Bits & Sockets Sets

• Heavy-duty 4-point specialised impact socket for removing the rear hub nut on RWD Ford Transit vehicles.• Alignment shaft allows accurate location onto castellated nut.Heavy-duty 4-point specialised more→impact socket for removing the rear hub nut on RWD Ford Transit vehicles. Alignment shaft allows accurate location onto castellated nut.• Heavy-duty 4-point specialised impact socket for removing the rear hub nut on RWD Ford Transit vehicles. • Alignment shaft allows accurate location onto castellated nut. • Model No. SX138Technical Specification:Nett Weight: 1.26kgDrive: 1/2"SqStud Width: 6.8mmAlignment Shaft Diameter: ø38mmOuter Diameter: ø70mmApplication(s): RWD Ford Transit (2014on)OE…

Up-cut helical gives long lasting super fine finish. Specifications: • Shank Diameter: 1/4 • Dia Metric: 3 • Cut Length Metric: 12 • Cut Length Imperial: 15/32 • Overall Leng more→th Metric: 58 • Type or Grade: Up-cut

Up-cut helical gives long lasting super fine finish. Specifications: • Shank Diameter: 1/4 • Dia Metric: 4 • Dia Imperial: 5/32 • Cut Length Metric: 14 • Cut Length Imperial: more→15/32 • Overall Length Metric: 59 • Type or Grade: Up-cut

Up-cut helical gives long lasting super fine finish. Specifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Dia Imperial: 13/64 • Cut Length Metric: 19 • Cut Length Imperial more→: 3/4 • Overall Length Metric: 59 • Type or Grade: Up-cut

Two flute for fine finish. Specially ground for cutting acrylic. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 20 • Over more→all Length Metric: 63

Brookman cutters are in TCT grade with 3/8 B.S.F threaded shanks. Specifications: • Shank Diameter: Threaded • Dia Metric: 14.3 • Dia Imperial: 9/16 • Cut Length Metric: 11.9 &bul more→l; Cut Length Imperial: 15/32 • Overall Length Metric: 58 • Pack Qty: 1 off • Angle: 100 Contents: 1 x Brookman cutter

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Specifications: • Shank Diameter: 1/4 • Dia Metric: 29 • Cut Length Metric: 15.8 • Ov more→erall Length Metric: 52.9 • Bearing Dia Metric: 9 • Radius 1 Metric: 9.5

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 19 • Overall Length Metric: 59 • Ra more→dius 1 Metric: 6.3

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Drop-forged steel universal joint.• Suitable for use on all types of air impact tool.• Chrome Molybdenum ste more→el with phosphate finish for added corrosion resistance.• Drilled head to accept retaining pin.• Lifetime guarantee*.Drop-forged Chrome Molybdenum steel universal joint. Suitable for use on all types of air impact tool. Phosphate finish for added corrosion resistance. Drilled head to accept retaining pin.• Drop-forged steel universal joint. • Suitable for use on all types of air impact tool. • Chrome Molybdenum steel with phosphate finish for added corrosion resistance. • Drilled head to accept retai…

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driv more→ing accessory with locking pin. Some socket sizes have knurled band for extra hand grip. Sold loose.

• Fully ground HSS Cobalt drill bit manufactured to DIN 338.• 5% Cobalt helps to increase life of drill bit.• 135° Split point is self-centring for easier penetration.• Efficient clog-free swarf more→clearance.• Suitable for drilling high carbon steel and stainless steel.• High-density case for safe storage.Fully ground HSS Cobalt drill bit manufactured to DIN 338. 5% Cobalt gives increased heat hardness which helps extend the life of the drill bit. 135° Split point is self-centring which helps to reduce thrust and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for drilling high carbon and stainless steel. High-density case for safe storage.• Fully ground HSS Cob…

Five times stronger than the conventional design and tested to 500Nm. Innovative design features a protective metal colour-coded ring that prevents the socket wall spreading. Each socket is sleeved an more→d has an insert to prevent damage to alloy wheels and nuts. Features & Benefits: • Five times stronger than the conventional design and tested to 500Nm. • Innovative design features a protective metal colour-coded ring that prevents the socket wall spreading. • Each socket is sleeved and has an insert to prevent damage to alloy wheels and nuts. • Sizes: 17, 19, 21mm. • Lifetime guarantee*. • Model No. SX039 Specifications: Model No SX039 Brand: Premier Drive: 1/2"Sq Nett Weight: 0.78kg Sizes: …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Lasts up to 3 times longer than the Bosch SDS max-4 drill bit - Drilling reinforced concrete is hard work and has traditionally taken its toll on hammer drill bits.Even 4 cutting edges wear out quickl more→y, causing downtime when changing accessories and searching for supplies.The EXPERT SDS max-8X solid carbide head features an advanced 4-edge cutting design made from a single piece of the toughest metal:No binding and no weakness on impact.With Bosch Carbide Technology and solid carbide head, EXPERT SDS max-8X lasts much longer than other conventional hammer bits.Drills through rebar effectively, so there´s no need to stop, re-sight, or change bits when hitting steel.For construction professionals w…