Tool Kits Teng Tools

17- piece rethreading set Ideal for repairing screw threads Taps to cut inside surfaces Dies to cut outside surfaces Supplied in handy storage case

The Teng T3834 is a 34 piece 3/8" drive socket set containing metric regular 6 point sockets, a fibre reinforced ratchet handle, 3" and 6" extension bars and an adaptor. The set comes supplied in a plastic case for easy storage and extra reliability. Regular sockets 3/8" drive 6 point 8, 10, 11, 12, 13, 14, 15, 17, 19mm Bits 25mm 1/4" hex 3mm flat, 4mm flat, 5.5mm flat, 3mm hex, 4mm hex, 5mm hex, 6mm hex, TX10, TX15, TX20, TX25, TX27, TX30, TX40, PH1, PH2, PH3, PZ1, PZ2, PZ3 Accessories 3/8" drive FRP ratchet, 3" and 6" extension bars, 1/2"Fx3/8"M adaptor

12 piece metric combination spanner set, chrome vanadium steel. Same dimension at both ends. The 12 point ring head is set at a 15° angle. Polished heads. Satin finish. Supplied in the unique Teng Tools TC tray with removable lid and dovetail joints for use on it’s own or as part of the Teng Tools TC control system.

Set consisting of 4 Mega Bite circlip pliers (2 straight tip and 2 bent tip pliers for internal and external circlips). Fitted with return spring. Supplied in the unique Teng Tools TC tray with removable lid and dovetail joints for use on it’s own or as part of the Teng Tools TC control system.

Set consisting of a three legged combination puller with an extra yoke for switching to two legged pulling. With reversible legs for internal and external grip. Chrome vanadium. Supplied in the unique Teng Tools TC tray with removable lid and dove tail joints for use on it’s own or as part of the Teng Tools TC control system.

8 piece screwdriver set including flat, regular and PH types with ergonomically designed bi-material handle with hanging hole. Supplied in the unique Teng Tools TC tray for use on it’s own or as part of the Teng Tools TC control system. Supplied in a handy carrying case. All Teng Tools screwdrivers are designed to have a hole in the handle which can also be used for securing the tool with a fall protection wire if needed.

Set of two flexible drivers together with 1/4" drive sockets and a selection of the most commonly used screwdriver bits. Supplied in the unique Teng Tools TC tray with removable lid and dove tail joint for use on it's own or as part of the Teng Tools TC control system. 41 piece long reach bit and socket drivers set. Comprehensive selection of 25mm 1/4"" drive hex bits included. 1/4"" drive regular sockets from 4 to 13mm. 555mm long flexible drivers with a 1/4"" hexagon end or a 1/4"" drive square drive end. Ideal for use in difficult to reach places. Supplied in the unique Teng Tools drawer width TTX tray. Use on it's own or as part of the Teng Tools ""Get Organised"" system.

Set of 5 files, flat, hand, half round, round, three square. Supplied in the unique Teng Tools TC tray with removable lid and dove tail joints for use on it’s own or as part of the Teng Tools TC control system.

Set of 3 roll / heel bars Imperial sizes Roll heads for excellent leverage Pointed taper ends for lining up drift Ideal for levering, positioning and aligning

The Teng T1424 is a 1/4'' drive socket set containing 6 point sockets, fibre reinforced ratchet handle, coupler adaptor, 3/8"-1/4" adaptor, 2" and 4" extension bars, universal joint, 3 hex keys and 11 bits. The set comes supplied in a plastic case for an easy storage solution. Socket regular 4 5 5.5 6 7 8 10 11 12 13mm Socket deep 6 7 8 10 12 13mm Bits for hex holes 5 6mm Bits for TX-heads 10 15 20TX Bits for slotted heads 0.8×4 1.2×5.5mm Bits for Phillips-heads No 1 2 Bits for Pozidriv-heads No 1 2 Hex keys 1.5 2 2.5mm

Socket set containing 12 point sockets. Supplied in the unique Teng Tools TC tray with removable lid and dovetail joints for use on it’s own or as part of the Teng Tools TC control system.

Set containing 16 deep 6 point sockets 3/8” drive. Supplied in the unique Teng Tools TC tray with removable lid and dovetail joints for use on it’s own or as part of the Teng Tools TC control system.

Set of 28 ball point hex keys, (metric and AF) and TX keys. Supplied in the unique Teng Tools TC tray with removable lid and dovetail joints for use on it’s own or as part of the Teng Tools TC control system.

A handy set of knives for different uses in one convenient set. Supplied in the unique Teng Tools TC tray with removable lid and dovetail joints for use on it’s own or as part of the Teng Tools TC control system.

Combined 9 piece set containing 6 punches, 2 cold chisels and a centre punch. Supplied in the unique Teng Tools TC tray with removable lid and dovetail joints for use on it’s own or as part of the Teng Tools TC control system.

Set containing 20 bits, regular and long for internal TX heads. Also includes 2 adaptors and a 2mm hex mini screwdriver for tightening the retaining grub screws in the adaptors. Supplied in the unique Teng Tools TC tray with removable lid and dove tail joints for use on it’s own or as part of the Teng Tools TC control system.

1/2in Drive 10 piece metric socket set. Contains sizes 10-24mm. Made from top grade chrome molybdenum alloy steel. In accordance with GGG-W-660A. Especially developed for air tool usage.