Other Hand Tools Stanley

The STANLEY Telescopic Drywall Support has a heavy-duty, ribbed aluminum body which stays flat and rigid. Its adjustable pole provides easier lifting of boards, the efficient clamp holds the board firmly in place. Specification: Height: 1150mm (45.1/4in).Additional Information:• Type: Support

Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.1 x Stanley Surform® Shaver Tool Blade 60mm (2.1/2in) Replacement blade for Surform® Shaver Tool (STA521115)Additional Information:• Blade Type: Shaver• Length: 60mm

Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.1 x Stanley Surform® Blade Standard 250mm (10in)Additional Information:• Blade Type: Standard Cut• Length: 250mm

The Stanley Tools Super Wonder Bar Pry Bar is made from forged, high-carbon steel for added strength and durability. Polished, bevelled cutting edges with a high-visibility, powder-coated finish. It has an arched centre for swing during nail pulling, no need for an additional wood block. The extended tongue provides added grip and access for hard-to-reach places. Tight radius on bend angle aids in positioning bar. Useful for almost any prying, nail pulling, wood splitting or levering job you are likely to encounter.

The Stanley Compact Chalk Line is less than half the size, by volume, of standard chalk reels. It has a 9m precision line that snaps clean with accurate lines and a high impact ABS housing that is durable and light. It also has soft grip over-moulding that provides more user comfort and a secure grip. The 3:1 rewind gear ratio retracts the line 3x faster than a standard 1:1 reel. The chalk lines slide-open door allows for quick chalk refills and has a compact reel chalk capacity that gives up to 50 lines per refill. Also features a belt clip for easy transport and storage.Additional Information:• Line Length: 9m

Heavy-duty ribbed aluminum body
Stays flat and rigid with wooden handle
Strong clamps to hold paper or screens
Bi-material handle
Accepts most paper or screens

The Stanley 0 05 927 Hand Sander has a heavy-duty, ribbed aluminum body that stays flat and rigid. Its efficient clamp design holds paper or screen firmly in place. Fitted with a comfortable, bi-material handle. Accepts most sandpaper and sanding screens.Additional Information:• Type: Hand Sander

Stanley 1-55-515 Wonder Bar 34cm Get the prying power you need with the 1-55-515 Wonder Bar Pry Bar. This strong hand tool is designed to give you excellent leverage for pulling nails, lifting, and scraping. It's heat-treated, forged high carbon steel ensures maximum durability and long life. Features:
- Made from heat-treated, forged, high carbon steel for strength and durability
- The end has a high visibility powder coated finish and polished tips
- Bevelled nail slots make it more efficient for pulling nails, lifting or prying
- The contoured bar makes it easier to use Specification:
- Size: 340 x 45mm (13 x 1 3/4 in)
- Net Weight: 0.596kg

This moulding pry bar is made from heat treated, forged, high carbon steel The contoured bar makes pulling nails, prying and lifting easier and the flat surface allows users to cleanly pry moulding and trim, thus reducing material damage. The polished, bevelled claws allow precision nail pulling and prying. Features:
- Flat surface allows users to cleanly pry molding and trim, reducing material damage
- Forged high-carbon alloy steel for long life
- Tempered for safety
- Heat treated for durability
- Polished bevelled claws allow precision nail pulling and prying Specification:
- Length: 250mm (10 in)

Stanley 0-28-590 Window ScraperThe Stanley 5930 window scraper uses a standard 1992 trimming knife blade to scrape excess paint from window panes and other surfaces. With the guard fitted it makes a good windscreen ice scraper. In packaging with hanging hook.Features:
- Ideal for scraping paint from windows, mirrors, tiles and other flat surfaces
- It has a comfortable plastic handle with a detachable blade guardComes with:
- 11-921 utility bladeSpecification:
- Overall Length: 178mm

These Stanley Trowels have stainless steel blades for rust protection and durability. They have a slight bow in the blade which makes them ideal for drywall joints. Their bi-material handles ensure comfort and protection.

