Screwdrivers Wera

Wera Wera 7440/41/42 Adjustable Torque Screwdriver Set 27 Pieces

Wera torque screwdriver set. Two high precision torque screwdrivers with variable torque settings. One torque screwdriver with Kraftform pistol handle for the transfer of especially high torque; multi more→-component for high working speeds and particularly ergonomic screwdriving. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes a bit assortment in a high quality and stable plastic case. Features and Benefits: • Kraftform …

294.00Buy!
£

Wera Wera Tyre Pressure Control System Assembly Set for TPMS 12 Piece

Delivery: to United Kingdom

Report

27 Piece Adjustable Torque Screwdriver set with patented Kraftform handle and Rapidaptor quick release 1/4" bit holder. The torque setting is quick and easy to adjust. Pistol grip for easier and safer more→use at the higher torque levels. The bit holder is suitable for all standard 1/4" screwdriver bits. Torque Range: 0.3 to 6.0 Newton Metres. This set comes in a quality storage case containing 3x Torque Screwdrivers and a range of high quality screwdriver bits. Measurment accuracy +/- 6% in accordnace with EN ISO 6789 Contents Includes: 1x Torque Screwdriver 0.3 - 1.2Nm 1x Torque Screwdriver 1.2 - 3.0Nm 1x Torque Screwdriver 3.0 - 6.0Nm 3x Calibration certificates 6x Hex Plus: 2.0, 2.5, 3.0,

294.00Buy!
£

Wera 7440/41/42 Torque and Bit Set 0.3Nm - 6Nm

Delivery: to United Kingdom

Report

Assembly set for tyre pressure control systems. All new cars in the EU have been required to have a tyre pressure control system fitted since 1 November 2011. There are various models, but they are al more→l fitted and serviced with torque technology. Aware that the assembly and servicing of these diverse models was now a matter of safety for all car drivers, we searched for a tool set that can be used with as many different systems as possible. We began by asking garages about their most frequently-used models and the requirements demanded of their tools. We learned that garages often use torque tools with the desired torque value being set by hand. This manual adjustment creates uncertainty

from £256.24 up to £292.95

Wera 7443/12 Tyre Pressure Control System Assembly Tool Kit 5074746001

from £286.95

Wera 7443/61/9 Tyre Pressure Control System Assembly Tool Kit 5074745001

12-piece tool set for the proper assembly and disassembly of tyre pressure control systems. Comes with torque technology for controlled screw tightening. Hand tool with multi-component Kraftform handl more→e for high working speeds and ergonomic working. Five pre-set tools to connect the union nut with the screw and to fasten the sensor component to the valve. Two pre-set valve insertion tools with 0.25 and 0.45 Nm. An adjustable Kraftform pistol handle for torque values of between 4.0 and 8.8 Nm. Suitable for all customary tyre pressure control systems. Dependable fastening thanks to distinctly coloured marking of the pre-set torque values (Beru/Huf®: TX 10 yellow 1.25 Nm; Schrader®: TX 10 green 1.…

from £278.95

Wera 7440/41 Torque and Bit Set 0.3Nm - 3Nm

9-piece tool set for the proper assembly and disassembly of tyre pressure control systems. Comes with torque technology for controlled screw tightening. Hand tool with multi-component Kraftform handle more→for high working speeds and ergonomic working. Two pre-set tools to connect the union nut with the screw and to fasten the sensor component to the valve. An adjustable Kraftform pistol handle for torque values of between 4.0 and 8.8 Nm. Two TX bits with holding function, socket adaptor, two sockets plus a valve dolly (for applications up to 4.5 Nm). Suitable for tyre control, systems from e.g. Schrader®, Alligator®, VDO®. Features and Benefits: • Assembly set for tyre pressure control sys…

from £179.95 up to £225.95

Wera Torque Set Black 5130110001

Wera torque screwdriver set. Two torque screwdrivers with variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read more→scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Includes bit assortment in a high quality and stable plastic case. Features and Benefits: • Kraftform torque screwdriver set • Suitable for bits with 1/4" hex head drive • With Hex-Plus, TORX® and TORX PLUS® bits • In a stable case • High precision C…

from £175.94 up to £209.95

Wera Kraftform Kompakt VDE Insulated Torque Set 1.2 - 3Nm Kraf

Click turning moment wrench in unmistakable Wera design. Very robust design with high accuracy according to DIN EN ISO 6789-1:2017-07. Easy adjustment and saving of the default value. The audible and more→tactile engagement when the scale values are reached additionally facilitates the safe setting of the desired torque value. FEATURES:- easy adjustment and securing of the desired turning moment value with audible and tactile engagement when the scale values are reached (click 1)- safely dosed force: the turning moment wrench triggers audibly and perceptibly when the set value is reached (click 2)- the precision is +/- 4% according to DIN EN ISO 6789-1:2017-07- Set including nut adapter and extension- …

