Bits & Sockets Sets

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Single flute hel more→ical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 8 mm • Dia Metric: 6 • Cut Length Metric: 14 • Overall Length Metric: 80 • Type or Grade: Up-cut

Two flute. For trimming of laminate and solid lipping. 1.6mm deep 'V' groove to hide glue line. Specifications: • Shank Diameter: 1/4 • Dia Metric: 16 • Dia2 Metric: 12.7 • Cu more→t Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 67 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood over more→lay. For copy profiling, use the bearing to follow a template or base edge of board. A 3mm approximate overlap should be left before copy profiling. When using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 13 • Overall Length Metric: 57 • Bearing Dia Metric: 15.9

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Specifications: • D=3/8 inch • D=9.5 mm • C=25 mm more→• OL=63.5 mm • Shank Diameter=3/8 inch

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imp more→erial: 1/2 • Cut Length Metric: 10.3 • Overall Length Metric: 44.5 • Angle: 60

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.89 • Dia Im more→perial: 1/2 • Cut Length Metric: 10.3 • Overall Length Metric: 60 • Angle: 60

Ideal for posts and newel caps for stairs. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 &bu more→ll; Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Angle: 60

Two flute cutters for producing extra clean cut bevelled edges. No plunge cut. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Dia Imperial: 1 3/8 • Cut Length Metric more→: 10 • Cut Length Imperial: 25/64 • Overall Length Metric: 50 • Angle: 45

This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25. more→4 • Cut Length Imperial: 1 • Overall Length Metric: 81.5 • Bearing Dia Metric: 19.1 • Rebate Metric: 3 • Angle: 90

This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim. Specifications: • Shank Diameter: 8 mm • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 more→.4 • Cut Length Imperial: 1 • Overall Length Metric: 80 • Bearing Dia Metric: 19.1 • Rebate Metric: 3 • Angle: 90

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 8 mm • Dia Metric: 19 • Dia Imperial: 3/4 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 61 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 3.2 • Radius 1 Imperial: 1/8

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 1.6mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timb more→er and timber based materials. Leaves perfect superfine round over detail for a contemporary eased edge arris profile on straight and curved edges. Two bearings supplied for round over or quirked Ovolo moulding for additional options for fine detailing on boxes and modelmaking work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: …

Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. Specifications: • Shank Diameter: 8 mm • Dia Metric: 32 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 more→• Overall Length Metric: 62 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Angle: 45

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications: • Shank Diameter: 1/4 more→• Dia Metric: 22.2 • Dia Imperial: 7/8 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 56 • Radius 1 Metric: 11.1 • Radius 1 Imperial: 7/16

These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 15 • Cut Length Metric: 12.7 • Cut Length more→Imperial: 1/2 • Overall Length Metric: 53 • Radius 1 Metric: 2.8

Trend Craft Pro 1/2in shank worktop joint cutter - 12.7mm diameter Two Flute Carbide tips. 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs more→in tops up to 40mm thick. Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops. Carbide centre tip profile, ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: …

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 12 mm • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Cut Length Imperial: 2 • Overall Length Metric: 93.5 • Type or Grade: Centre tip

Digital depth gauge for router tables and saw benches. Horizontal and vertical measuring. For hand routers, router tables and saw benches. LCD readout for mm, imperial and fractions with auto shut more→off 5 mins. Removable pin to allow hole depths to be measured. Pin can be parked on arm. Hole depth 50.8mm (2 inch). Self standing with magnetic feet and flat back. Injection plastic moulding with plastic rule. 60mm wide aperture. Read-out has relative co-ordinate and absolute function. Includes small rebate clip that fits to the base of the rule to allow the rule to be set flush to a router table back fence. For UK sale only. Spare battery available ref. BAT/CR2032/3V. Contents: 1 x 3V …

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 4 degree shear. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 54

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Small diameter tools must be h more→andled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 3 • Cut Length Metric: 11 • Overall Length Metric: 50

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and more→below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 1.6 • Dia Imperial: 1/16 • Cut Length Metric: 5 • Overall Length Metric: 43 • Type or Grade: Solid Carbide Insert

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 70

Trend Perfect Butt Scribing Tool - for fast accurate scribing work. Multiple diameter scribing wheels allows fast scribe marking across both narrow and wider gaps. Also ideal for template making for more→spiling work. 5 different scribing diameter options using the 18mm Cap wheel, 29mm Wheel, 50mm Wheel, 70mm Wheel or 90mm Wheel. Wheels quickly interchange, slipping over the central body and rotating as the scribe is being made for easy, drag free, one handed operation. Perfect for scribing worktops, shelves, window boards, panels, cupboards and many more. Centre spring-loaded pencil for easy marking up allowing one hand to hold any work while you scribe. Contents: 1 x Pencil 1 x Body 1 x …