Other Hand Tools Stanley

The Stanley FatMax® Folding Pocket Chisel is ideal for job site work. The blade is made from hardened and tempered carbon steel for edge retention. It folds within the handle to fit in the pocket, preventing blade damage and trouser cutting. Fitted with a bi-material for comfort. It has a steel strike cap, which is suitable for use with a hammer.Additional Information:• Blade Width: 25mm

This pack of 2 Stanley Replacement Tungsten Carbide Blades are to fit the Stanley 028640 carbide scraper.They are suitable for heavy duty scraping of paint, glue, timber and varnish. Specifications: Blade: 50mm.Pack Quantity: 2. Additional Information:• Type: Blades

This Stanley single pinion hand drill had a 3-jaw chuck for greater versatility. It has an aluminium gear wheel which is long lasting, strong, and lightweight. It has a mandrel with three 8mm diameter bits. Made of precision die cast for strength and durability.Specification: Length: 265mm.Additional Information:• Type: Hand Drill• Chuck Capacity: 8mm

This Stanley 029088, a 3 assorted Abrasive Brush Mixed Set comes with nylon, brass, and wire filling. They are suitable for a multitude of cleaning jobs.Additional Information:• Wire: Mixed Set

Stanley 0-58-930 Dynagrip Nail Punch Set, with a long working life With Bi-material for a comfortable cushioned grip, the Stanley 0-58-930 tempered steel Dynagrip nail sets will give a good, long working life when driving finish nails beneath trim work. They have been colour coded for easy size identification and the long length allows for use in hard to reach areas. Features:
- Cupped tip for easy alignment
- Elastomer handle for a good hand grip
- Colour coded by tip size for easy identification
- Used for driving finish nails beneath trim work
- Long length allows for setting nails in hard to reach places
- Induction heat treated for safety and improved performance
- Over-moulded …

Stanley 0-70-447 Adjustable Pipe Cutter 3-22mm
The Stanley 0-70-447 Adjustable Pipe Cutter has an all-metal body and steel guide rollers for a long service life and accuracy. The Cutter will cut metal piping in diameters from 3mm to 22mm.Features:
- Adjustable to cover range of sizes

- Durable metal body

- Replaceable cutting wheel (not included)

- Steel guide rollers for accuracy
Specification:
- Part number: 0-70-447

- Working diameter: 3mm to 22mm

An adjustable pipe cutter for 3 to 30mm pipe. It has a durable metal construction and steel guide rollers for accuracy. Supplied with a replacement cutter wheel in the handle, and a built-in de-burring tool for a clean cut edge.Additional Information:• Suitable For: Copper• Capacity: 3-30mm

Bi-Material handles for comfort and grip
Made from forged alloy steel
Serrated cutting edge to prevent slippage when cutting
Bi-Material handle for comfort and grip

The Stanley 0-69-014 Bradawl is ideal for boring holes The Stanley 0-69-014 Bradawl is ideal for boring holes. It features a hardened, tempered and sharpened blade for efficient performance and a plastic sleeve for effortless pushing and turning. It is extremely long-lasting and rust-resistant thanks to its Nikel coating. Features:
- Robust handle
- Rust-resistant Nikel plating
- Textured handle for improved grip
- The blade shaft is cranked to prevent it from turning in the handle
- Hardened, tempered and sharpened blades for efficient performance Specification:
- Size: 32 x 2mm
- Net weight: 0.5kg

Pin punch Quality chrome vanadium steel increased strength and durability for retained accuracy when marking out centre lines , hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Size: 140 x 10mm (5.1/2 x 3/8in).Additional Information:• Length: 140mm (5.1/2in)• Width: 10mm (3/8in)

This Stanley 5044 Bit Brace, 250mm/10in, has a 12-point, 3-way, ratchet for use in confined spaces. The head is ball bearing mounted for smooth operation and has a 13mm universal chuck with 4 jaws and with a holder for square tip bits.This brace is chromium plated for corrosion resistance and longer life, it has a reversible 8 tooth ratchet. Specification: Length 250mm. Additional Information:• Type: Brace• Chuck Capacity: 13mm

Hardened and tempered square head centre punch with knurled shank and black coated finish. The knurled body provides a secure grip during use. Length: 3.2 x 100mm (1/8 x 4in).Additional Information:• Length: 100mm (4in)• Tip: 3.2mm

