Power Tool Accessories

The Reduction Ring for Circular Saw Blades offers an adjustable arbour hole for a perfect fit on any machine.Reduction rings for circular saw bladesBase blade thickness of 1.7 mm up to max. 2.2 mm• Adjustable Arbour Hole for Perfect Fit on Circular Saw• Reduction Ring for Circular Saw Blades offers adjustable arbour hole for perfect fit on any machineSpecifications:Diameter mm: 30,0Bore size mm: 25,400Thickness mm: 1,5

The Reduction Ring for Circular Saw Blades offers an adjustable arbour hole for a perfect fit on any machine.Reduction rings for circular saw bladesBase blade thickness of 2.2 mm up to max. 3.0 mm• Adjustable Arbour Hole for Perfect Fit on Circular Saw• Reduction Ring for Circular Saw Blades offers adjustable arbour hole for perfect fit on any machineSpecifications:Diameter mm: 30,0Bore size mm: 20,000Thickness mm: 1,8

The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. The Long HSS Twist Drill Bit Ground is manufactured to DIN 340. The drill bit is Type N (flute angle) with …

The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endurance. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

Bosch 2608831021 SDS plus-3 Drill Bit For Masonry 8.0 x 200 x 260mm The Bosch 2608831021 is a single SDS plus-3 drill bit with a diameter of 8.0mm and a working depth of 200mm. The drill bit is suited to drilling in masonry and concrete. It is extremely long-lasting and wear-resistant thanks to its high-alloy steel construction and feature a 4-flute dura design which provides effective dust removal for optimised drilling performance. For use with rotary hammers with SDS plus holders. Features:
- SDS plus-3 Drill Bit offers durability while drilling concrete
- 4-flute dura design provides effective dust removal for increased endurance
- High-alloy steel produced with optimised hardening …

Backing pad for 125 mm abrasive diameter for clamping with screw/discSpecifications:Diameter mm: 125Shank diameter mm: 8

The Reduction Ring for Circular Saw Blades offers an adjustable arbour hole for a perfect fit on any machine.Reduction rings for circular saw bladesBase blade thickness of 1.7 mm up to max. 2.2 mm• Adjustable Arbour Hole for Perfect Fit on Circular Saw• Reduction Ring for Circular Saw Blades offers adjustable arbour hole for perfect fit on any machineSpecifications:Diameter mm: 30,0Bore size mm: 20,000Thickness mm: 1,5

For use with jigsaws with T-Shank clamping systems. The T 144 D Speed for Wood Jigsaw Blade delivers fast straight cuts in wood. Its sharp-ground, side-set teeth enable quick results. The high carbon steel blade material is appropriate for softwood and non-abrasive woodworking materials. Additionally, its large progressive tooth pitch (4-5.2 mm) enables the blade to cut a variety of wooden materials with 5-50 mm thickness. T 144 D HCS, side set, ground Softwood (5-50 mm), chipboards, wood core plywood, fibre boards • Fast Cuts in Softwood and Non-Abrasive Woodworking Materials • T 144 D Speed for Wood Jigsaw Blade delivers fast straight cuts in wood • Sharp-ground, side-set …

They are suitable for jigsaws with U-shanks (universal shanks) from all power tool brands. The U 101 B Clean for Wood Jigsaw Blade delivers clean straight cuts in wood. Its precision-ground teeth with a taper-ground body enable spotless results. Made of high carbon steel, this blade is appropriate for cutting softwood and non-abrasive woodworking materials. It is equipped with a fine progressive tooth pitch (2.7 mm) for cutting woodworking materials with 3-30 mm thickness. U 101 B HCS, ground teeth and taper ground Softwood, chipboard, wood core plywood, fibre boards (3-30 mm), plastics (3-30 mm) • Clean Cuts in Softwood and Non-Abrasive Woodworking Materials • U 101 B Clean for …

For use with jigsaws with T-Shank clamping systems. The T 118 A Basic for Metal Jigsaw Blade makes straight cuts in metal. Its milled, wavy-set teeth are ideal for cuts without special requirements. The fully hardened, high-grade HSS (high-speed steel) blade material is appropriate for cutting standard-strength, non-perforated metal sheets. Additionally, the blade’s very fine progressive tooth pitch (1.1-1.5 mm) cuts very thin solid sheet metals with 1-3 mm thickness. T 118 A HSS, wavy set, milled Thin sheet metals (1-3 mm) • Cuts in Solid Sheet Metal • T 118 A Basic for Metal Jigsaw Blade makes straight cuts in metal • Milled, wavy-set teeth are ideal for cuts without special re…

They are suitable for jigsaws with U-shanks (universal shanks) from all power tool brands. The U 118 A Basic for Metal Jigsaw Blade makes straight cuts in metal. Its milled, wavy-set teeth are ideal for cuts without special requirements. The fully hardened, high-grade HSS (high-speed steel) blade material is appropriate for cutting standard-strength, non-perforated metal sheets. Additionally, the blade’s very fine progressive tooth pitch (1.1-1.5 mm) cuts very thin solid sheet metals with 1-3 mm thickness. U 118 A HSS, wavy set, milled Thin sheet metals (1-3 mm) • Cuts in Solid Sheet Metal • U 118 A Basic for Metal Jigsaw Blade makes straight cuts in metal • Milled, wavy-set te…