from £191.95 up to £239.99

Wera Wera Kompakt KK VDE 15 Piece Insulated Torque Screwdriver Set

15-piece torque VDE interchangeable blade set. Includes 14 blades (12 of which with a reduced diameter) with integrated insulation protection. Torque VDE holder with adjustable torque from 1.2-3.0 Nm. more→Kraftform Plus handle: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Features and Benefits: • Kraftform Kompakt VDE torque screwdriver set with adjustable torque • Adjustable Kraftform VDE torque holder exclusively for Wera VDE interchangeable blades • VDE interchangeable blades 154 mm long • In robust pouch • 15-piece Contents: 1x Kraftform Kompakt VDE 15 Torque 1.2-3.0 Nm extra slim 1, 15 pieces; 1x Series 7400 VDE Kraftform …

Wera Wera 05134019001

184.72Buy!
£

Idealo.co.uk

Delivery: in United Kingdom

Report

ESD Screwdriver / Screw Type Torx / Included Size (Phillips) PH000 / Included Size (Torx) T8

175.00Buy!
£

Wera 2090 Impact Driver Handle 5072014001

Delivery: to United Kingdom

Report

Adjustable 1,000V insulated VDE torque screwdriver set containing 14 Kraftform Kompakt VDE interchangeable screwdriver blades. The torque range of 1.2 to 3.0 Newton Metres is quick and easy to change more→without any special tools. Distinctly audible and noticeable excess load signal when the pre-set value is exceeded, and unlimited torque for manual loosening jobs. Each Kraftform Kompakt VDE tool has been tested individually to 10,000 volts, in accordance with DIN EN 60900 (IEC 60900:2004). This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. Accuracy ± 6% (EN ISO 6789). This 15 piece set features a range of the Kompakt VDE Extra-Slim

from £167.95

Wera 9712 14 Piece Torx Set in Foam Insert Tray 5150103001

High quality impact driver that can loosen rigid connections without the use of power tools simply by the force of the impact. The Wera impact drivers have a particularly high efficiency thanks to the more→ir robust, double-curved design. Impact forces are converted into rotary motion. The use of compressed air equipment becomes unnecessary. For M 4 to M 8 screws. Drive: 5/16" hexagon socket. Features and Benefits: • 2090 impact driver, 90 Nm • To loosen and tighten screws without the use of power tools • Impact forces are converted into rotary motion • The double-curved design is particularly efficient • 5/16" hexagon socket take-up Contents: 2090 Impact driver 90 Nm, 5/16" …

from £164.95

Wera Kraftform ESD Micro Adjustable Torque 2.5Nm - 8Nm 1460 ES

Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet, equipped with 14 Wera TORX® screwdrivers (workshop, Kraftform Micro and T-handl more→e) with holding function for TORX® screws.Features and Benefits:• High-quality, durable foam insert without chemical vapours• Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed• Optimum fit for the best possible removal of the tools from the foam insert• Water- and oil-repellent, low maintenance and easy to clean• Protection of the tool from dirt and impactContents:1x 9712 Foam insert TORX® HF screwdriver set 1, 14 pieces; 6x …

from £146.31 up to £179.99

Wera Wera Kraftform Kompakt W Imperial 1 (05135871001)

With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed within the measuri more→ng range with the extra tool 05137004001. Afterwards you can check the set value using an off-the-shelf torque tester. Compact handle/interchangeable blades system for torque-controlled precision screwdriving. The Kraftform Micro ESD torque screwdriver is ideal for torque-controlled jobs on electrostatically sensitive components. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Tamper-proof. Clearly audible and tactile signal when the set torque …

149.99Buy!
£

Idealo.co.uk

Delivery: in United Kingdom

Report

Screwdriver Set / Output Size 1/4" / Screw Type Torx / 154 mm Length / Included Size (Torx) T25