Mark lines with ease using The Stanley 0-47-100 Metal Chalk Line The Stanley 0-47-100 chalk line is perfect for marking long, straight lines. It has a 30g chalk capacity and features a metal outer case for maximum strength and durability on the job site. Features:
- 30g chalk capacity
- Can be used vertically as a plumb bob
- Die-cast aluminium case for durability
- Metal case for strength and long life
- Stainless steel end hook for added durability and rust prevention
- The line is blocked by folding the handle
- The powder is put in by screwing the watertight upper milled stopper
- Equipped with felt to regulate the flow of powder
- Universal hanging clip Specification: …

Stanley 0-47-440 Chalk Line 30 Metre The Stanley 0-47-440 chalk line is ideal for marking long, straight lines on relatively flat surfaces. Its high impact ABS case makes it extremely robust for job site use and the sliding door allows for quick and easy refill. It has a 30g chalk capacity and can also be used vertically as a plumb bob. Features:
- 30g/ 1oz chalk capacity
- Can be used vertically as a plumb bob
- Crank folds into case for storage
- High impact ABS case for durability
- Holds 100ft of String
- New Ergonomic Design
- On-Board Hook Storage
- Sliding door for quick and easy refill
- Stainless steel end hook does not rust Specification:
- Net Weight: 0.107kg…

Stanley 0-47-443 Chalk Line 30 Metre Blue Chalk & Level The Stanley 0-47-443 is a 3 piece chalk set suitable for marking long, straight lines on relatively flat surfaces. It is convenient and durable, constructed from ABS plastic with a stainless-steel hook for rust resistance. This model has a 30g chalk capacity with sliding door to allow for easy re-filling and can also double up as a plumb bob. Features:
- 30g/ 1oz chalk capacity
- Can be used vertically as a plumb bob
- Crank folds into case for storage
- High impact ABS case for durability
- Holds 100ft of String
- New Ergonomic Design
- On-Board Hook Storage
- Sliding door for quick and easy refill
- Stainless steel …

A patented cam lock clamping feature secures workpiece for easy accurate cutting. A built-in saw stop prevents cutting into the mitre box. The mitre box has 90 and 45 mitre slots as well as 22.5 slots for octagon shapes and is of a one piece injection moulded design for extra strength. Available with or without a fine tooth tenon saw. Size 310 x 130mm Maximum depth of cut 80mm

The Stanley Compact Chalk Line is less than half the size, by volume, of standard chalk reels. It has a 9m precision line that snaps clean with accurate lines and a high impact ABS housing that is durable and light. It also has soft grip over-moulding that provides more user comfort and a secure grip. The 3:1 rewind gear ratio retracts the line 3x faster than a standard 1:1 reel. The chalk lines slide-open door allows for quick chalk refills and has a compact reel chalk capacity that gives up to 50 lines per refill. Also features a belt clip for easy transport and storage.Additional Information:• Line Length: 9m

STHT1-05868 Bi-material handle provides comfort and protection. Makes carrying drywall and other boards easier. Sold in pairs.

The Stanley Plasterboard Saw is fitted with a fully hardened, tempered blade. Designed for long cutting life. The teeth are engineered to help prevent clogging. With a sharp tip for easy plunge cuts. Fitted with a ergonomically designed handle is cushioned for increased comfort.Additional Information:• Length: 150mm• TPI: 6

The Stanley DynaGrip™ Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long length allows for setting nails in hard to reach places. Fitted with a over-moulded DynaGrip™ grip, to help dampen vibrations and reduce slipping during use. The grip is colour coded by tip size for easy identification. Used for driving finish nails beneath trim work.Tip Size: 1/16inLength: 5inColour: Grey SleeveAdditional Information:• Length: 125mm (5in)• Tip: 1.6mm (1/16in)

The Stanley DynaGrip™ Nail Punch is induction heat treated for safety and improved performance. With a cupped tip for easy alignment. Its long length allows for setting nails in hard to reach places. Fitted with a over-moulded DynaGrip™ grip, to help dampen vibrations and reduce slipping during use. The grip is colour coded by tip size for easy identification. Used for driving finish nails beneath trim work.Tip Size: 1/32inLength: 5inColour. Yellow SleeveAdditional Information:• Length: 125mm (5in)• Tip: 0.8mm (1/32in)