Computer Cooling XSPC

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection.- Triple O-Ring Seal- 90° Angle- 360° Rotation- Material: Brass- Finish" Chrome- For 14mm OD Rigid Tubing- G1/4" Thread- Easy tool free installation

- Material: Brass- Black Chrome Finish- For 3/8″ ID, 5/8″ OD Tubing (10mm ID, 16mm OD)- Low profile design- G1/4″ Thread- Easy tool free coin installation- Updated Multi-Pack Packaging

XSPC RTL is a water based lubricant for bending PETG or Acrylic tubing. RTL stops the bending rubber (bend cord, silicon insert) from getting stuck inside the tube after making a tight bend. This allows you can make more complex and tighter bends without the risk of snapping the insert and ruining the bend. After completing the bend, simply rinse the tube with warm water to remove the lubricant.- Water Based Lubricant- Non-toxic- Easy Clean- Non-staining- Tested with PETG and Acrylic TubingOne 30ml bottle is enough for 1-2 builds and each 100ml bottle is enough for 3-6 builds.How to use:1. Apply a small amount of RTL to the inside of the tube2. Insert the bending rubber and twist it to coat …

Specification:- Black Chrome Finish- G1/4" Thread- Easy tool free installation

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection. - Triple O-Ring Seal- Material: Brass- Finish: Black Chrome- For 14mm OD Rigid Tubing- G1/4" Thread- Easy tool free installation- Updated Multi-Pack Packaging Only for use with 14mm PETG and Rigid Tubing Fittings

XSPC G1/4" Male to Female Rotary Fitting for use with your Watercooling setupSpecification:- Chrome Finish- 360° Rotation- G1/4" Thread- Easy tool free installation

The XSPC PWM hub can power 8 fans simultaneously, while only taking up one PWM fan header on your motherboard. With a total output of 95W (~12W per channel), the hub can be expanded with splitter cables for additional fans (channels 2-8 only).At less than 15mm thick, the hub can be tucked away behind the motherboard tray, for cable management. The hub is supplied with an adhesive hook/loops pad, making it easy to mount it anywhere in your case.The hub can also be used with 3pin fans without PWM speed control, or run PWM fans at full speed by disconnecting the motherboard PWM input cable.- Input power: 12V SATA power- Input signal connector: 4 pin PWM- Output connector: 3/4 pin x 8- Maximum power …

Material: Brass Chrome Finish For 3/8″ ID, 5/8″ OD Tubing (10mm ID, 16mm OD) Low profile design G1/4″ Thread Easy tool free coin installation

XSPC PURE is a clean, eco-friendly coolant for PC water-cooling. It’s based on a refined 8 stage, triple distilled water blend with non-toxic corrosion inhibitors, and long life non-toxic dyes (except clear which contains no dyes). It offers market leading protection for copper, brass, steel, nickel, aluminium and is safe to use on acetal and acrylic plastics. PURE has an extremely low electrical conductivity and with its range of intense colours it's the perfect coolant for PC water-cooling.

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection.

Specification:- Black Chrome Finish- Barb: 1/4 to 3/8 Barb Fitting (Black Chrome)- For 3/8" ID Tubing (10mm ID)- G1/4" Thread

The new D5 Photon Reservoir/Pump Combo V3 brings back the original Photon looks combined with the all new aRGB Lighting system + the Original Laing D5 Pump. The D5 Vario pump features exceptional performance and unrivalled reliability. The D5’s speed dial allows you to adjust the pump speed to best suit your system, and the tacho output lets you accurately monitor the pumps speed. The tube is made from a quality toughened glass, which is both crystal clear and highly resistant to staining. The aRGB lighting is now at the back of the reservoir and features a diffuser strip for a more professional look to your build. Unlike other tube reservoirs, which use cheap plastic brackets, the …

- Material: Brass- Matte Black Electroplated Finish- For 1/2" ID, 3/4" OD Tubing (12.7mm ID, 19mm OD)- Low profile design- G1/4" Thread- Easy tool free coin installation

The XSPC Photon is the ultimate tube reservoir for PC water cooling. The tube is made from a quality toughened glass, which is both crystal clear and highly resistant to staining. The aRGB lighting is now at the back of the reservoir and features a diffuser strip for a more professional look to your build. Unlike other tube reservoirs, which use cheap plastic brackets, the XSPC Photon has high quality CNC cut aluminium bracket. The bracket connects to both ends of the reservoir, which give a solid hold without blocking the view of the tube. Photon reservoirs can be mounted either horizontally or vertically. If using the Photon horizontally, make sure to keep the reservoir topped up to the …

- Material: Brass- Chrome Finish- For 7/16" ID, 5/8" OD Tubing (11.1mm ID, 16mm OD)- Low profile design- G1/4" Thread- Easy tool free coin installation- Updated Multi-Pack Packaging

XSPC Rigid Tubing Elbow Fittings are designed to connect two pieces of 14mm PETG tubing or 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection. - Triple O-Ring Seal - 90° Angle - Material: Brass - Finish: Matte Black Electroplated - For 14mm OD Rigid Tubing - G1/4 Thread - Easy tool free installation

16 piece bag of 6-32 30mm screws for attaching fans to XSPC radiators.

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection.

XSPC 1/4" Female to Female Rotary Fitting for use with your Watercooling setup Specification: Chrome Finish 360° Rotation G1/4" Thread Easy tool free installation