Bits & Sockets Sets

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow more→, constant feed rate ensuring timber is clamped to bed of drilling machine. Do not use these tools on abrasive timber or hard plastics or metal. Not suitable for use with a router. Not for use with hand held power tools or routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Metric: 96.52 • Overall Length Metric: 160.2

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow more→, constant feed rate ensuring timber is clamped to bed of drilling machine. Do not use these tools on abrasive timber or hard plastics or metal. Not suitable for use with a router. Not for use with hand held power tools or routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 76.2 • Overall Length Metric: 139.7

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow more→, constant feed rate ensuring timber is clamped to bed of drilling machine. Do not use these tools on abrasive timber or hard plastics or metal. Not suitable for use with a router. Not for use with hand held power tools or routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 76.2 • Overall Length Metric: 139.7

Weller spare tip for WSTA-1 Pyropen. Size 2.4 mm (chisel tip).

Replacement jig body for the CDJ300.

Worktop Jig Accessory for making fast, accurate angled worktop joints to accommodate out of square walls ADAPTABLE ANGLE RANGE Can be used for acute and obtuse wall angles up to 25 degrees out of squ more→are COMPATABILITY Works with Trend KWJ 750P Pro, KWJ 900P Pro, KWJ 700, KWJ 700S, KWJ 900 worktop jigs and jigs up to 12mm thick EASY SETUP Fast alignment to the worktop edge ensures correct backset position SIMPLE FOUR STEP PROCEDURE Measure, Mark, Clamp, Cut PRECISION FIT Front edge pivot point alignment ensures the backset is correctly set to match the female cut MULTI-PROFILE Works with any worktop edge profile from square edge to full bullnose QUALITY CONSTRUCTION Made from solid aluminium …

Panel bolt connectors to connect worktop joint together. Requires 10mm A/F spanner to tighten. Pack of 10 Specifications: • Overall Length Metric: 150 • Type or Grade: metal • Pack more→Qty: 10 pack Contents: 10 x Metal ended worktop connectors

• Most popular size SDS Plus drill bits included in one set.• Professional quality steel for SDS Plus and Roto-Stop machines only.• Supplied in sturdy storage case.• Contents: SDS Plus Drill Bits;  more→48;5.5 x 160, 6 x 160, 7 x 160, 8 x 210, 10 x 210, 10 x 260, 12 x 210, 12 x 260, 14 x 260mm, SDS Plus Chisels; Point, Gouge, Flat (20mm), Wide (40mm).Most popular size SDS Plus drill bits included in one set. Professional quality steel for SDS Plus and Roto-Stop machines only. Supplied in sturdy storage case.Technical Specification:Contents: SDS Plus Drill Bits; ø5.5 x 160, 6 x 160, 7 x 160, 8 x 210, 10 x 210, 10 x 260, 12 x 210, 12 x 260, 14 x 260mm, SDS Plus Chisels; Point, Gouge, Flat (2…

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø9 x 120mmDimensions: Length: 5mm x Height: 185mmWeight: 0.046KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 400mmDimensions: Length: 1mm x Height: 580mmWeight: 0.106KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 300mmDimensions: Length: 5mm x Height: 380mmWeight: 0.084KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 250mmWeight: 0.039KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 200mmDimensions: Length: 1mm x Height: 280mmWeight: 0.056KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 150mmDimensions: Length: 3mm x Height: 230mmWeight: 0.045KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 120mmWeight: 0.037KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø7 x 300mmWeight: 0.021KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry products. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. more→For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø7 x 150mmDimensions: Length: 5mm x Height: 230mmWeight: 0.03KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø7 x 100mmDimensions: Length: 3mm x Height: 182mmWeight: 0.02KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø6 x 150mmDimensions: Length: 10mm x Height: 235mmWeight: 0.03KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø6 x 100mmDimensions: Length: 6mm x Height: 98mmWeight: 0.01KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø6.5 x 300mmDimensions: Length: 5mm x Height: 380mmWeight: 0.066KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø6.5 x 150mmDimensions: Length: 5mm x Height: 230mmWeight: 0.03KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø6.5 x 100mmDimensions: Length: 30mm x Height: 182mmWeight: 0.02KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø5 x 150mmDimensions: Length: 5mm x Height: 240mmWeight: 0.024KgWarranty: Consumable