Other Hand Tools

The Flopro Mechanical Timer is made from premium-grade plastic with a manual override for added convenience. Enables automatic watering of your garden. Ideal for adding to irrigation systems or for us more→e with sprinklers to water your lawn. You can pre-set up to 120 minutes in 15-minute increments. The connectors allow a snap-fit to all watering brands. No batteries are required. Specification Hose Diameter 25mm (1in) with 19mm (3/4in) and 12.5mm (1/2in) inserts.

Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The more→handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK.1 x Footprint 11220 Brick Bolster 100mm (4in)Additional Information:• Width (mm): 100

Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The more→handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK.1 x Footprint Brick Bolster 75mm (3in)Additional Information:• Width (mm): 75

Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The more→handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK.The Footprint 1236 Brick Bolster has additional ribs spreading down the sides and the centre of the blade for added strength and a longer life. Width: 114mm (4.1/2in).Additional Information:• Width (mm): 114

The Footprint Brick Bolsters are fully drop-forged, making them ideal for heavy-duty use such as cutting bricks and other general building uses. The bolsters provide extra strength because the handle, more→blade and head are drop-forged as a whole rather than just forging the blade. The blade is specially hardened and tempered to provide a long-lasting edge. The bolsters have a domed head which helps to extend the usable life by preventing splintering and mushrooming from continued use. They are fitted with a high-quality hand guard for added safety. Manufactured to BS 3066. Made in the UK. Size 75mm (3in).

The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempere more→d for increased strength and durability. The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer. Made in Sheffield, Britain. Blade Width: 16mm.Chisel Length: 265mm.1 x Footprint 1860 Grooved Plugging ChiselAdditional Information:• Length (mm): 265• Length (in): 10.3/8• Width (mm): 16• Width (in): 45509

The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempere more→d for increased strength and durability. The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer. Made in Sheffield, Britain. Blade Width: 16mm.Chisel Length: 265mm.The Footprint 1861 Grooved Plugging Chisel is supplied with a British made high visibility, high quality protective plastic moulded grip.Additional Information:• Length (mm): 265• Length (in): 10.3/8• Width …

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The more→cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain.1 x Footprint 590 Cold Chisel 250 x 25mmAdditional Information:• Length (mm): 250• Length (in): 10• Width (mm): 25• Width (in): 1

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The more→cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain.1 x Footprint 590 Cold Chisel 300 x 25mmAdditional Information:• Length (mm): 300• Length (in): 12• Width (mm): 25• Width (in): 1

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The more→cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain.1 x Footprint 590 Cold Chisel 457 x 25mmAdditional Information:• Length (mm): 457• Length (in): 18• Width (mm): 25• Width (in): 1

This Footprint Flooring Chisel is a traditional tool for lifting floor boards, chasing plaster etc. The chisel is made from carbon steel with a hardened and tempered blade. It is forged with a domed, more→anti-mushroom head. Not suitable for use on concrete or stone. Size: 230 x 15 x 57mm (9 x 5/8 x 2.1/4in).Additional Information:• Length (mm): 230• Length (in): 9• Width (mm): 57• Width (in): 2.1/4

A 3 piece rectangular Cabinet Scraper set. Made from the finest European Steel. Ideal for the fine finishing of wood. Comprises 1 of each:- 6 x 3 inch Scraper5 x 2 1/2 inch Scraper4 x 2 inch ScraperAd more→ditional Information:• Scraper Type: Scraper Set

A 3 piece Shaped Cabinet Scraper set. Made from the finest European Steel. Ideal for the fine finishing of wood. Comprises:- 1 Oblong Scraper1 Curved Scraper1 Goose Neck ScraperAdditional Information: more→• Scraper Type: Scraper Set

The Footprint 246 Dovetail Saw is made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A he more→avy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from a attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England. Blade Length: 200mm (8in).Teeth: 20 tpi.Additional Information:• Length (mm): 200• TPI: 20• Saw Type: Brass Back

The Footprint Brick Jointer can be used to smooth and shape a mortar joint into a concave shape to keep moisture from penetrating the joint. It is made from carbon steel and is furnace hardened for a more→longer working life. Its polished finish prevents premature rusting. Size: 12mm (1/2in) x 16mm (5/8in).Additional Information:• Rake Type: Brick Jointer• Size 1 (in): 45323• Size 2 (in): 45509

3-component handles Power-Grip3 with hanging hole Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Type of driv more→e marked at end of the handle Blade from GEDORE molybdenum-vanadium-Plus tempered steel * Length not standardised Blade from molybdenum-vanadium-Plus tempered steel

3-component handles Power-Grip3 with striking cap Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Hexagon blad more→e with additional hexagon bolster Blade from GEDORE molybdenum-vanadium-Plus tempered steel Blade from molybdenum-vanadium-Plus tempered steel

3-component handles Power-Grip3 with striking cap Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Hexagon blad more→e with additional hexagon bolster Blade from GEDORE molybdenum-vanadium-Plus tempered steel Blade from molybdenum-vanadium-Plus tempered steel

Carefully hardened and tempered along the full length Striking heads inductively tempered Working edge polished and clear varnished Working edge polished and clear varnished

Carefully hardened and tempered along the full length Striking heads inductively tempered Working edge polished and clear varnished Working edge polished and clear varnished

DVI-20Z 2000N.m Torque multiplier

DVV 13Z 1300N.m Torque multiplier

Manual bending tool set 6-15 mm in L-BOXX 136