Car Service Station Equipment Powertec

Excellent for general pulling50mm wide with two eyelets0.8m lengthDouble strapping results in 16 ton pull capacity (8 ton each)Available in two lengthsTonnage quoted is breaking load (now SWL) and is based on pull not lift

For hard to pull areas.For chassis ends, supports, light openings etc.38mm wide jaw.3 tonne pull capacity.

For use with Tack 'n' Pull, Part No. 91893, and a pulling system, these weld on plates are ideal for allowing hard to hold pulls.Size: 25 x 75mm.Pack of 5.Simply weld on to panel, slide the pull clamp on to plate & pull.For use with Tack 'n' Pull, please see Part No. 91893.Additional sizes available, please see Part No. 91100 (25mm), 91101 (38mm), 91102 (75mm).

For use with Tack 'n' Pull, Part No. 91893, and a pulling system, these weld on plates are ideal for allowing hard to hold pulls.Size: 38 x 75mm.Pack of 5.Simply weld on to panel, slide the pull clamp on to plate & pull.For use with Tack 'n' Pull, please see Part No. 91893.Additional sizes available, please see Part No. 91100 (25mm), 91101 (38mm), 91102 (75mm).

For use with Tack 'n' Pull, Part No. 91893, and a pulling system, these weld on plates are ideal for allowing hard to hold pulls.Size: 75 x 75mm.Pack of 5.Simply weld on to panel, slide the pull clamp on to plate & pull.For use with Tack 'n' Pull, please see Part No. 91893.Additional sizes available, please see Part No. 91100 (25mm), 91101 (38mm), 91102 (75mm).

Use to join or take the slack out of chainUsed to join or take the slack out of chainQuick Fit

Handy pull hook for quick pull.5 tonne pull capacity.65mm wide.Handy eyelet for chain hook up.Red J Hook.Part of the repair and aligment range.

Easy fast and reliable method of pulling strut towers.Developed to correct strut dimensions to factory specifications.3 tonne pull capacity.Easy to use.Reliable method for pulling strut methods.Part of the Power-TEC Body Pull Clamps Range.

Install in workshop floor for general body and chassis pulling.Allows full 360 degree pull.Floor pot layout available on request.10 tonne pull capacity.Drilled hole diameter must be 90mm

Four chain fixing position for bolting to workshop floor10mm chain locks into plate for general body and chassis pullingSize 190mm x 190mmPart of 91921

Use this handy tool to join or shorten chains.Suitable for joining chains.Double hook to allow joining of chains.Manufactured from Forged OCH Carbon.Weight 1.075kg.Part of the Power-TEC Straps and Chains Accessories Range.

Part of a range of HooksGrab hook for 10mm chain.

Shaft for the welded hinge alignment tool kits with vehicle specific heads.Included in sets 91899 and 91900

Multi purpose clamp can be used for any angle of pull all around the vehicle.120mm wide jaw.Multi purpose clamp can be used at any angle.Selected steel.Essential tool. Universal use.

Angled Pulling BlockRound FacedMultiple angles achievablePull in confined spaces with limited accessUse with 92474 or 92475 Body Hooks

Angled Pulling BlockSquare FacedMultiple angles achievablePull in confined spaces with limited accessUse with 92474 or 92475 Body Hooks

Genuine Power-TEC 91139 Hinge Head 15mmHinge Head suitable for use with Power-TEC 91899.Suitable for Ford Galaxy | Volkswagen Sharan.

Genuine Power-TEC 91140 Reverse Head 7.5mmReverse angle hinge head suitable for use with Power-TEC 91899.

Genuine Power-TEC 91142 Shaft for Monster Slide Kit

Spark Shields stop accidental damage to vehicle glass and panels. Protect other vehicles around the working area from grinding sparks.Spark Shields stop accidental damage to vehicle glass and panels.Used to cover windscreen, rear screen or car side.Size 1200 x 3400mm.Also available SparkShield for door panels (Part Number 91146).Part of the Panel Repair Range.

Control cutting depth and grind away just the weld ensuring safety, precision and efficiency. Laser welded vehicles include: Volkswagen, Porsche, Audi, Mazda, Ford and Volvo Spare Cutters available Part No 9129225,000 rpm.6mm Chuck Capacity.280 L/min Air Consumption.1.2 m/sec2 Vibration.100.5 Dba Sound pressure, Operating pressure 6.3 bar. Length of body 180mm

A very simple vehicle Glass removal method, works great on some older cars, also good for removing tailgate and rear quarter light windows. A set of 3 glass removal tools with T-handles for access.Reel of 72" long stainless steel square wire for removing glass.Set also includes wire feeder tool and 2pc wire grip handles.(Caution! not to be used by a novice on rain/light sensitive windscreens or encapsulated glass).Part of the Windscreen and Glass Removal Tools range.

Part of a range of windscreen and glass removal toolsFor glass and trim removal.Design provides fast cutting action required.Each wire acts like a cutting saw tooth.Made of Stainless Steel.50 metre per roll.

Part of a range of windscreen and glass removal tools.Specifically designed tool for removing glass.Adjustable T-Bar.Steel cable pull handle.Cuts Butyl caulking compound. Tempered steel blade.