Screwdrivers Festool

The Festool Centrotec PZ1 Pozi Screwdriver Bit (50mm, Pack of 2) is the ideal choice for smaller Pozi screws, commonly encountered in furniture assembly, fitting installation, and cabinetry work. The more→PZ1 drive size handles the finer fasteners where precision matters most. Designed to insert directly into the Festool CENTROTEC tool chuck, there's no need for a separate bit holder — reducing the overall construction length and making this bit particularly well-suited to working in tight or confined spaces. Supplied as a pack of 2, you'll always have a spare to hand on the job. Features and Benefits: • Direct CENTROTEC chuck insertion — eliminates the need for a bit holder • Reduced cons…

The Festool Centrotec PH2 Phillips Screwdriver Bit is a 50mm bit supplied in a pack of 2, and represents the most commonly used drive size for general construction, joinery, and installation tasks. Th more→e PH2 drive size is the go-to choice for everyday screwdriving in wood, metal, and plastic, making it ideal for furniture assembly, kitchen fitting, door and window installation, and outdoor structures such as fences and pergolas. Like all CENTROTEC bits, it inserts directly into the tool chuck without the need for a bit holder, reducing the overall construction length and improving manoeuvrability in tight or awkward spaces. Features and Benefits: • Direct CENTROTEC chuck compatibility — no…

The Festool Centrotec PH1 Phillips Screwdriver Bit is a 50mm bit supplied in a pack of 2, designed for use with smaller PH1 fixings where precision and control are paramount. The PH1 drive size is par more→ticularly well suited to fine assembly work such as fitting cabinet hardware, installing thin rear panels, or working with smaller screws in furniture and interior joinery. Designed for direct insertion into the CENTROTEC tool chuck, this bit removes the need for a separate holder, reducing the overall construction length and making it especially practical in confined or restricted spaces. Features and Benefits: • Direct CENTROTEC chuck compatibility — no bit holder required • Chemically ni…

The Festool Centrotec Torx T30 Screwdriver Bits (50mm, Pack of 2) are designed for demanding fastening applications where a larger Torx drive is needed. The T30 size is particularly effective for stru more→ctural timber work, canopies, carports, and heavier installation tasks that call for greater torque transfer. Engineered for the Festool CENTROTEC system, these bits fit directly into the tool chuck without a bit holder, reducing overall construction length and enabling better access in tighter working conditions. They are equally suitable for use without a bit holder when required. Features and Benefits: • Direct CENTROTEC chuck compatibility — bit holder not required • Reduces overall co…

The Festool Centrotec Torx T25 Screwdriver Bits (50mm, Pack of 2) are well-suited to heavier fastening tasks, with the T25 size commonly specified for decking, fencing, pergolas, carports, and structu more→ral timber applications where a more substantial drive is required. Compatible with the Festool CENTROTEC tool chuck, these bits insert directly without the need for a bit holder, reducing the overall construction length and improving handling in restricted spaces. They can also be used independently without a bit holder for added on-site flexibility. Features and Benefits: • Direct CENTROTEC chuck compatibility — bit holder not required • Reduces overall construction length for improved ac…

The Festool Centrotec Torx T10 Screwdriver Bits (50mm, Pack of 2) are precision-engineered for fine fastening tasks where a smaller Torx drive is required. The T10 size is ideal for lighter fittings, more→smaller hardware, and delicate assemblies where control and accuracy are paramount. Designed for direct insertion into the Festool CENTROTEC tool chuck, these bits remove the need for a separate bit holder, shortening the overall construction length and making them well-suited to confined or restricted spaces. They can also be used without a bit holder for greater flexibility on site. Features and Benefits: • Direct CENTROTEC chuck compatibility — bit holder not required • Reduces overall co…

The Festool Centrotec Torx T40 Screwdriver Bits (50mm, Pack of 2) represent the largest size in this range, making them the go-to choice for heavy-duty structural applications — including large timber more→substructures, pergolas, and robust outdoor installations where maximum torque capacity is essential. Designed for seamless integration with the Festool CENTROTEC tool chuck, these bits insert directly without the need for a bit holder, shortening the overall construction length and making them practical even in confined working environments. They can also be used without a bit holder for versatility across different setups. Features and Benefits: • Direct CENTROTEC chuck compatibility — bit …

The Festool Centrotec PZ3 Pozi Screwdriver Bit (50mm, Pack of 2) is designed for larger Pozi screws, making it the ideal choice for heavy-duty applications such as structural timber work, fencing, per more→golas, carports, and the installation of heavier door and window frames. The PZ3 drive size delivers the engagement needed for larger-diameter fasteners under load. Like all bits in the Centrotec range, these insert directly into the Festool CENTROTEC tool chuck without a bit holder, reducing the overall construction length and allowing you to get into tighter spaces that would otherwise be difficult to reach. Supplied as a pack of 2, so you're always prepared on site. Features and Benefits: • …

The Festool Centrotec Torx T15 Screwdriver Bits (50mm, Pack of 2) offer a reliable solution for a broad range of fastening applications, with the T15 size commonly used in furniture assembly, fittings more→installation, and light structural work. Engineered for the Festool CENTROTEC system, these bits insert directly into the tool chuck without requiring a bit holder, reducing the overall construction length for better manoeuvrability in tighter spaces. They are equally effective when used without a bit holder where needed. Features and Benefits: • Direct CENTROTEC chuck compatibility — bit holder not required • Reduces overall construction length for improved access in tight areas • Ch…

The Festool Centrotec PZ2 Pozi Screwdriver Bit (50mm, Pack of 2) is the most versatile size in the range, covering the widest variety of general-purpose Pozi screws used across construction, joinery, more→and installation work. Whether you're fitting doors and windows, assembling furniture, or building outdoor timber structures, the PZ2 is the go-to drive size for day-to-day screwdriving. Compatible with the Festool CENTROTEC tool chuck, these bits insert directly without requiring a separate bit holder. This reduces the overall construction length, making them especially practical when working in tight or restricted areas. Packed in pairs, you have a ready replacement whenever you need one. Features …

The Festool Centrotec Torx T20 Screwdriver Bits (50mm, Pack of 2) are a popular choice for general-purpose trade work, with the T20 size widely used across furniture assembly, door and window installa more→tion, and the fitting of rear panels and strips. Built for the Festool CENTROTEC system, these bits slot directly into the tool chuck, doing away with the need for a bit holder and meaningfully reducing the overall construction length. This makes them particularly effective in recessed or confined areas. They are also compatible for use without a bit holder. Features and Benefits: • Direct CENTROTEC chuck compatibility — bit holder not required • Reduces overall construction length for im…

The Festool Fan Toolie 9 Piece Folding Hex, Slotted, Pozi and Torx Key Set is a compact, multi-driver key set offering a versatile range of drive types in a single, organised folding tool. Combining h more→ex, slotted, Pozi, and Torx keys within one folding body, this set is designed for tradespeople and contractors who need quick access to multiple fastener types without carrying separate tools. The fan-style folding design keeps all nine keys neatly stored and ready for use. Ideal for assembly work, equipment maintenance, and on-site fastening tasks, this set suits a wide range of applications across joinery, mechanical installation, and general contracting. The inclusion of both hex ball-end and …