Car Service Station Equipment Powertec

Part of a range of windscreen and glass removal tools.Specifically designed tool for removing glass.Adjustable T-Bar.Steel cable pull handle.Cuts Butyl caulking compound. Tempered steel blade.

Part of a range of windscreen and glass removal tools.For glass and trim removal.22m.Braided wire for a sawing action.Use with Power-TEC Glass Removal Kit - Part Number 91157.Part of the Window and Windscreen Tools range.

Eye bolts secure the Tie Rod Coupler to the broken tie rod by hand tightening or with a small leverage bar.Allows mechanic to easily steer vehicle into repair bay.

Socket end and pointed spindle end allow easy wheel pivoting for vehicle steering by temporarily re-connecting ball and socket tie rod ends.Tough alloy steel C-clamp.Provides a quick temporarily repair.Saves tow driver's time by fixing wheel alignment for easy loading and unloading.Allows mechanics to easily steer vehicle into repair bay.

Paint Stirrers Multi Pack ( 5 )

Separate spot welded and bonded panels easily with this tool.Sharpened on two edge for penetration between panels.Allows for impact to drive panels apart.Minimises damage.Super tough alloy steel.Contoured profile: Overall length = 295mm Blade length = 150mm Handle length = 145mm Blade height = 24.5mm Handle height = 28.76m Blade thickness = 5.66mm Handle tickness = 11.19mm

Easily separate hard to reach spot welded or bonded panels.Sharpened on three edges. The sharp end allows for penetration between panels.Side edges allow for side impact to drive the panels apart without damage.90 degree end for hard to reach pinchweld areas.Quarter panels, sills and any other pinchwelds.Save up to 15mins per panel replacement.

Spiral flute gives two cutting edges instead of one as on a normal step drill. This step drill has a deburring zone which can deburr the cutting edge.2mm steps.The step drill is a general multi use product, ideal for mechanics, panelbeaters and anyone involved in fabrication, it give the user the ability to increase the sizing of drilled or punched alignment holes accurately. 10mm shank.HSS Titanium-nitride coated to increase tool life.Spiral flute with edge breaker, self starter.

Tungsten carbide 3 point spot buster with multi-layering coating for super strength and boron steel.46mm long.Standard.Boron Steel.For use with Spotmatic.44mm version also available (91937).

The panel cup is an ideal cheap dent removal tool.Can also be used by anyone fitting or replacing the drop glass in cars, as they can attach the cup by suction to the outside of the glass, this helps ease installation by preventing the glass dropping down its channel. Frame made from high density aluminium and durable rubber.Handy release lever for quick release.75mm diameter.Also available in a 3 part set.

Panel cups create a powerful vacuum for panel repair.Cups are made from durable rubber.Frame is made from high density aluminium.Handy release lever for speed of release.100mm diameter.Also part of 3 part set.

Panel cups create a powerful vacuum for panel repairCups are made from durable rubberFrame is made from high density aluminiumHandy release lever for speed of useSize 125mm diameterAlso part of a 3 part set

Mobile bumper rack holds up to 6 bumpers.Height 2.1m.Adjustable.Support arms adjust to storage requirements.Store against the wall.Up to 6 large bumpers can be held secure.

Holds door open whilst hammering, grinding, sanding or painting.Fully adjustableSimple fixing into door lock plate and lockQuick release

Use to restore the natural contour of panel by raising or lowering defect as close as possible to original surface.Minimise amount of removal during panel preparation.For use on minor damage.Use glancing blows to the panel.File serrations avoid stretching.Part of the panel repair range.

With a file holder, the Flexicut Body File is used for re-shaping panels to show high and low spots.Teeth on both sides.Can be adjusted to convex or concave.350mm long.8tpi.Consumable item.

Single sided, half round rigid body file.Use with Part No 91186 File holder.350mm long.8tpi.Part of the panel repair range.This is a consumable item.

Adjustable file holder will bend any 350mm body file to fit concave, flat or convexAdjustable file holder for body files.Bends bodyfiles to fit concave flat or convex panels.Made from aluminium and plated steel.Use with body file - Part No 91184Supplied without a file.

The PowerTEC range of Professional Panel repair dollies, are manufactured from Induction Hardened, 1055 grade, medium carbon steel, which are then heat-treated, sand-blasted, ground and polished, to achieve a fully polished working surface on each dolly.Multi-use tool for small area repairs & finishing; can be worn as a ring for precise control.Weight: 310g.Dimensions (h x w x d): 35 x 70 x 60mm.

The shot dolly is used as a backing for forming metal into concave curve.Metal shot contained in fabric pocket.For forming concave curves.Weight: 1190gms.Made in the USA.Part of the Hammer | Dollies | Spoons range.

The PowerTEC range of Professional Panel repair dollies, are manufactured from Induction Hardened, 1055 grade, medium carbon steel, which are then heat-treated, sand-blasted, ground and polished, to achieve a fully polished working surface on each dolly.General purpose dolly used for areas where the panel is curved & a flat surfaced dolly cannot be used.Weight: 1200g.Dimensions (h x w x d): 60 x 40 x 125mm.

The PowerTEC range of Professional Panel repair dollies, are manufactured from Induction Hardened, 1055 grade, medium carbon steel, which are then heat-treated, sand-blasted, ground and polished, to achieve a fully polished working surface on each dolly.Two different faces for use on multiple surfaces.Weight: 1150g.Dimensions (h x w x d): 65 x 75 x 60mm.

The PowerTEC range of Professional Panel repair dollies, are manufactured from Induction Hardened, 1055 grade, medium carbon steel, which are then heat-treated, sand-blasted, ground and polished, to achieve a fully polished working surface on each dolly.General purpose dolly for various shaped panels, conviniently shaped for grip.Weight: 1250g.Dimensions (h x w x d): 70 x 65 x 60mm.

The PowerTEC range of Professional Panel repair dollies, are manufactured from Induction Hardened, 1055 grade, medium carbon steel, which are then heat-treated, sand-blasted, ground and polished, to achieve a fully polished working surface on each dolly.General pupose dolly which can also be placed against curved panels.Weight: 830g.Dimensions (h x w x d): 80 x 20 x 57.