Other Hand Tools

Number punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Set contains 0-9 with the latter invert more→ed to double up as a 6. Packed in attractive plastic box.Size. 5mm (3/16 in).Additional Information:• Character Height: 5mm

Number punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Set contains 0-9 with the latter invert more→ed to double up as a 6. Packed in attractive plastic box.Size. 6mm (1/4 in).Additional Information:• Character Height: 6mm

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel p more→unch.Size 1.6mm (1/16 in).Additional Information:• Type: Parallel Pin Punch• Point Diameter: 1.6mm• Length: 95mm• Pin Length: 12.7mm (1/2 in)

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel p more→unch.Size 6.4mm (1/4 in).Additional Information:• Type: Parallel Pin Punch• Point Diameter: 6.4mm• Length: 114mm• Pin Length: 33mm (1 5/16 in)

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel p more→unch.Size 3.2mm (1/8 in).Additional Information:• Type: Parallel Pin Punch• Point Diameter: 3.2mm• Length: 102mm• Pin Length: 19mm (3/4 in)

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel p more→unch.Size 3/32in.Additional Information:• Type: Parallel Pin Punch• Point Diameter: 2.4mm• Length: 102mm• Pin Length: 19mm (3/4 in)

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel p more→unch.Size 9.5mm (3/8 in).Additional Information:• Type: Parallel Pin Punch• Point Diameter: 9.5mm• Length: 133mm• Pin Length: 44mm 1 3/4 in)

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel p more→unch.Size 8mm (5/16 in).Additional Information:• Type: Parallel Pin Punch• Point Diameter: 8.0mm• Length: 127mm• Pin Length: 38mm (1/1/2 in)

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel p more→unch.Size 4.0mm (5/32 in)Additional Information:• Type: Parallel Pin Punch• Point Diameter: 4.0mm• Length: 105mm• Pin Length: 22mm (7/8 in)

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel p more→unch.Size 5.5mm (7/32 in).Additional Information:• Type: Parallel Pin Punch• Point Diameter: 5.5mm• Length: 111mm• Pin Length: 29mm (1 1/8 in)

The Priory 124 Series Round Head Centre Punches are high quality, British manufactured punches. They are made from high quality carbon steel and heat-treated to exact tolerances. Precisely knurled bod more→y for firm grip. Specifications Tip 12.7mm (1/2in). Length 180mm (7in).

The Priory 124 Series Round Head Centre Punches are high quality, British manufactured punches. They are made from high quality carbon steel and heat-treated to exact tolerances. Precisely knurled bod more→y for firm grip. Specifications Tip 9.5mm (3/8in). Length 150mm (6in).

Priory 44 Series Centre Punch with a square head which gives a good striking area and prevents the punch from rolling. Its precisely knurled body provides a firm grip. Heat treated for long life.Size more→1.5mm (1/16 in).Length 100mm (4 in)Additional Information:• Length: 100mm (4in)• Tip: 1.5mm

Priory 44 Series Centre Punch with a square head which gives a good striking area and prevents the punch from rolling. Its precisely knurled body provides a firm grip. Heat treated for long life.Size more→6.0mm (1/4 in)Length 100mm (4 in)Additional Information:• Length: 100mm (4in)• Tip: 6.0mm

Priory 44 Series Centre Punch with a square head which gives a good striking area and prevents the punch from rolling. Its precisely knurled body provides a firm grip. Heat treated for long life.Size more→3mm (1/8 in).Length 100mm (4 in)Additional Information:• Length: 100mm (4in)• Tip: 3.0mm

Priory 44 Series Centre Punch with a square head which gives a good striking area and prevents the punch from rolling. Its precisely knurled body provides a firm grip. Heat treated for long life.Size more→5mm (3/16 in).Length 100mm (4 in)Additional Information:• Length: 100mm (4in)• Tip: 5.0mm

Priory 44 Series Centre Punch with a square head which gives a good striking area and prevents the punch from rolling. Its precisely knurled body provides a firm grip. Heat treated for long life.Size more→2.5mm (3/32 in).Length 100mm (4 in)Additional Information:• Length: 100mm (4in)• Tip: 2.5mm

Priory 44 Series Centre Punch with a square head which gives a good striking area and prevents the punch from rolling. Its precisely knurled body provides a firm grip. Heat treated for long life.Size more→4mm (5/32 in).Length 100mm (4 in)Additional Information:• Length: 100mm (4in)• Tip: 4.0mm

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 10mm (3/8 in)Additional Info more→rmation:• Diameter: 10mm (3/8in)

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 11mm (7/16 in)Additional Inf more→ormation:• Diameter: 11mm (7/16in)

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 13mm (1/2 in)Additional Info more→rmation:• Diameter: 13mm (1/2in)

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 14mm (9/16 in)Additional Inf more→ormation:• Diameter: 14mm (9/16in)

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 16mm (5/8 in)Additional Info more→rmation:• Diameter: 16mm (5/8in)

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 19mm (3/4 in)Additional Info more→rmation:• Diameter: 19mm (3/4in)