Bits & Sockets Sets

Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 20 • Cut Length Metric: 14 • Overall Length Metric: 57 • Angle: 80

Trend Craft Pro 1/2in shank bearing guided chamfer cutter - 51mm diameter Two Flute Carbide tips. 1/2in shank with 19.1mm cutting depth for heavy duty work, architectural joinery and general chamfering work. 45¡ bearing guided chamfer profile follows straight and curved profiles for crisp, professional detailing work on an edge. Ideal for table use to cut mitred corner joints for box making work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Cut Length M…

Trend Craft Pro 1/2in shank bearing guided round over router cutter - 12.7mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. 12.7mm radius will cut full bullnose profile for detailing work on 1in/25mm stock. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: • …

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 8 mm • Dia Metric: 38 • Dia Imperial: 1 1/2 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 70.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2

Panel mould and edge mould cutter. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 8 • Overall Length Metric: 36.6 • Radius 1 Metric: 12

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 11.8 • Overall Length Metric: 48.9 • Bearing Dia Metric: 9 • Radius 1 Metric: 4.8

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Ideal for cutting kitchen worktops. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 63 • Overall Length Metric: 115

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 15 • Dia Imperial: 19/32 • Cut Length Metric: 25 • Overall Length Metric: 65

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 21 • Dia Imperial: 53/64 • Cut Length Metric: 19 • Overall Length Metric: 50

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 24 • Dia Imperial: 61/64 • Cut Length Metric: 19 • Overall Length Metric: 59

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22.2 • Dia Imperial: 7/8 • Cut Length Metric: 31 • Overall Length Metric: 73

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 15 • Dia Imperial: 19/32 • Cut Length Metric: 25 • Overall Length Metric: 67

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 21 • Dia Imperial: 53/64 • Cut Length Metric: 19 • Overall Length Metric: 59

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 24 • Dia Imperial: 61/64 • Cut Length Metric: 19 • Overall Length Metric: 50

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 15 • Dia Imperial: 19/32 • Cut Length Metric: 35 • Overall Length Metric: 76

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Short shank for Makita 3600B & 3612BR, Ryobi and Hitachi routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 63 • Overall Length Metric: 100

Two flute straight cutter with 3 degree taper. Designed for constructing wooden vacuum forming moulds. Tapered sides will allow the mould to release easily. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Overall Length Metric: 80 • Angle: 87

For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 105

• One of a comprehensive range of Premier Non-Sparking Safety Tools, suitable for daily professional use.• Manufactured from Beryllium Copper.• Die forged.• WallDrive® 12-point socket configuration.• Lifetime guarantee*.Manufactured from Beryllium Copper. Die forged. WallDrive® socket configuration.• Manufactured from Beryllium Copper. • Die forged. • WallDrive® 12-point socket configuration. • Lifetime guarantee*. • Model No. NS042Technical Specification:Depth: StandardDrive: 1/2"SqMaterial: Beryllium CopperNett Weight: 0.090kgSize: 9mmDimensions: Length: 30mm x Height: 50mmWeight: 0.096KgWarranty: Life

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Chrome Vanadium 6150 steel bits, each size in 30 and 75mm lengths.• Hardened and tempered for added strength.• Set includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors.• Contents: TRX-Star* Bits; T20, T25, T30, T40, T45, T50, T55, T60 (1 each 30 and 75mm), Security TRX-Star* Bits; T20H, T25H, T30H, T40H, T45H, T50H, T55H, T60H (1 each 30 and 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 and 75mm), Ribe Bits; M5, M6, M7, M8, M9, M10, M12, M14 (1 each 30 & 75mm), Spline Bits; M5, M6, M8, M10, M12 (1 each 30 and 75mm), Drive Adaptors; 3/8"Sq x 10mm Hex, 1/2"Sq x 10mm Hex.• Supp…