Bits & Sockets Sets

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine' V' groove point. Ideal for sign writing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 14.5 &bu more→ll; Cut Length Metric: 12.5 • Overall Length Metric: 57 • Angle: 60

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine ' V' groove point. Ideal for sign writing. Specifications: • Shank Diameter: 8 mm • Dia Metric: 14.5 & more→bull; Cut Length Metric: 12.5 • Overall Length Metric: 57 • Angle: 60

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric more→: 19 • Overall Length Metric: 61 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 10

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/2 • Dia Metric: 27 • Cut Length Metri more→c: 17 • Overall Length Metric: 65.6 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 17

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/4 • Dia Metric: 27 • Cut Length Metric more→: 17 • Overall Length Metric: 56.1 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 17

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.1 • Cut Length Metric: 20 • Overall Length Metric: 70 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 14.2 • Radius 1 Imperial: 9/16

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 44.5 • Cut Length Metric: 22 • Overall Length Metric: 71 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 16

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Cut Length Metric: 25 • Overall Length Metric: 75 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4

Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should be fitted to component. Specifications: • Shank more→Diameter: 1/2 • Dia Metric: 26 • Dia2 Metric: 12.7 • Cut Length Metric: 35 • Overall Length Metric: 84.5 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 80

Ideal for newel posts and caps for stairs. Supplied with one bearing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 35.1 • Cut Length Metric: 12 • Overall Length Metric: 5 more→7 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 45

Ideal for newel posts and caps for stairs. Supplied with one bearing. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35.1 • Cut Length Metric: 12 • Overall Length Metric: 6 more→7 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 45

Ideal for newel posts and caps for stairs. Supplied with one nylon bearing allowing use with solid surface material. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Im more→perial: 1 5/8 • Cut Length Metric: 20 • Overall Length Metric: 69 • Bearing Dia Metric: 12.7 • Angle: 45

Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. Allows for irregular grained timber to be profiled more more→easily, by turning component other way up. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 90 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: more→48 • Cut Length Metric: 22 • Overall Length Metric: 68 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 15.9 • Radius 1 Imperial: 5/8

Scribing cutter to suit glazing bar ovolo. Designed for sash bar window construction. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 20 • Overall Leng more→th Metric: 48.6 • Radius 1 Metric: 10

• NON-SPARKING SAFETY TOOLS – Part of the Sealey Premier Range of Non-Sparking tools suitable for professional daily use. • BERYLLIUM COPPER – Manufactured from non-sparking but physically tough and n more→on-magnetic copper meeting requirements of ATEX Directive for zones 0, 1 and 2. • FOR USE IN ENVIRONMENTS OF RISK – Beryllium copper is resistant to non-oxidising acids making it resistant to abrasive wear and galling. • DIE FORGED – Heat treated for increased strength, durability, and electrical conductivity. • 12PT WALLDRIVE SOCKET – Designed to grip the flats of the fixing allowing for 30% more torque to be applied than traditional hex sockets without causing damage. • 1/2”SQ DRIVE – 23mm Socket with…

Expert Sds Plus-7x Concrete Drill BitsSpecifications:- Diameter: 18.0mm- Working Length: 950mm- Total Length: 1.000mm

A selection of Dormer Rotary Burr Bits Specifications: Rotary Burr - Cylinder without endcut (P6019.6X6.0) • Shank Size: 6mm • Diameter: 9.6mm • Cutter Length: 19mm • Total Length more→: 64mm • Shape: A • Application: Cylinder without endcut Rotary Burr - Ball Nosed Cylinder (P6059.6X6.0) • Shank Size: 6mm • Diameter: 9.6mm • Cutter Length: 19mm • Total Length: 64mm • Shape: C • Application: Ball Nosed Cylinder Rotary Burr – Ball (P6079.6X6.0) • Shank Size: 6mm • Diameter: 9.6mm • Cutter Length: 8mm • Total Length: 54mm • Shape: D • Application: Ball Rotary Burr - Ball Nosed Tree (P6119.6X6.0) • Shank Si…

The Facom 1/2" Drive Non-Sparking Bi Hexagon Socket Metric is designed for maximum safety and performance in hazardous environments. Ideal for use in industries such as oil and gas, chemical processin more→g, and mining, this socket is crafted from high-quality copper beryllium alloy, ensuring it is non-sparking and safe for use in explosive atmospheres. With its bi-hexagon (12-point) design, this metric socket provides a secure grip on fasteners, reducing the risk of rounding and ensuring efficient torque transfer. The 1/2" drive size is compatible with a wide range of ratchets and torque wrenches, offering versatility and ease of use in various applications. The corrosion-resistant finish enhances …

The Facom 1/2" Drive Non-Sparking Bi Hexagon Socket Metric is designed for maximum safety and performance in hazardous environments. Ideal for use in industries such as oil and gas, chemical processin more→g, and mining, this socket is crafted from high-quality copper beryllium alloy, ensuring it is non-sparking and safe for use in explosive atmospheres. With its bi-hexagon (12-point) design, this metric socket provides a secure grip on fasteners, reducing the risk of rounding and ensuring efficient torque transfer. The 1/2" drive size is compatible with a wide range of ratchets and torque wrenches, offering versatility and ease of use in various applications. The corrosion-resistant finish enhances …

Furniture and kitchen assembly.
Installation of fittings, back walls, strips
Mounting doors and windows.
Screw work in wood, metal and plastic.
Fences, pergolas, carports, canopies.