAS approved and NSF food approved. Features: - Thread sealant for fittings carrying hot or cold water. - L more→ocks connection against vibration induced loosening. Maximum pipe size: 3". Comment: for plastic and metal threaded fittings.