They are suitable for jigsaws with U-shanks (universal shanks) from all power tool brands. The U 101 D Clean for Wood Jigsaw Blade delivers clean straight cuts in wood. Its precision-ground teeth with taper-ground body produce clean results. Made of high carbon steel, this blade is appropriate for cutting softwood and non-abrasive woodworking materials. It is equipped with a large progressive tooth pitch (4-5.2 mm) for cutting wooden materials with 10-45 mm thickness. U 101 D HCS, ground teeth and taper ground Softwood (10-45 mm), chipboards, wood core plywood, fibre boards • Clean Cuts in Softwood and Non-Abrasive Woodworking Materials • U 101 D Clean for Wood Jigsaw Blade delivers …

For use with jigsaws with T-Shank clamping systems. The T 119 BO Basic for Wood Jigsaw Blade makes curved cuts in wood. Its milled, wavy-set teeth are ideal for cuts without special requirements. Additionally, its narrow blade width is optimised for curved cuts. The high carbon steel blade material is appropriate for softwood and non-abrasive woodworking materials. The blade's fine tooth pitch (2 mm) enables cutting of thin wooden materials with 2-15 mm thickness. T 119 BO HCS, wavy set, milled Softwood (2-15 mm), plywood, chipboard, wood core plywood, fibre boards, especially for curve cuts • Curved Cuts in Softwood and Non-Abrasive Woodworking Materials • T 119 BO Basic for Wood …

For use with jigsaws with T-Shank clamping systems. The T 119 B Basic for Wood Jigsaw Blade makes straight cuts in wood. Its milled, wavy-set teeth are ideal for cuts without special requirements. The high carbon steel blade material is appropriate for cutting softwood and non-abrasive woodworking materials. Additionally, the blade's fine progressive tooth pitch (1.9-2.3 mm) enables it to cut a variety of wooden materials with 2-15 mm thickness. T 119 B HCS, wavy set, milled Softwood (2-15 mm), plywood, chipboards, wood core plywood, fibre boards • Cuts in Softwood and Non-Abrasive Woodworking Materials • T 119 B Basic for Wood Jigsaw Blade makes straight cuts in wood • Milled,…

It is compatible with all small Bosch angle grinders and compact belt sanders with an M10 fitting. The Handle is suitable for left- and right-handed operators. Handle appropriate for all Bosch one-handed angle grinders and compact belt sanders with M 10 • For Left- and Right-Handed Operators • Handle is suitable for left- and right-handed operators • Compatible with all small Bosch angle grinders and compact belt sanders with an M10 fitting

The Lambswool Bonnet is suitable for polishing old varnish and surfaces after sanding. It is compatible for use with a Bosch polishing sponge (1 608 613 013), Bosch felt polishing disc (1 608 612 002) or Bosch backing pad (2 608 601 209). The bonnet is intended for use with polishers. Lambswool bonnet Use with polishing sponge and rubber backing pad • For Polishing Old Varnish and Surfaces After Sanding • Lambswool Bonnet is suitable for polishing old varnish and surfaces after sanding. • Compatible for use with Bosch polishing sponge (1 608 613 013), Bosch felt polishing disc (1 608 612 002). • Also compatible with Bosch backing pad (2 608 601 209). Specifications: Working …

The Anti-Splinter Guard is compatible with jigsaws. The Anti-Splinter Guard prevents tearing out on top of the material. It is most effective when cutting with the grain or diagonal to it. Anti-splinter guard • Prevents Tearing Out on Top of the Material • Anti-Splinter Guard prevents tearing out on top of the material • Most effective when cutting with the grain or diagonal to it • Compatible with jigsaws

For use with jigsaws with T-Shank clamping systems. The T 301 CD Clean for Wood Jigsaw Blade delivers clean straight cuts in wood. Its precision-ground teeth with taper-ground body produce clean results. Made of high carbon steel, this blade is appropriate for cutting softwood and non-abrasive woodworking materials. It is equipped with a medium tooth pitch (3 mm) and long length (117 mm) and cuts wooden materials with 10-65 mm thickness. U 1 AO HCS, pointed teeth, ground teeth and taper ground Softwood, plywood, laminated panels (1.5-15 mm), especially for curve cuts • Clean Cuts in Softwood, Non-Abrasive Woodworking Materials • T 301 CD Clean for Wood Jigsaw Blade delivers clean …

Manufactured from carbon steel, which has a side set and milled tooth design, then polished and treated to prevent rust. The 6TPI are perfect for straight, fast cutting of softwood, chipboard, plywood and fibre board and all are attached with bayonet ends. Contents: 1 x DT144D Jigsaw Blade Set, 100mm (5 Piece)

Manufactured from carbon steel, which has a side set and milled tooth design, then polished and treated to prevent rust. The 6TPI are perfect for curved, fast cutting of softwood, hardwoods and plyboard, attached with bayonet ends. Contents: 1 x DT244D Jigsaw Blade Set, 100mm (5 Piece)

Expert Quality, manufactured by Schroder in Germany for Draper Tools. Manufactured from chrome vanadium steel with square drive ends. Packed in plastic case.1 x 3 - 6mm1 x 6 - 8mm1 x 8 - 11mm1 x 11 - 14mm1 x 14 - 18mm

Solid stamped beech for greater strength. For use with Draper Biscuit Jointer Stock No.75303 and other manufacturers similar machines. Packed in polybags of 100 pieces (approx.) with header card. *Assorted biscuits packed in the approximate numbers 0=25, 10=25 and 20=50.

Features:- Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement.- Application: Woodworking. Jigsaws. Joinery. Cabinet making- Features: Extra sharp teeth give a fine, fast cut- Fast cutting and an excellent finish- Tooth Type/Set: Ground and Taper Ground TeethSpecifications:Tooth Spacing - 3.2 mmOverall Length - 80 mmShank - Universal Plywood - 4 - 65 mmPlastics - 4 - 65 mmTeeth per Inch - 8 Pack Quantity - 5