Power Tool Accessories

• Mounted wheel on ø6mm shaft and suitable for use with Sealey and other brands of die grinder.• Supplied individually.Mounted wheel on ø6mm shaft and suitable for use with Sealey and other brands of die grinder. Supplied individually.• Mounted wheel on ø6mm shaft and suitable for use with Sealey and other brands of die grinder. • Supplied individually. • Model No. MW02Technical Specification:Head Diameter: ø13mmHead Length: 25mmNett Weight: 0.01kgOverall Length: 53mmShaft Diameter: 6mmDimensions: Length: 14mm x Height: 14mmWeight: 0.015KgWarranty: Consumable

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Stanley 1-TRA706T Heavy-Duty Staple 10mm (1000) The Stanley 1-TRA706T is a pack of 1000 heavy-duty staples ideal for a number of applications including insulation, carpet under laying and roofing felt. The sturdy plastic packaging reduces staple breakage and colour-coded packaging makes them easily identifiable. Features:
- For heavy-duty stapling jobs such as insulation, carpet under laying and roofing felt
- Colour-coded packaging makes size and product selection a cinch
- Fits TR100, TR200, TRE500 series, PHT150, PHT250 and Arrow T-50
- Sturdy plastic packaging reduces staple breakage Specification:
- Qty: 1,000
- Size: 10mm
- Net Weight: 0.204kg…

• For use with fibre backed sanding discs.For use with fibre backed sanding discs.Technical Specification:Pad Size: ø125mmThread Size: M14Weight: 0.222KgWarranty: Consumable

These Faithfull Centre Points are used for accurate alignment of dowel holes. To use: Place the blunt end in a hole already made for dowel in one piece of wood, place the second piece of wood in required position and press down to leave centre of second hole accurately marked.Contains: 4 x 6 mm dowel points.Additional Information:• Type: Marking Points• Dowel Diameter: 6mm• Pack Qty.: 4

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The Expert for Stone Cutting Disc provides powerful cutting performance in stone with maximum safety. The disc is composed of high-quality silicon carbide and resin specifically designed for work on stone with impressive results. The disc's precision-manufactured fibreglass fabric ensures high stability and safety when cutting. Use this disc for cutting stone. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. It is compatible with angle grinders. With depressed centre • Powerful Cutting Performance in Stone with Maximum Safety • Expert for Stone Cutting Disc provides powerful cutting performance in stone with maximum safety • The …

Stone Cutting Disc / Disc Diameter 125 mm

The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. It is compatible with angle grinders.Straight• Reliable Cutting in Metal• Standard for Metal Cutting Disc cuts reliably through metal• The aluminium oxide disc is designed for general use with metalSpecifications:Specification: A 30 S BFDiameter mm: 180Bore diameter mm: 22,23Thickness mm: 3,0Materials:Ferrous metalsMaterials in Detail:Steel/ferrous metal

The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. It is compatible with angle grinders.Straight• Reliable Cutting in Metal• Standard for Metal Cutting Disc cuts reliably through metal• The aluminium oxide disc is designed for general use with metalSpecifications:Specification: A 30 S BFDiameter mm: 230Bore diameter mm: 22,23Thickness mm: 3,0Materials:Ferrous metalsMaterials in Detail:Steel/ferrous metal

Stone Cutting Disc / Stone / Quantity 1 Piece / Disc Diameter 125 mm / Disc Thickness 2.5 mm / Bore 22.23 mm