Bits & Sockets Sets

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 51 • Cut Length Imperial: 2 • Overall Length Metric: 116 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. To suit 4mm thick strip of 20mm width. Intumescent strip is used to create an effective barrier to both fire and smoke. Choose alternative bearings to suit other thicknesses of intumescent strip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 20 • Overall Length Metric: 72 • Bearing Dia Metric: 32 • Rebate Metric: 4 • Type or Grade: 20mm strip

Ideal for speaker cabinets and drawer construction. Please note. This tool cannot be re-sharpened. Inverted use only. Use on MDF and natural timbers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 68 • Cut Length Metric: 30 • Overall Length Metric: 69.5 • Type or Grade: 15 to 25mm • Angle: 45

Self-guiding cutter with facility to change profile by fitting larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Metric: 17.5 • Overall Length Metric: 67 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 31.7 • Overall Length Metric: 71 • Radius 1 Metric: 9.5

Especially designed for routing Corian which is used in many bathrooms and kitchens. For trimming bowls, trepanning and face milling. Can also be used for trimming and face milling of timber. Specifications: • Shank Diameter: 1/2 • Dia Metric: 52.3 • Cut Length Metric: 6.5 • Overall Length Metric: 83

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Specifications: • Dia Metric: 50 • Sawbore: 12 • Saw Kerf Metric: 8 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 8 • Saw Teeth: 4

Precision made Carbon Steel plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. High precision CNC ground flutes for improved quality of cutting edge geometry and precise diameter tolerance. These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to bed of drilling machine. Precision ground internal bore with slight conical shape to ensure precise plugs are bored. Large withdrawing zone to enable easy removal of the plug and variable length plugs to be created. Shanks ground to reduce vibration and improve the quality of the cut. Do not use these tools on abrasive …

• Comprehensive and exciting range of Premier Line tool trays.• Designed to fit the AP24 Topchest, Rollcab and Workstation range and a selection from our Superline PRO® range, these trays are available in over 30 different configurations.• The tools have been carefully selected for the professional technician from our Premier Line range.• Design your own tool kit by purchasing the trays separately, or take advantage of our specially selected combination deals.• Tray Size (W x D x H): 176.5 x 397 x 55mm.• Lifetime guarantee*.• Tool Tray with 43pc 1/4"Sq Drive Socket Set.• Suitable for AP24 Series and selected Superline PRO® tool chests.Tool Tray with 1/4"Sq Drive Socket Set. Suitable for sele…

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

It includes a fine adjustment device and is compatible with routers. The Parallel Guide enables parallel routing next to the workpiece edge.Parallel guide• Parallel Routing• Parallel Guide enables parallel routing next to the workpiece edge• Includes fine adjustment device• Compatible with routersSpecifications:Diameter mm: 10,00

With internal thread: M16
#12 Spreader Inserts for Bearing Puller
Internal thread M16
RFID chip set, 2 pieces
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

This versatile set includes a wide array of impact-rated drill bits and screwdriver bits, ensuring you have the right tool for every task. Engineered for impact drivers, these bits deliver superior performance and longevity, making them ideal for demanding applications. The set covers a variety of sizes and types, providing flexibility for a range of projects. The high-quality materials and advanced manufacturing techniques result in bits that withstand the rigors of heavy-duty use. The set is neatly organized in a sturdy case for easy storage and transport. Features & Benefits • The medium tough case includes impact ready accessories and small bulk storage • Connects with both small …

• Part of the Siegen by Sealey range of quality tools at competitive prices.• Professional socket set manufactured from hardened and heat treated Chrome Vanadium steel.• Fully polished with a mirror finish.• Covers sizes from 4 to 32mm.• Includes 72-tooth comfort grip ratchet wrenches, spark plug sockets, extension bars, socket bits, bits, spinner handle and accessories.• Supplied in storage case.• Lifetime guarantee*.Professional socket set manufactured from hardened and heat treated Chrome Vanadium steel. Fully polished with a mirror finish. Covers sizes from 4 to 32mm. Includes 72-tooth comfort grip ratchet wrenches, spark plug sockets, extension bars, socket bits, bits, spinner handle and acc…

Popular rebate sets, which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces.When using bearing Ref. B95A, make two passes when a full depth of cut is required by using a larger bearing first. Specifications: • Shank Diameter: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 52

Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces.When using bearing Ref. B95A, make two passes when a full depth of cut is required by using a larger bearing first. Specifications: • Shank Diameter: 8 mm • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 55