Other Hand Tools

The Faithfull fully insulated crow bar is made to BS8020 standards. With a pencil point at one end and a flat chisel edge at the other. The insulated shaft is manufactured using a solid fibreglass cor more→e which is coated with an abrasive resistant orange polymer coating. These insulated tools conform to BS8020:2002 for working on or near live cables. They are individually tested to 10,000 volts, and guaranteed to 1,000 volts.Additional Information:• Type: Crowbar• Length: 1.55m• Weight: 6.0kg

Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended more→by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 3mm (1/8 in).Additional Information:• Character Height: 3mm

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs.This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 10mm.Working Length: 80mm.Overall Length: 130mm.Additional Information:• Diameter: 10mm• Overall Length: 130mm• Working Length: 80mm• Pack Qty.: 1

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs.This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 12mm.Working Length: 100mm.Overall Length: 150mm.Additional Information:• Diameter: 12mm• Overall Length: 150mm• Working Length: 100mm• Pack Qty.: 1

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs.This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 14mm.Working Length: 105mm.Overall Length: 160mm.Additional Information:• Diameter: 14mm• Overall Length: 160mm• Working Length: 105mm• Pack Qty.: 1

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs.This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 16mm.Working Length: 115mm.Overall Length: 180mm.Additional Information:• Diameter: 16mm• Overall Length: 180mm• Working Length: 115mm• Pack Qty.: 1

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs.This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 3mm.Working Length: 30mm.Overall Length: 60mm.Additional Information:• Diameter: 3mm• Overall Length: 60mm• Working Length: 30mm• Pack Qty.: 1

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs.This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 4mm.Working Length: 43mm.Overall Length: 75mm.Additional Information:• Diameter: 4mm• Overall Length: 75mm• Working Length: 43mm• Pack Qty.: 1

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs.This Faithfull Lip & Spur Wood Drill Bit has the following specification: Diameter: 5mm.Working Length: 50mm.Overall Length: 85mm.Additional Information:• Diameter: 5mm• Overall Length: 85mm• Working Length: 50mm• Pack Qty.: 1

The Faithfull Magnetic Retrieval Pen is a compact and lightweight pen sized extendable pick up tool. The magnetic tip is great for retrieving small metal objects such as nails, screws and washers from more→hard to reach areas. The telescopic shaft can be extended from 150mm to 650mm. It can also be used as a presentation pointer and the handy pocket clip allows it to be stored in a pocket ready to hand.

This Faithfull flexible scraper is ideal for removing soft carpet adhesive residues, paint, silicone joints and for many other scraping applications. Compatible with many multi-function oscillating po more→wer tools.Additional Information:• Type/Use: Scraper• Size: 52mm

The Faithfull Pry Bar/Nail Lifter has been manufactured from high quality carbon steel and has a 90º angle head for rapid nail removal. It has a small profile for removal of nails in confined spa more→ces, and a wide, flat claw provides a firm base to prevent sideways movement. Designed for pulling nails, prying, and general dismantling of timber constructions.Additional Information:• Type: Pry Bar• Length: 250mm

The Faithfull No.80 cabinet scraper removes fine shavings from wood to give a very smooth finish. Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes on large areas more→. Unlike an abrasive it does not produce dust which can clog the grain.The 70mm wide, 1.8mm thick blade is held in a fine grey iron cast body with a machined base. The wing handles allow for comfortable use over long periods. The cut can be changed from coarse to fine by turning the thumbscrew which forces the blade to bend slightly and protrude through the scrapers base.The blade can be easily resharpened with a sharpening stone and a burr turned with a burnishing tool.Replacement blade code: FAISCRAPERRBAdditional …

The Faithfull cabinet scraper will produce a fine finish on solid wood and veneers.Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes. The cabinet scraper removes more→fine shavings from wood to give a very smooth finish. Unlike an abrasive it does not produce dust which can clog the grain. The cut is controlled by finger pressure to bow out the blade, varying the curve and localising the cut.The scraper can be easily resharpened with a file and a burr turned with a burnishing tool. Made from C60 Spring Steel. Size: 150mm x 60mmAdditional Information:• Type: Cabinet Scraper• Scraper Width: 150mm

Faithfull replacement blade for a concave spokeshave. Cutter Width: 52mm.Additional Information:• Type: Concave Blade• Cutter Width: 52mm

Replacement four sided scraper blade for the FAIWS624 Scraper.Additional Information:• Type: Blades

These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch t more→o avoid damage to the end of the parallel punch.

The Faithfull SK7 Sharp Scraper Blade is perfect for fast, clean and deep cutting. Ideal for cutting soft expansion joints, window sealing putty and insulation materials. Manufactured from high-carbon more→SK7 steel for a long working life. Compatible with many multi-function, oscillating power tools. Specification: Cutting Length: 100mmWidth: 8-28mmMaterial: SK7 blued steelAdditional Information:• Type/Use: Scraper• Size: 100mm

The Faithfull Slip Joint Water Pump Pliers are suitable for gripping pipes, nuts, bolts and irregularly shaped objects. The offset jaws are angled to ensure a positive action and apply extra power whe more→n leverage and grip are applied. The sliding pivot 'slip-joint' on the lower jaw enables rapid adjustment to seven pre-set positions, give the advantage of a wide range of jaw openings up to 60mm, without the distance in the handle growing wider making them difficult to grip. The long handle design provides increased leverage for a positive grip. Specifications Manufactured from chrome vanadium steel with vinyl soft-feel coating for user comfort. Offset jaws Adjustable sliding pivot lower jaw: 7 p…

The Faithfull Combination Shave Hook features a stainless steel blade for long-life and resistance to corrosion. The soft grip handle provides greater comfort. Shave Hooks are used for stripping paint more→from surfaces such as window frames, mouldings, doors and furniture. The heart-shaped blade of the Combination Shave Hook aids the removal of paint from curved and difficult surfaces. Specification Blade Width: 55mmBlade Length: 80mmOverall Length: 210mmAdditional Information:• Shape: Combination• Handle: Soft Grip

Faithfull Soft Grip Decorator's 4-in-1 Tool with a corrosion resistant, stainless steel blade for long-life. The soft grip handle provides greater comfort. Fitted with a metal end cap that can be used more→to knock back protruding nails. This versatile tool can be used as a flat scraper and features a scraper point for cleaning out cracks prior to filling. The curved blade is ideal for cleaning rollers. Blade Width: 60mmAdditional Information:• No. of Tools: 4• Blade: Stainless Steel

The Faithfull Heavy-Duty Long Handled Scraper has a high-carbon steel blade. Ideal for removing paper and vinyl wall coverings. The long-handle has a soft grip with internal storage for spare blades. more→Blade Width: 100mm (4in)Overall Length: 300mm (12in) Includes 5 replacement blades housed in the handleAdditional Information:• Type: Wall Strippers

The Faithfull Heavy-Duty Long Handled Scraper has a high-carbon steel blade. Ideal for removing paper and vinyl wall coverings. The long-handle has a soft grip with internal storage for spare blades. more→Blade Width: 150mm (6in)Overall Length: 600mm (24in)Additional Information:• Type: Wall Strippers

The Faithfull Triangular Shave Hook features a stainless steel blade for long-life and resistance to corrosion. The soft grip handle provides greater comfort. Shave Hooks are used for stripping paint more→from surfaces such as window frames, mouldings, doors and furniture. Specification: Blade: Width: 55mm, Length: 80mmOverall Length: 210mmAdditional Information:• Shape: Triangular• Handle: Soft Grip