Turntables Pro-Ject

The Ground-IT E is the perfect upgrade not only to make your turntable centre stage in your system but also improve performance. Made from a thick piece of MDF and finished in a stunning high-gloss piano lacquer the affordable Ground-IT E is designed to benefit a large range of turntables from the Pro-Ject range as well as other manufacturers. The base sits upon 4 conical spiked feet that are sandwiched between special designed damping rings to reduce resonance and create a decoupling solution between the turntable and any surface.

The Acryl-It is a direct replacement acrylic platter for the XPression or Debut III turntables
Acrylic is a superior material for turntable platters and upgrading to the Acryl-It is a huge improvement.
Simply remove the stock aluminum platter and mat, replacing them with the Acryl-It
Place an LP directly on the Acryl-It (no mat necessary) and lower the stylus.
From the first notes you'll hear smoother, richer tonality, better bass performance and even a lower noise floor!

The Debut Alu Sub-Platter lifts the performance of any Debut turntable to the next level. The diamond cut aluminium sub-platter is machined to the highest tolerances for greater performance and reliability over the standard supplied sub-platter.

The perfect upgrade for any owner of the Elemental or Essential II turntable. The use of acrylic reduces tinny frequencies and helps accentuate the mid-range better.

The Pro-Ject Signature Record Puck is designed for enthusiasts seeking to elevate their vinyl listening experience specifically on Pro-Jects Signature 10 and Signature 12 Turntables. This puck applies just the right amount of pressure to stabilise records during play without impacting rotation accuracy. This minimises vibration whilst improving accuracy and tracking. Moreover the underside has been lined with a felt mat adding a layer of protection for rare or limited edition vinyl.

Crystal clear acrylic cover for turntables
Protects turntable and needle
suitable for:
Elemental
Elemental Phono USB
Colour: Transparent
Material: Acrylic
Height (cm): 10.3
Depth (cm): 33.1
Type: Cover
Width (cm): 47.1
Made in: Czech Republic
Suitable for: Elemental Phono USB;Elemental
Suitable for Brand: Pro-Ject

Clean your valuable vinyls gentle, but efficient! Clean records sound much better and help to protect the stylus from dust. Spin Clean cleanes manually and is suitable for all kinds of records: LP‘s, 45‘s, 78‘s.How to use:1. Insert your record into the SPIN-CLEAN® Record Washer System MKII.2. Rotate the record CLOCKWISE three times and then COUNTER CLOCKWISE three times.3. Carefully remove and wipe the record with the pre-washed reusable drying towel in a CLOCKWISE CIRCULAR MOTION.4. Once dry, your LP, 78 rpm, or 45 rpm record is ready to be played or returned to its sleeve.Both sides of the record are clarified in one go and dust remains at the bottom of the basin. Of course all com…

Upgrade your Pro-Ject Debut or Xpression turntable to Pro-Ject Esprit standards with Pro-Ject Acryl it. Acryl it is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances.

The Classic Evo sub-platter upgrades all older The Classic and The Classic SB SuperPack turntables to the same standard as The Classic Evo. The diamond cut aluminium sub-platter has been machined to much improved and higher tolerances than the version supplied with earlier models and will be a substantial upgrade to those sub-platters. It adds more mass to the entire platter and drive system resulting in additional damping of noise and unwanted resonances. The improved tolerances during production will increase overall speed accuracy the additional mass improves short term speed stability.

Gently cleans the plate with broom made from natural hair
Fits all Primary, Essential and Debut turntables
Heavy base for stable stand, easy setup
Elegant appearance, robust materials
Uni-pivot design

Vinyl sound can be significantly improved, when unwanted resonances between record and platter can be reduced, while playback. Therefore surfaces of record and platter should connect tigthly. Standard record pucks, that use weight to achieve this, have two disadvantages:
1) The weight can induce higher levels of rumble, when used with lower cost turntables which have less massive main bearings. This will affect the sound negatively.
2) Instead of the desired closer contact between your vinyl and turntable is often achieved the opposite: Due to the high weight in the middle of the plate arching the record and the edge loses contact with the turntable.
Clamp it is the real solution, an accessory …

Replacement clamp for the Pro-Ject VC-S. This sturdy metal clamp helps keep the record in position whilst cleaning your records with the VC-S as well as keeping the label dry and protected.

This heavy Record Puck ensures a firm fit between the record and the platter surface.Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound.It recommend using heavy weight clamps on RPM, Signature & Xtension series turntables. The alternative way to achieve this effect on smaller turntables is Pro-Ject record clamp Clamp it.
Colour: Black
Material: Brass
Made in: China
Original Colour by Producer: Black