Other Hand Tools

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision gr more→ound point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision gr more→ound point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

The Faithfull 8 Piece Impact Rated Flat Bit Set will bore all types of timber, across or with the grain easily and cleanly. Each bit has precision ground points and cutting edges with extended spurs f more→or faster cutting. The 1/4in hex shank can be used with quick-release systems and may be used with both mains and cordless drills. Supplied in a sturdy case. Sizes 10, 13, 16, 20, 22, 25, 32 and 38mm. Overall Length 152mm.

The Faithfull fully insulated crow bar is made to BS8020 standards. With a pencil point at one end and a flat chisel edge at the other. The insulated shaft is manufactured using a solid fibreglass cor more→e which is coated with an abrasive resistant orange polymer coating. These insulated tools conform to BS80202002 for working on or near live cables. They are individually tested to 10,000 volts, and guaranteed to 1,000 volts.

This Faithfull Lip amp; Spur Wood Drill Bit has the following specification: Diameter: 10mm.Working Length: 80mm.Overall Length: 130mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the following specification Diameter 12mm. Working Length 100mm. Overall Length 150mm.

This Faithfull Lip amp; Spur Wood Drill Bit has the following specification: Diameter: 14mm.Working Length: 105mm.Overall Length: 160mm. Note: Image is for illustrative purposes only and may differ fr more→om the actual product

This Faithfull Lip amp; Spur Wood Drill Bit has the following specification: Diameter: 16mm.Working Length: 115mm.Overall Length: 180mm. Note: Image is for illustrative purposes only and may differ fr more→om the actual product

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the following specification Diameter 3mm. Working Length 30mm. Overall Length 60mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the following specification Diameter 4mm. Working Length 43mm. Overall Length 75mm.

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapi more→d clearance of waste. Ideal for use in dowelling jigs. This Faithfull Lip & Spur Wood Drill Bit has the following specification Diameter 5mm. Working Length 50mm. Overall Length 85mm.

Faithfull Long series pin punch with extended parallel shank, used for the removal of tight pin and metal dowels from mechanical fittings and machinery. Designed for heavy-duty use and made from unifo more→rmly heat treated tool steel with a round head and a knurled body for a firm grip. Set of 8 includes 1.6, 2.4, 3.2, 4, 4.8, 6, 8 and 10mm. Pin length 90mm (3.1/2in). Overall length 200mm (8in).

Faithfull Long series pin punch with extended parallel shank, used for the removal of tight pin and metal dowels from mechanical fittings and machinery. Designed for heavy-duty use and made from unifo more→rmly heat treated tool steel with a round head and a knurled body for a firm grip. Set of 8 includes 1.6, 2.4, 3.2, 4, 4.8, 6, 8 and 10mm. Pin length 90mm (3.1/2in). Overall length 200mm (8in).

Faithfull Long series pin punch with extended parallel shank, used for the removal of tight pin and metal dowels from mechanical fittings and machinery. Designed for heavy-duty use and made from unifo more→rmly heat treated tool steel with a round head and a knurled body for a firm grip. Set of 8 includes 1.6, 2.4, 3.2, 4, 4.8, 6, 8 and 10mm. Pin length 90mm (3.1/2in). Overall length 200mm (8in).

Faithfull Long series pin punch with extended parallel shank, used for the removal of tight pin and metal dowels from mechanical fittings and machinery. Designed for heavy-duty use and made from unifo more→rmly heat treated tool steel with a round head and a knurled body for a firm grip. Set of 8 includes 1.6, 2.4, 3.2, 4, 4.8, 6, 8 and 10mm. Pin length 90mm (3.1/2in). Overall length 200mm (8in).

Faithfull L-Shaped Radiator Spanner for the installation and removal of radiator valves. With a grooved Hex section for internal lugged valves and a 10mm square section for radiator vent plugs and ble more→ed screws. Zinc plated for rust protection.

These Faithfull Heavy-Duty Manhole Keys are designed to lift and remove most standard non-locking manhole covers, drain gully covers and access panels. The robust keys are zinc plated for rust protect more→ion and have rectangular T-shaped key ends and large triangular shaped handles that provide a positive grip and allow easy access for gloved hands. Pack Quantity 2

These Faithfull Heavy-Duty Manhole Keys are designed to lift and remove most standard non-locking manhole covers, drain gully covers and access panels. The robust keys are zinc plated for rust protect more→ion and have rectangular T-shaped key ends and large triangular shaped handles that provide a positive grip and allow easy access for gloved hands. Pack Quantity 2

These Faithfull Heavy-Duty Manhole Keys are designed to lift and remove most standard non-locking manhole covers, drain gully covers and access panels. The robust keys are zinc plated for rust protect more→ion and have rectangular T-shaped key ends and large triangular shaped handles that provide a positive grip and allow easy access for gloved hands. Pack Quantity 2

This Faithfull flexible scraper is ideal for removing soft carpet adhesive residues, paint, silicone joints and for many other scraping applications. Compatible with many multi-function oscillating power tools.

Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently r more→ecommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Contents 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6). Set supplied in plastic box.

Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently r more→ecommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Contents 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6). Set supplied in plastic box.