Wera 9710 18 Piece Set in Foam Insert Tray 5150101001

from £145.95

Wera 9713 12 Piece Hexagon Set in Foam Insert Tray 5150104001

Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet, equipped with 16 Wera Kraftform screwdrivers (workshop, VDE, chiseldriver, Micr more→o) as well as 2 screw grippers.Features and Benefits:• Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed• High-quality, durable foam insert without chemical vapours• Optimum fit for the best possible removal of the tools from the foam insert• Water- and oil-repellent, low maintenance and easy to clean• Protection of the tool from dirt and impactContents:1x 9710 Foam insert screwdriver set 1, 18 pieces; 2x 932 A Screwdriver …

from £145.95

Wera Kraftform Kompakt 39 Piece Metal Working

Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet, equipped with 10 Wera screwdrivers (workshop, Micro and T-handle) for hexagonal more→socket screws and 2 Wera screwdrivers with hollow shaft for external hexagon screws.Features and Benefits:• Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed• High-quality, durable foam insert without chemical vapours• Optimum fit for the best possible removal of the tools from the foam insert• Water- and oil-repellent, low maintenance and easy to clean• Protection of the tool from dirt and impactContents:1x 9713 Foam …

from £141.39 up to £198.95

Wera 05057484001 Kraftform Kompakt Turbo i 1 Gearbox Screwdriver

Compact tool set with the 39 most important screwdriving tools for jobs on metal. Includes the incredibly fast ¼" Zyklop Speed ratchet and accessories; 7 manual and power tool sockets, sizes 5.5-13, 1 more→universal bit holder; 13 bits in a length of 89 mm; 6 metal twist drill bits with diameter of 3-10 mm; 1 screw gripper for firmly holding screws; 1 single-pole phase tester 247; textile box, very robust and durable; can be positioned upright in the workshop shelf for convenient storage; additional surface protection thanks to the textile outer material; low weight and volume for simplified mobility. Features and Benefits: • Incredibly fast ¼" Zyklop Speed ratchet with pivoting ratchet head an…

Wera Wera 05057485001

135.99Buy!
£

Idealo.co.uk

Delivery: in United Kingdom

Report

Screwdriver Set / Screw Type Torx / Included Size (Torx) TX10

from £91.66 up to £135.95

Wera 9740 20 Piece Torx, Hex Key and Stabila Tape Measure Set 5150140001

The Wera 05057484001 lets the user carry out screwdriving processes fasterThe Wera 05057484001 is a 16 piece insulated screwdriver set in a handy case. The set consists of 2 handles and 14 screwdriver more→bits. The Turbo handle has a part time internal gearing system that speeds up the screw-driving process by up to 4 times. The turbo facility can be turned on or off by the touch of a button. This is a mechanical innovation, not battery-powered. Features:
- Speeds up screw-driving without battery
- Turbo function is simple to operate by button
- Powerful screw-driving action
- Fine adjustment
- Maximum torque 14 Nm
- Tested to 1000V for safe working
Set contains:
- 1 x Wera Kraftform Turbo I…

from £129.31 up to £133.95

Wera Wera 7443 Pistol Grip Torque Screwdriver 4 - 8.8Nm

Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet; equipped with 9-piece Wera L-key set 950/9 Hex-Plus Multicolour 1 for hexagonal more→socket screws, 9-piece Wera L-key set 967/9 TX XL Multicolour 1 for TORX® screws, one 9500 magnet, one Stabila pocket tape measure (3 m).Features and Benefits:• Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed• High-quality, durable foam insert without chemical vapours• Optimum fit for the best possible removal of the tools from the foam insert• Water- and oil-repellent, low maintenance and easy to clean• Protection o…

129.00Buy!
£

Wera 9711 16 Piece VDE Set in Foam Insert Tray 5150102001

Delivery: to United Kingdom

Report

Adjustable Torque Screwdriver with patented Kraftform handle and Rapidaptor quick release 1/4" bit holder. Pistol grip for easier and safer use at the higher torque levels. The torque setting is quick more→and easy to adjust using the key securly stored in the handle. The bit holder is suitable for all standard 1/4" screwdriver bits. Torque Range: 4.0 to 8.8 Newton Metres. Measurment accuracy +/- 6% in accordnace with EN ISO 6789 Contents Includes: 1x Torque Screwdriver 4.0 - 8.8Nm 1x Calibration certificate

from £104.48 up to £128.95

Wera Pistol Grip Torque 1.2 - 3Nm 7400 Pistole

Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet, equipped with 14 Wera Kraftform VDE screwdrivers as well as two screw grippers. more→Features and Benefits:• High-quality, durable foam insert without chemical vapours• Screwdriver with insulated blades for safe working up to 1,000 volt, five of which with reduced blade diameter for lower-lying screws• Optimum fit for the best possible removal of the tools from the foam insert• Water- and oil-repellent, low maintenance and easy to clean• Protection of the tool from dirt and impactContents:1x 9711 Foam insert VDE screwdriver set 1, 16 pieces; 2x 162 iS PH …

from £106.99 up to £159.99