The Stanley Stainless Steel Taping Knife has a bi-material handle for comfort and protection. Its stainless steel blade prevents rust and provides durability. The blade has been tapered from handle to tip to provide flexibility. With a smooth zinc alloy cap for durability and a hang hole in the handle for easy storage.250mm (10in) Stainless Steel Taping KnifeAdditional Information:• Type: Taping Knife• Size: 250mm (10in)• Blade: Stainless Steel• Handle: Bi-Material

The Stanley Stainless Steel Taping Knife has a bi-material handle for comfort and protection. Its stainless steel blade prevents rust and provides durability. The blade has been tapered from handle to tip to provide flexibility. With a smooth zinc alloy cap for durability and a hang hole in the handle for easy storage. 1 x Stanley Stainless Steel Taping Knife 200mm (8in)

Stanley Mini Fine Tip Marker Pen with quick drying, water- and oil-resistant ink, which marks on almost any surface. Supplied in a container with 72 pens. STA147324: Black ink onlySTA147329: Variety of ink colours for different applications (black, red, green and blue)1 x Tub of 72 Stanley Mini Fine Tip Marker Pens, BlackAdditional Information:• Colour: Black• Pack Qty.: 72

Stanley Mini Fine Tip Marker Pen with quick drying, water- and oil-resistant ink, which marks on almost any surface. Supplied in a container with 72 pens. STA147324: Black ink onlySTA147329: Variety of ink colours for different applications (black, red, green and blue)Tub of 72 Stanley Mini Fine Tip Marker, mixed colours for a variety of applications (black, red, green and blue).Additional Information:• Colour: Assorted• Pack Qty.: 72

The Stanley STA0-16-139 Laminate Trimmer has two spring loaded blades for trimming both sides of edging strip in one sweep. One side cuts straight while the other side can be adjusted for a tapered cut. With threaded metal inserts for repeated adjustments. It is suitable for thin laminates, veneers and edge banding and is spring loaded for adjustable cuts from 1/2-1in.

Punch through materials with ease using The Stanley 2-20-556 FatMax Jab Saw The Stanley 2-20-556 is ideal for sawing through drywall, wood and plastic. It features a sharpened tip that allows you to punch through these materials with ease and sharp tooth technology to ensure up to 50% faster cutting than traditional tooth designs. It has a hardened and tempered blade for durability and long life and moulded handle for improved comfort and control.  Features:
- Excellent for wood, plastic and drywall
- Sharpened tip punches through drywall with ease
- Triple bevelled toothing for 50% quicker easier cutting
- 7 teeth per inch, ideal for punching through plasterboard
- Anti-slip ergonomic b…

STHT1-05868 Bi-material handle provides comfort and protection. Makes carrying drywall and other boards easier. Sold in pairs.

A patented cam lock clamping feature secures workpiece for easy accurate cutting. A built-in saw stop prevents cutting into the mitre box. The mitre box has 90 and 45 mitre slots as well as 22.5 slots for octagon shapes and is of a one piece injection moulded design for extra strength. Available with or without a fine tooth tenon saw. Size 310 x 130mm Maximum depth of cut 80mm

The Stanley 0-69-014 Bradawl is ideal for boring holes The Stanley 0-69-014 Bradawl is ideal for boring holes. It features a hardened, tempered and sharpened blade for efficient performance and a plastic sleeve for effortless pushing and turning. It is extremely long-lasting and rust-resistant thanks to its Nikel coating. Features:
- Robust handle
- Rust-resistant Nikel plating
- Textured handle for improved grip
- The blade shaft is cranked to prevent it from turning in the handle
- Hardened, tempered and sharpened blades for efficient performance Specification:
- Size: 32 x 2mm
- Net weight: 0.5kg

Bi-Material handles for comfort and grip
Made from forged alloy steel
Serrated cutting edge to prevent slippage when cutting
Bi-Material handle for comfort and grip

Stanley 0-70-447 Adjustable Pipe Cutter 3-22mm
The Stanley 0-70-447 Adjustable Pipe Cutter has an all-metal body and steel guide rollers for a long service life and accuracy. The Cutter will cut metal piping in diameters from 3mm to 22mm.Features:
- Adjustable to cover range of sizes

- Durable metal body

- Replaceable cutting wheel (not included)

- Steel guide rollers for accuracy
Specification:
- Part number: 0-70-447

- Working diameter: 3mm to 22mm

This Stanley 029088, a 3 assorted Abrasive Brush Mixed Set comes with nylon, brass, and wire filling. They are suitable for a multitude of cleaning jobs.Additional Information:• Wire: Mixed Set