Car Service Station Equipment Powertec

The Trim Removal Tool is a simple easy to use product, it allows for the easy removal of car window strips.365mm long.Made from composite materialIt has a thin leading edge that can be inserted under the trim edge over a length of 365mm, then applying pressure downwards lifting the trim off its clips.Reduces the potential of damage usually caused by screwdrivers being used as pry bars Part of the panel repair range.

Use to lightly knock down high spots.Paintless Dent Removal Pencil Punch.90mm long.15mm diameter.Made in SheffieldPart of the panel repair range.

An ideal tool for the professional bodyshop but also suitable for joiner, DIY, model making and pattern making etc.Ideal for estimators to assess the level of panel damage.Compare damaged panel to original panel profile for exact alignment.Plastic construction prevents damage to the bodywork.285mm x 100mm x 20mmCan also be used for joinery, DIY, model making and pattern making.

Minimise paint removal when earthing.Sand off small area, using welder gun as earth, weld point of Spot Earth to panel

Holds wire in place during welding squiggly wire.Avoid burnt fingers.Ensure good weld.Magnetic

Included in Panel Repair Kit 91953 and 91953Weight 1.5kgFor use with a single sided spot welder or panel repair welder.Triangle plate welds to panelRotate plate to next point when worn.

Adaptor onlyTriangle holder for 91244

For MIG braze plug welding.Instead of spending time drilling holes use this tool.Saves hours of time.6mm x 20mm hole punch.Also avaliable 8.2mm x 24mm Hole Punch (Part Number 91250).Part of the welding panel repair range.

For MIG braze plug weldingInstead of spending hours drilling holes use this tool.Saves hours of time.Size 8mm x 20mm.6mm x 20mm tool available - Part No 91250.Part of the Welding panel repair range.

Used extensively in car body restoration work on curved panels.For car body restoration work on curved panels.Creates a 20mm deep step. 10mm wide.Forms a curved flange for flush lap weld joints.Soft grip handles.Part of the panel repair range.

Ditch that block of wood with this simple tool. Finally a convenient door aligning tool.Saves spaceFits easily into your tool drawerNo long, heavy bar to storeUses your breaker bar for leverageYou won't have to hunt for the shop tool

Designed for difficult access.Removes Volkswagen, Audi, Porsche and Mercedes-Benz doors.Loosen the bolt with the breaker bar and remove with ratchet.Kit includes: Breaker Bar, Ratchet and 7 Torx head sockets.Sizes: M8, M10, M12, and Torx T30, T40 and T50.

For the safe removal of trim and clips used on modern vehicles.For the safe removal of trim and clips used on modern vehicles.Anti scratch.Composite material.Use on internal and external trim.Time saver.

Removes plastic trim fasteners easily with fine hook and extended reachLength 510mm.Manufactured from Chrome Vanadium.Time saver.Removes plastic trim fasteners easily.Extended length for awkward areas.

A set of four heavy duty impact scrapers made from high quality composite material for removing trim, stickers etc.Made from tough composite material for impact use.Designed to remove plastic trim from vehicles.270mm long 19mm | 22mm | 25mm | 38mm wide.Can be re-sharpened with a file.Time saver.

Non-marking wedge with curved end for easy access.25mm blade.Removes clips, trim, panels and plastic moulding with marking.Composite material.No danger of damage to paintwork.Part of the Panel repair range.

Removes old paint, seam sealers from body panels.Also useful on windscreen sealers and mouldings.Removes weather striping.Removes urethane and other tough adhesives.Stainless Steel.Part of the Paintshop Tools Range.

Handy tool for picking up steel particles after drilling out rivets.Handy tool for picking up steel particles after drilling out rivets.Flexible shaft for good access.Also used as a magnetic pick-up tool.540mm length.Part of the Panel repair range.

Replacement drill bit for Spotmatic and other spot removal toolsCobalt DrillFor use with Spotmatic (91150)Lenght of tool 44.20mmHardened steelCutting Face 3/8"

2.0mm Stud Nails.Approx 500 pieces.Made from Q235 Steel.Copper coated.For use with Power-TEC Part Number 92314.Also available 2.50mm Stud Nails (Part Number 91294).

Range of consumable products for the Professional bodyshop.Q235 steel.Copper coated.For panel pulling.Consumable.For use with Power-TEC Part No. 92314. Also available 2.0mm Stud Nails - Part Number 91293.

Trim Rivets.Size: 3 x 3.2mm.Pack of 100.Coppered steel.

Used for panel pulling.Q235 steel copper coated.Packed 20 in a bag.Used for panel pulling.Consumable.Adaptor available separately - Part No 91245.

A professional tool for the bodyshop.Manufactured from 1055 medium carbon steel.Genuine hickory shaft.One end angled and the other crowned straight.Professional tool for reforming door skins.Weight 475 grams.